Saber Tactical
Panthera Rail - ST0057
$325.00
Panthera Rail - ST0057
PRODUCT DESCRIPTION
Our Saber Tactical Panthera rail has already proven itself in competition helping our shooters bring home the gold in PRS competitions. It adds the rigidity and weight needed to shoot accurately in different positions.
Features:
The main body is made of lightweight T6 aluminum.
Removable brass inserts for added weight
Mlok slots on the side allow shooters to add more weight to their setup
Allows you to use a 300cc bottle when the middle brass weight is removed. Will require Panthera front bottle adapter ST0056.
Jimping pattern underneath the rail to help grip shooting bags
Wider than the factory rail
Length = 17.71 in, Width = 1.96 in
Weight = 4 pounds
Add an extra pound of weight with our brass bridge ST0059
Saber Tactical
Panthera Brass Bridge - ST0059
$125.00
PRODUCT DESCRIPTION
Add an additional pound of weight with our brass bridge. Only compatible with our Saber Panthera rail since ours is wider than factory rail.
Features:
MLok slots on top allowing you to attach different accessories.
Weight: 1 lb
Saber Tactical
FX IMPACT TRS RAIL
from $239.99
Saber Tactical Top Tail Support (TRS)This new rail changes an already great looking tactical gun into a jaw dropping beast! More importantly, it opens up the possibilities with the latest airgun trends. From the new top rail mounted bipod by GRS to inline night optics, and everything in between.
Features:
- Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level.
-M-Lok slots allowing you to attach varied accessories such as; Flashlight, laser and weights.
-Build in 20 MOA giving your scope more elevation for long range shooting
-A Delrin shroud clamp to prevent shroud drooping. Minimizes or eliminates any point of impact changes
-Available in standard (FX Impact Standard / Sniper) and compact (FX Impact Compact) sizes with black anodize.
Saber Tactical
FX MAVERICK TRS RAIL
from $239.99
Saber Tactical Top Tail Support (TRS)
Features:
Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting.
M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights.
Built in 20 MOA, giving your scope more elevation for long range shooting.
Has a Delrin shroud clamp to prevent shroud droop. It minimizes or eliminates any point of impact changes when switching suppressors.
Weight = .8 lb
Note* Highly recommend pairing with the Maverick Cheek riser ST0046
Saber Tactical
FX IMPACT LOW PROFILE FULL ARCA SWISS RAIL
from $154.99
For those that do not need picatinny slots at the end of their rail, this one has full arca. Ideal for the 580cc and 700cc bottles.
Features:
MLok slots at the bottom and on both sides of the rail for add-on accessories.
Low profile, hugs closer to the bottle
Sling QD slots on both sides
6061 T6 Alluminum
Black anodize
From start of trigger guard until the end of rail is 15.75 inches x 2.75 inches wide
Includes an extended dust fill cap
Saber Tactical
FX IMPACT ARCA RAIL 2 ST0022
$159.99
Similar to the first Arca Rail, however this one has T slots on the both sides allowing you to attach shooting accessories such as flashlight and laser. Edges are very smooth and makes it very comfortable to shoot offhand.
Features:
Aluminum 6061 T6
Hard black anodize
Arca Swiss Rail underneath with Picatinny at the end
Also has 1/4 x 20 threads for common camera tripod attachment
Includes an extended dust fill cap
Saber Tactical
Saber Tactical | 52MM BOTTLE CLAMP ST0030 | AEA AIRGUNS
$59.99
Finally a PROPER Clamp is available for the AEA line of airguns. The Saber Tactical 52 mm bottle clamp Has rubber pads on the inside to prevent any marring to your bottle.
This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.
Features:
6061 T6 aluminum
Matte black anodize
Compatible with:
-AEA HP SS Plus-AEA HP SS MAX-AEA Zeus Gen 2-AEA Challenger PRO-AEA Terminator (.30 Cal version only)-Aea Airguns that utilize the 52mm size air tanks
Saber Tactical
Saber Tactical | 60MM BOTTLE CLAMP ST0004
$69.99
If you're uneasy about drilling into your factory gun stock, this 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. Has rubber pads on the inside to prevent any marring to your bottle.
This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.
Features:
6061 T6 aluminum
Matte black anodize
Compatible with:
FX Carbon Fiber & Steel BottlesRAW (HM1000X, etc)Daystate (Redwolf, Airwolf, etc)Brocock (Commander, Bantam, etc)AEA HP Carbines (With Carbon Fiber Tanks)
Saber Tactical
FX IMPACT | MAVERICK | BAG RIDER ST0002
$64.99
With this bag rider, you can easily adjust the height of your gun simply by sliding a shooting bag forward or back. It's that simple to use and also simple to install. This item has proven its effectiveness in competition. Comes with a bag rider adapter for the FX grips.
Saber Tactical
Saber Tactical Tank Valve (ST0031)
$199.99
Saber Tactical Tank Valve (ST0031)
Saber Tactical presents its long awaited tank valve with big over sized knobs for easy filling and a carry handle for the easy transport!
Features:
-7/8-14 Threads-2.7 Inch Gauge-2.25 Inch Valve Knob-1.12 Inch Air release knob-Carry Handle-Quick Disconnect dead head to test tank pressure
Saber Tactical
FX IMPACT | MAVERICK | ADJUSTABLE BUTTSTOCK ST0009
$249.99
The engineers at Saber Tactical definitely listened to the end users & incorporated everything into this design. What we found out was that one design may be great for a certain style of shooting but not others. Without you buying multiple buttstocks, we made this one for bench shooters & also hunters. One of our priorities was to make it easy to attach to the gun & make adjustments without tools. You'll be amazed how easy it is to adjust the buttstock up and down, forward and back, as well as the angle of the shoulder rest. The silicone padding makes it one of the the most comfortable buttstocks on the market. A mono-pod attachment is in the works and will be optional attachment in the near future.
Saber Tactical
UNIVERSAL PICATINNY TO PICATINNY RAIL ST0032
$79.99
UNIVERSAL PICATINNY TO PICATINNY RAIL
-2 Inch Arca
-4.5 Inch of picatinny
-1/4-20 Threaded hole for camera tripod adapter
Saber Tactical
Saber Tactical Bottle Bag ST0036
$199.99
Saber Tactical Bottle Bag
-Holds a 9L/99 cu ft Bottle
-High Quality
-Velcro Ready
-Extra side pockets
Saber Tactical
FX IMPACT | Cheek Riser ST0001
$64.99
Easy to install cheek riser for the FX Impact. Reuses the factory cheek rest.
Features
6061 Aluminum
Matte Anodized
Stainless Steel screws
Saber Tactical
MONO-POD BENCH VERSION ST0026
$249.99
If your gun already has the Saber Tactical buttstock or you plan to get one, this mono-pod is a great addition to it for bench competition. Very rigid and making horizontal/vertical adjustments is butter smooth!
Features:
Stainless Steel Precision lead screw allowing for smooth micro adjustments
Other metals are aluminum 6061 T6
Rubber bottom for extra grip
No need to loosen knobs before making adjustments
Includes adapter to attach to buttstock
Detach and attach mono-pod to adapter by sliding the mono-pod in.
Strong magnets help keep it secure
Ball joint near the base allowing you to cant