Products

Eagle Vision Infinity Adjustable IPS Rings | PICATINNY

Eagle Vision Eagle Vision Infinity Adjustable IPS Rings | PICATINNY £68.13

PICATINNY RAIL Eagle Visions infinity adjustable scope rings are extremely high quality and beautifully finished. Designed with the goal of adjustability and range, these scope rings have a wide range of movement. You will no longer have to decide between high or low rings. This also eliminates the problem of long-range shooters running out of elevation clicks on their scope turrets. Eagle Vision Infinity adjustable scope rings are a must have for any air gunner! Equipped with extra picatinny rails on top for mounting accessories. Includes a custom waterproof accessory carrying case. *Recommended for FX Crown Airguns to clear the magazine height. Specifications 30 MM Height: 68.25 mm to 77.75 mm (adjustable) Profile Height: 23 mm Adjustable Height: 9.5 mm Weight: 81 g each Centre of the ring to the bottom of the rail: 41 mm (in closed position) Centre of the ring to the bottom of the rail: 51.5 mm (in open position) Ring size: 30 mm Rail size: 20 mm picatinny Specifications 34 MM Height: 68.25mm to 77.75 mm (adjustable) Profile Hight: 23 mm Adjustable Height: 9.5mm Weight: 81 g each Centre of the ring to the bottom of the rail: 41mm (in closed position). Centre of the ring to the bottom of the rail: 51.5mm (in open position). Ring size: 34mm Rail size: 20mm picatinny

Sold out

Eagle Vision Eagle Vision | 75% X 25% GOPRO 5,6,7 Black, Firefly S8E | Universal Scope Holder Side-Cam kit £218.81

ou may use the ‘Firefly S8E’ with a 90 degree lens, (without any modification / changing the lens), directly with this kit – Secure the camera to ‘GoPro’ housing with the supplied nylon screws. The only downside you don’t have fully access to power bottom (one third its accessible) you may need to press that with something like pen. This Kit includes: 1x Side-Cam 75% to camera, (reflection), 25% passed to your eye, (transmission) system including a rubber ring and a 0 coil eye rubber cap. Ideal for a professional who aims for better quality of recording. 1x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scope from an outer scope diameter between 40mm-46.5mm. It will find the centre automatically while you are tightening it.1x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5,6 and 7 to your side cam (please note; you are not be able to use your action camera directly without changing the lens to 12mm or 16mm Focal). 1x Case The new waterproof case will allow you to store your camera mounting system tidy and safe. 1x Lens Air Pump Dust Blower For maintenance of the Side-Cam. What’s the difference betweenthe 1/1.8 and the 1/2.3 lenses? Both lenses are 4K The 1/1.8 allows more light in.The downside is that you cannot close the ‘GoPro’ lens cover and it’s more expensive. The 1/2.3 lenses allow less light through.The upside is you can close the lens cover and it’s less expensive. Here are some valuable tips to help you record the best quality video: 1. Use a good scope with a decent lens and larger objective. 2. Use a high quality camera for recording;any action camera with a minimum HD ready at 240FPS is preferable. 3. Obtain a good quality fixed camera lens. 4. Ensure that the scope and camera are set up correctly. 5. Use lower magnification with the scope, you will notice improved quality by using a fixed magnification, eg. 10×44(We do not recommend over x 10 magnification with most common scopes on the market). 6. An optical zoom is preferred over digital zoom, which makes a lower image quality.

22 (5.5mm) – 18 shot (with magnetic lid) ** PELLETS ONLY- NOT FOR SLUGS** We’ve added some improvements such as: Easier to load Holds pellets more securely Smoother rotation Numbered magazine shot count Maximum Pellet length 11.5mm flat head 12mm dome head Magazine height: 49mm Fits the following rifles: Dreamline (all models) Maverick Crown Bobcat MK3 ***ALL SALES ARE FINAL ON THESE MAGS***

Eagle Vision | FX Magazine | Dreamline | Maverick | Crown | wildcat MK3

Fits the following rifles: Dreamline (all models) Maverick Crown Bobcat MK3 Easier to load Holds pellets more securely Smoother rotation Numbered magazine shot count .22 Cal (5.5mm) – 18 shot (with magnetic lid) .25 Cal (6.35mm) – 16 shot (with magnetic lid) Maximum Pellet & slugs length 11.5mm flat head 12mm dome head please note: this magazine are designed to be load one at the time by rotate the round pellet holder in the centre you need to ~ ensure you block the hole from underneath with your finger.some caliber like 177 and 22 can remove the magnetic cover to load like new Fx magazine with short pellets. ***ALL SALES ARE FINAL ON THESE MAGS***

Sold out

Eagle Vision | FX Magazine | FX Impact High Capacity Magazine

Eagle Vision Eagle Vision | FX Magazine | FX Impact High Capacity Magazine £90.85

Please note:this magazine is designed for slugs only. You may fit a pellet on them if the pellet diameter is not less than 5.70mm (we don’t guarantee). The spring’s tension is set to 2 full turns for slugs. If you are using soft lead pellet you may need to reduce attention to 1 to 1.25 of a turn. You may be unable to fit our magazines to your gun If you are using after market non standard or non factorry original part such as Brass Inlet Transfer Port . Before purchase this you need to make sure all your rifle part is original. We do not accept return if magazines get dent or scratched for that reason. This is a high capacity magazine, designed for the FX Impact platform. It is made from aluminium and cut by CNC machine. Improvements include: Magnetic cover Higher capacity Easy load Secure pellet retention Very smooth rotation Numbered shot count 22 (5.5mm) – 27 shots 25 (6.35mm) – 26 shots 30 (7.62mm) – 22 shots This package includes: 1 x 3mm Allen key6x rubber ball holder 1x waterproof storage case Please note: This product will not fit the early model FX Impacts (MK1/2) unless they have been fitted with the adapter plate to accept larger capacity magazines. ***ALL SALES ARE FINAL ON THESE MAGS***

Sold out

Eagle Vision Eagle Vision | FX Panthera | FX King High Capacity Magazine £56.78

22 (5.5mm) – 18 shot (with magnetic lid) We’ve added some improvements such as: Easier to load Holds pellets more securely Smoother rotation Numbered magazine shot count Specification Maximum Pellet length 14MM 13.5mm flat head 12mm dome head Magazine height: 49mm Fits the following rifles: Panthera King ***ALL SALES ARE FINAL ON THESE MAGS***

Sold out

EDgun EDgun | EaZy Fill Trigger £113.56

The EDgun EaZy fill system is a revolutionary step forward in PCP (pre-charged Pneumatic) filling. When filling any PCP from a traditional compressed air bottle source, it requires the user to install the fill whip, open the valve, wait for the gun to fill, close the valve and bleed the air out of the fill hose. There hasn't been any advancement with how this process is done - until now. The EaZY fill has a hand throttle that acts like a commonly found compressed air chuck; squeeze the trigger, fill the gun, release the trigger and remove the probe. The filling process no longer wastes air, makes noise when bleeding off the hose, and the process is much faster. Benefits of the EaZy fill system Zero air waste Quicker than traditional valves Adaptable to any PCP fill system Quiet filing No need to access the tank valve Clean Supplied with a 1/8 BSPP (G 1/8) thread that will adapt to all fill probe sizes and foster Foster fitting attachment Hard anodizing coating

EDgun EDgun | Leshiy 2 Air tank | 350CC / 300 bar carbon fiber £227.13

EDgun Leshiy 2 Air tank - 350CC / 300 bar carbon fiber In order to extend your shooting between refills, a bigger bottle is always the first thing you should consider. This 350CC carbon fiber bottle allows you to enjoy longer your sustained shooting with the Leshiy 2. 190mm long and 65mm in diameter, the bottle is not as large as to bother the shooter as well, keeping your whole kit backpack friendly! Perfect design for Leshiy 2. With this 350cc bottle, the Leshiy 2 gains 260cc of additional air volume. Installing the bottle onto the Leshiy 2 Degas gun - locate the bleed screw on the right side of the valve assembly only crack the bleed; there is a detent ball under the grub screw after 100% of the air is drained, tighten the screw - do not over tighten Remove auxiliary air tank arm brace - 4mm hex wrench place fill probe into the fill port - this keeps the fill assembly from spinning Unscrew the auxiliary air tube Unscrew air tube coupling - find the flat spots of the coupling and use a wrench ensure there is an O-ring at the bottom of the male M18 threads (18X2.5 buna 70) Thread on the new bottle hand tight Fill Leshiy 2 -check for leaks

EDgun EDgun | Leshiy 2 Air tank | 460CC / 300 bar MONSTER carbon fiber £299.06

EDgun Leshiy 2 Monster Bottle 460CC Introducing the custom Leshiy 2 Monster Bottle. This custom-made 460CC reservoir is the perfect size for the Leshiy 2, with a large air capacity without sacrificing weight and bulk. EDgun West decided on the 460 bottles, not just for the Leshiy 2, but also because we wanted to make a one-size-fits-all large capacity carbon fiber bottle to meet a rigorous day of shooting. Whether taking the Leshiy 2 out for a hunt or if you need a few extra shots to clear your PRS course, EGW has you covered. Custom Mat Finish Nominal Capacity.48L Working Capacity .46L Working Pressure 300 BAR Length 7.8 Inches Width 2.9 inches

EDgun EDgun | Leshiy 2 | Aluminum Handguard from £136.27

The Aluminum handguard comes in 3 sizes and has a full Picatinny rail on the top and bottom with M-Lok licensed slots on the side. 6 inch (150MM) compatible with the 250 barrel and 350 barrel in some configurations 10 inch (250 MM) compatible with 350 and 450 mm barrel in some configurations 15 inch (400 MM) compatible with 450 and 650 mm barrel in some configurations Included with handguard Mounting plate Longer Locking pin Screws

EDgun EDgun | Leshiy 2 | Magazine from £83.28

Leshiy 2 Magazine Leshiy 2 OEM magazine 8 round comes with a retention magnet Slug version aluminum (.35 Cal is Titanium) PTFE coated for smooth operation magazine holder sold separately

EDgun EDgun | Leshiy 2 | Speed Loader £147.63

The EDgun Leshiy 2 Speed Loader is a step forward in the evolution of speed loaders; unlike previous homemade versions, this model is CNC machined aluminum and hard anodized. The unit is then finished in PFTE, ensuring smooth operation while loading and locking the individual sections. With other 3D-printed models, the speedloaders required the user to remember what bay (cylinder) is loaded. It was common to double load a port while dropping the projectiles in the hole. On the EDgun Speed Loader, the pellets are held at the top for easy visualization. Once all eight ports are filled, a lever drops all the bullets at once. This unique process adds ease and speed to preloading the Speed Loader. Hard-Anodized PFTE Finish All Aluminum Construction Unique Loading Feature Built-in Magnet 6 Magazine Capacity Caliber Marking EDgun Quality

EDGun | M14x1.25 To 1/2 x 20 Barrel Adapter A98

DonnyFL EDGun | M14x1.25 To 1/2 x 20 Barrel Adapter A98 from £17.41

Adapters are threaded for attaching a moderator Thread: M14x1.25 to 1/2 x 20 UNF This adapter is about 22mm OD x 38.30mm Length. It converts barrel threads from M14x1.25 to 1/2 x 20. Works on EDgun Leshiy 2 (use with aluminum handguard to mount on bigger moderators) Silver Does not come with a thread protector. Features: 6061 T6 Aluminum Silver (no anodize)

Sold out

EDgun EDgun | REPR Adjustment Tool £18.92

REPR Adjustment Tool Pocket tool for the Revolving External Pressure Regulator (REPR). This tool produced by EDgun LTD Russia is a must have for adjusting and servicing the new Leshiy transverse regulator. Adds slight mechanical advantage, also can be used to remove the regulator cup if needed

AEA Precision Airguns Element MAX Rear Tank Assembly £143.09

Rear tank upgrade for the AEA Element MAX -300cc capacity Includes the adapter, tank and clamp assembly *AEA no longer includes the rubber buttpad*

Find anything you need

Fast Shipping

Quality Control

Mounting & Sighting