FX Airguns
FX Magazines | FX Impact | Side-Shot Magazine- Gen 4
$74.99
FX Impact Side-Shot Magazine – Gen 4
The FX Impact Side-Shot Magazine Gen 4 is meant specifically for the new FX Impact M4 Airgun. It is made of sturdy plastic and is easy to load thanks to the plastic face-plate lifting off.
SHOT COUNT
.177 – 34 rounds.22 – 28 rounds.25 – 25 rounds.30 – 20 rounds.35 – 18 rounds
FX Airguns
FX Impact M4 | Sniper
$2,445.99
NEW WITH THE FX IMPACT M4 SNIPER
The FX Impact M4 Sniper comes in either black or copper and is available in .177, .22, .25, and .30 calibers.
It has a barrel length of 700mm and an overall length of 1000mm (or 39″.) The high-capacity magazines on the FX Impact M4 have been redesigned and are now made from a stronger material with a new internal mechanism, ensuring that the inner drum rotates smoothly even when fully loaded with some of the heaviest slugs on the market.
The single regulator design is standard on the M4 and features FX’s new brass piston regulator. It is stronger, has faster refresh rates, is more consistent, and can easily handle higher bottle pressures with a max working pressure of 170bar.
When it comes to design, the Impact M4 has been given a new design without straying too far from the original iconic look. This has been accomplished through several small, yet important improvements throughout the entire platform: subtle new lines, cutouts for easy access to certain parts, and angles to tie it all together and make the M4 both more practical and pleasing to the eye.
To further enhance both performance and the shooting experience of the FX Impact M4, you can expect improvement on the overall rigidity thanks to the design of a new top plate. It is significantly thicker and stronger, bringing more rigidity throughout the entire platform. The M4’s redesigned picatinny optics rail mounts to an 11mm dovetail rail machined into the factory backbone. This eliminates alignment issues when removing and reinstalling the optics rail. The Picatinny optics rail can also be loosened so it can slide along the 11mm dovetail rail and be re-clamped closer to the shooter, allowing the shooter to fine-tune eye relief for their chosen optic.
The new quick set trigger system was one of the first major upgrades added to the M4. At the foundation of each great shot taken is the trigger. The quick set trigger on the M4 allows for extensive adjustability based on the shooting scenario: adjust from just the right amount of pull for a hunting application to a match grade trigger that is light, clean, and crisp!
With the new quick set trigger unit and top rail added, FX also improved the overall feel and comfort of shooting the Impact with the new FX grip. The design of the new grip is more defined and comfortable to grip onto, with just the right amount of palm swell and beaver tail to enhance comfort while shooting and giving you a firm hold on your Impact M4.
The FX Impact M4 is available in a variety of calibers, sizes, and colors:
COLORSBlackCopper
CALIBERS / MAGAZINE CAPACITY.177 / 34 shots.22 / 28 shots.25 / 25 shots.30 / 23 shots
OTHER LENGTHS AVAILABLEBarrel Length / Overall LengthCompact: 500mm / 640 (Black or Copper)Sniper: 700mm / 1000mm (Black or Copper)Extended: 800mm / 1120mm (Black or Copper)
FX Airguns
FX Impact M4 | Standard
$2,395.99
NEW WITH THE FX IMPACT M4 STANDARD
The FX Impact M4 Standard comes in either black or copper and is available in .177, .22, .25, and .30 calibers. It has a barrel length of 600mm and an overall length of 860mm (or 34″). The high-capacity magazines on the FX Impact M4 have been redesigned and are now made from a stronger material with a new internal mechanism, ensuring that the inner drum rotates smoothly even when fully loaded with some of the heaviest slugs on the market.
The single regulator design is standard on the M4 and features FX’s new brass piston regulator. It is stronger, has faster refresh rates, is more consistent, and can easily handle higher bottle pressures with a max working pressure of 170bar.
When it comes to design, the Impact M4 has been given a new design without straying too far from the original iconic look. This has been accomplished through several small, yet important improvements throughout the entire platform: subtle new lines, cutouts for easy access to certain parts, and angles to tie it all together and make the M4 both more practical and pleasing to the eye.
To further enhance both performance and the shooting experience of the FX Impact M4, you can expect improvement on the overall rigidity thanks to the design of a new top plate. It is significantly thicker and stronger, bringing more rigidity throughout the entire platform. The M4’s redesigned picatinny optics rail mounts to an 11mm dovetail rail machined into the factory backbone. This eliminates alignment issues when removing and reinstalling the optics rail. The Picatinny optics rail can also be loosened so it can slide along the 11mm dovetail rail and be re-clamped closer to the shooter, allowing the shooter to fine-tune eye relief for their chosen optic.
The new quick set trigger system was one of the first major upgrades added to the M4. At the foundation of each great shot taken is the trigger. The quick set trigger on the M4 allows for extensive adjustability based on the shooting scenario: adjust from just the right amount of pull for a hunting application to a match grade trigger that is light, clean, and crisp!
With the new quick set trigger unit and top rail added, FX also improved the overall feel and comfort of shooting the Impact with the new FX grip. The design of the new grip is more defined and comfortable to grip onto, with just the right amount of palm swell and beaver tail to enhance comfort while shooting and giving you a firm hold on your Impact M4.
The FX Impact M4 is available in a variety of calibers, sizes, and colors:
COLORSBlackCopper
CALIBERS / MAGAZINE CAPACITY.177 / 34 shots.22 / 28 shots.25 / 25 shots.30 / 23 shots
OTHER LENGTHS AVAILABLEBarrel Length / Overall LengthCompact: 500mm / 640 (Black or Copper)Sniper: 700mm / 1000mm (Black or Copper)Extended: 800mm / 1120mm (Black or Copper)
Saber Tactical
Saber Tactical | FX Impact RFB Precision Buttstock ST0092
$143.99
$159.99
The Saber Tactical FX Impact Rear Field & Bench Precision Buttstock (ST0092) is a high-performance upgrade engineered for shooters demanding superior stability, ergonomic sight picture control, and durability. Replacing the factory FX Impact buttstock, this precision-machined CNC 6061 T6 aluminum rear-end buttstock upgrade features an integrated bag rider, rubberized shoulder backing, and QD sling adapter, optimizing benchrest, and field shooting applications.
Key Features & Benefits:
Precision Machined for Uncompromising Durability Constructed from 6061 T6 aluminum, the same high-performance structural alloy used across all Saber Tactical FX Impact accessories, ensuring long-lasting strength and reliability.
Enhanced Shooting Stability The integrated bag rider delivers a stable rear stabilizing resting point, significantly improving shot consistency in both benchrest and field shooting scenarios.
Ergonomic Comfort for Extended Shooting Sessions The rubberized shoulder pad enhances shooter comfort by distributing recoil efficiently, reducing fatigue, and ensuring a secure, non-slip contact point for greater control.
Seamless Compatibility Engineered for a perfect drop-in fit on all FX Impact models, maintaining the rifle’s sleek profile while enhancing handling and accuracy.
Effortless Installation A plug-and-play upgrade, requiring no specialized tools, allowing shooters to enhance their rifle’s performance in minutes.
Integrated Quick Disconnect Sling MountBuilt-in QD adapter enables quick and easy sling attachment, improving your experience in the field and reducing fatigue for hunters and field shooters.
Compatible with Pro Universal Bench Monopod (ST0069) & Shooting BagsDesigned to fit perfectly with the Saber Tactical Pro Universal Bench Monopod (ST0069), allowing precise vertical and horizontal adjustments for an ultra-stable rear rest. Alternatively, pair with any shooting bag for a more organic, manual approach—adjust and fine-tune your aim by manipulating the bag through controlled squeezing.
Compatible with FX Impact Cheek Riser (ST0001)Fully supports the Saber Tactical Cheek Riser, adding the ability to fine-tune your sight picture for the highest level of shooting precision.
Compatible with FX Impact Adjustable Buttstock (ST0009)If you already own the original FX Impact Adjustable Buttstock (ST0009) from Saber Tactical, you can simply attach this highly adjustable rear section to achieve full control over your length of pull and buttstock pad angle, ensuring a customized and precise fit for your shooting style.
*THE THUMB SCREW KNOB IS NOT INCLUDED, USE THE ORIGINAL FX LOCKING KNOB THATS ON THE RIFLE*
FX Airguns
FX Impact M4 | Compact
$2,305.99
NEW WITH THE FX IMPACT M4 COMPACT
The FX Impact M4 Compact comes in either black or copper and is available in .177, .22, .25, and .30 calibers. It has a 500mm barrel length and overall length of 640mm (or 25″). The high-capacity magazines on the FX Impact M4 have been redesigned and are now made from a stronger material with a new internal mechanism, ensuring that the inner drum rotates smoothly even when fully loaded with some of the heaviest slugs on the market.
The single regulator design is standard on the M4 and features FX’s new brass piston regulator. It is stronger, has faster refresh rates, is more consistent, and can easily handle higher bottle pressures with a max working pressure of 170bar.
When it comes to design, the Impact M4 has been given a new design without straying too far from the original iconic look. This has been accomplished through several small, yet important improvements throughout the entire platform: subtle new lines, cutouts for easy access to certain parts, and angles to tie it all together and make the M4 both more practical and pleasing to the eye.
To further enhance both performance and the shooting experience of the FX Impact M4, you can expect improvement on the overall rigidity thanks to the design of a new top plate. It is significantly thicker and stronger, bringing more rigidity throughout the entire platform. The M4’s redesigned picatinny optics rail mounts to an 11mm dovetail rail machined into the factory backbone. This eliminates alignment issues when removing and reinstalling the optics rail. The Picatinny optics rail can also be loosened so it can slide along the 11mm dovetail rail and be re-clamped closer to the shooter, allowing the shooter to fine-tune eye relief for their chosen optic.
The new quick set trigger system was one of the first major upgrades added to the M4. At the foundation of each great shot taken is the trigger. The quick set trigger on the M4 allows for extensive adjustability based on the shooting scenario: adjust from just the right amount of pull for a hunting application to a match grade trigger that is light, clean, and crisp!
With the new quick set trigger unit and top rail added, FX also improved the overall feel and comfort of shooting the Impact with the new FX grip. The design of the new grip is more defined and comfortable to grip onto, with just the right amount of palm swell and beaver tail to enhance comfort while shooting and giving you a firm hold on your Impact M4.
The FX Impact M4 is available in a variety of calibers, sizes, and colors:
COLORSBlackCopper
CALIBERS / MAGAZINE CAPACITY.177 / 34 shots.22 / 28 shots.25 / 25 shots.30 / 23 shots
FX Airguns
FX Impact M4 | .35 Caliber
from $2,295.00
The FX Impact M4 .35 Caliber Airgun comes in either black or copper with an 500mm - 800mm barrel length. The high-capacity magazines on the FX Impact M4 have been redesigned and are now made from a stronger material with a new internal mechanism, ensuring that the inner drum rotates smoothly even when fully loaded with some of the heaviest slugs on the market.
The single regulator design is standard on the M4 and features FX’s new brass piston regulator. It is stronger, has faster refresh rates, is more consistent, and can easily handle higher bottle pressures with a max working pressure of 170bar.
When it comes to design, the Impact M4 has been given a new design without straying too far from the original iconic look. This has been accomplished through several small, yet important improvements throughout the entire platform: subtle new lines, cutouts for easy access to certain parts, and angles to tie it all together and make the M4 both more practical and pleasing to the eye.
To further enhance both performance and the shooting experience of the FX Impact M4, you can expect improvement on the overall rigidity thanks to the design of a new top plate. It is significantly thicker and stronger, bringing more rigidity throughout the entire platform. The M4’s redesigned picatinny optics rail mounts to an 11mm dovetail rail machined into the factory backbone. This eliminates alignment issues when removing and reinstalling the optics rail. The Picatinny optics rail can also be loosened so it can slide along the 11mm dovetail rail and be re-clamped closer to the shooter, allowing the shooter to fine-tune eye relief for their chosen optic.
The new quick set trigger system was one of the first major upgrades added to the M4. At the foundation of each great shot taken is the trigger. The quick set trigger on the M4 allows for extensive adjustability based on the shooting scenario: adjust from just the right amount of pull for a hunting application to a match grade trigger that is light, clean, and crisp!
With the new quick set trigger unit and top rail added, FX also improved the overall feel and comfort of shooting the Impact with the new FX grip. The design of the new grip is more defined and comfortable to grip onto, with just the right amount of palm swell and beaver tail to enhance comfort while shooting and giving you a firm hold on your Impact M4.
COLORSBlackCopper
CALIBERS / MAGAZINE CAPACITY.35 / 18 shots
BARREL LENGTH / OVERALL LENGTHExtended: 800mm / 1120mm (44”)
Saber Tactical
FX Impact M4 Quick Disconnect Sling Adapter ST0103
$18.00
$20.00
PRODUCT DESCRIPTION
Easily attach this adapter to the rear of your FX Impact M4 to use with a quick detach (sold separately) or straps (sold separately) for your sling.
Not compatible with previous FX Impacts
Key Features:
Quick and Easy Attachment: Designed for fast and secure attachment to the rear of your FX Impact M4.
High-Quality Construction: Made of 6061 Aluminum for durability and strength.
Sleek Finish: Black anodized finish for a sleek look and additional protection.
Airmarksman
Airmarksman | Impact Adjustable Cheek Rest
$64.99
Upgrade your shooting experience with the Airmarksman Adjustable Cheek Rest!Get perfect alignment every time with a custom cheek weld designed for comfort and precision. Crafted from rugged aluminum and wrapped in a soft-touch rubber finish, it combines strength with all-day comfort. Make your rifle truly fit you—because consistency means accuracy.
⚠️ Note: This product is compatible exclusively with the Airmarksman Backbone Rail.
Airmarksman
Airmarksman | OPS FX Impact System
$299.99
The Airmarksman OPS (Omni Directional System) for the FX Impact is a complete buttstock replacement engineered to elevate adjustability, control, and shooting comfort across every generation of the FX Impact from M4 and older. Designed for shooters who demand precise fit and uncompromising performance, the OPS transforms the rear of your rifle into a fully tunable interface tailored to you.
FEATURING:
MADE IN THE USA
CONSTRUCTED FROM HIGH QUALITY ALUMINUM AND STAINLESS STEEL
COMPLETE REPLACEMENT OF THE FACTORY FX IMPACT BUTTSTOCK
At the heart of the OPS is its omni-directional adjustment capability, allowing the shooter to fine-tune length of pull, cant, and overall positioning to achieve a consistent and repeatable shooting position. Whether you’re shooting prone, off a bench, or in dynamic field conditions, the OPS adapts to your body—not the other way around.
Built from high-quality materials and engineered for rigidity, the OPS maintains the solid feel FX Impact shooters expect while adding a new level of ergonomic refinement. Installation is straightforward, replacing the factory buttstock with no permanent modifications required.
From competition and long-range precision to hunting and field use, the Airmarksman OPS FX Impact System delivers the adjustability, comfort, and confidence needed to get the most out of one of the world’s most capable air rifles.