Do you need to extend the picatinny rail further on the Impact? Then this is the perfect add-on. Very sturdy and hardly any flex, also comes with an extended dust cap for your convenience.

This compact arca swiss rail is great for the FX Impact with the short 300cc bottle. Makes the gun very comfortable to shoot off hand and allows you to attach your favorite shooting accessories such as a flashlight or laser pointer. Features: Aluminum 6061 T6 Hard black anodized Arca swiss rail with picatinny at the end 1/4 x 20 threads for common photography tripod adapter

Easily clamp this Arca Swiss rail to an existing picatinny rail to extend the bipod rail. T slots on both sides allowing you to attach T slot/M Lok accessories. Features: 6061 T6 aluminum black anodize 4mm hex key required to loosen and tighten clamp 1/4 - 20 threads to connect common camera tripod adapters 2.25 inches wide x 7 inches long 7.7 oz

If your gun already has the Saber Tactical buttstock or you plan to get one, this mono-pod is a great addition for field use. Even if the the shooting surface is not perfectly fat, the ball joint easily adjust to it. Features: Stainless Steel  Precision lead screw allowing for smooth micro adjustments Other metals are aluminum 6061 T6 Rubber bottom for extra grip No need to loosen knobs before making adjustments Includes adapter to attach to buttstock Detach and attach mono-pod to adapter by sliding the mono-pod in.  Strong magnets help keep it secure Ball joint near the base allowing you to cant 

Features: Cheek riser is made of delrin with Aluminum mounting plate Allows a little over 18mm of vertical adjustment. Ambidextrous for left and right hand shooters Weight = 3.6oz Note* Highly recommend pairing with the standard/compact FX Maverick TRS rail

For competitive shooters who do not like to wrap your thumb around the grip, this grip has a thumb rest that can be positioned on either side. You can also adjust the angle to your preference. Note* The first shipment of grips are compatible with FX Impacts and most AR style grips. We've found that the FX Maverick has a thicker adapter and will not be compatible. We mark the first batch with a Yellow round sticker on the package. Features: 6061 T6 aluminum Black anodized Skeletonize to reduce weight Ambidextrous thumb rest Weighs 6.0 oz

This magnetic arm lock help keep the cocking arm open. Useful during competition when you are required to keep the bolt open. Features: 6061 T6 Aluminum Black anodized Stainless steel screw Easy install Weigh only 1oz Installation instruction: Highly recommend you remove the bottle Fire the gun to remove any air in the plenum Unscrew bolt in front of plenum. See picture 1 Install Magnetic Arm Lock

This bushing goes inside the TRS clamp allowing you to better stabilize the FX carbon fiber sleeve. This does not include the clamp. Features: Made of black delrin.Recommended with 800mm Carbon Fiber tension kits

Easily attach this to the rear of your FX Impact M3 to use with a quick detach or straps for your sling. DOES NOT WORK ON THE M4.  Features:  Made of hardened steel Black anodize

The Saber Tactical Fx Panthera Front Bottle Adapter is designed for convenience. It allows you to attach a second bottle of compressed air to the front of your rifle, providing a really nice alternate placement option for your bottles. The adapter is constructed with stainless steel for durability and attaches easily to the front of your rifle, allowing both bottles to work in tandem for extended shooting sessions. Upgrade your shooting experience with the Saber Tactical Fx Panthera Front Bottle Adapter.

This extended dust cap makes it easier to get into those tight trigger guards. With this dust cap, you can easily remove without straining your finger muscles! Features: Made of aluminum 60601 with a strong magnet inside Measures: 14mm outer diameter and just shy of 23mm long

Product description If you're uneasy about drilling into your factory gun stock, this 34mm tube clamp will easily attach to your 34mm air reservoir. It has rubber pads on the inside to prevent any marring to your bottle. This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories. Features: 6061 T6 aluminum Matte black anodize  Compatible with: FX Wildcat FX Dreamlime "Tube" FX Streamline Taipan Veteran Benjamin Marauder

The Saber Tactical FX Impact Fishing Conversion Kit is a must-have accessory for serious air rifle enthusiasts. Designed specifically for the Fx Impact PCP air rifle, this conversion kit allows you to transform your air rifle into a powerful fishing tool. With its ease of use and versatility, the FX Impact Fishing Conversion Kit is the perfect accessory for anyone who loves air rifles and fishing. Be sure to check out the Saber Tactical FX Impact Fishing Conversion Kit today!

Saber Tactical Vertical Grip: Rubberized Overmolded Edition Engineered for Precision. Built for Every Precision Shooter. The Saber Tactical Vertical Grip has always been the gold standard for serious airgunners and precision rifle shooters. Now we've reimagined it, delivering the same championship-proven ergonomics at a price point and new features that put elite performance within reach of everyone, from the competitive Benchrest and PRS/NRL22 shooter to the backyard airgunner who refuses to compromise on quality. The Case for Going Vertical In disciplines like Benchrest and PRS/NRL22, where shot-to-shot consistency is the entire game, a vertical grip delivers the stable, repeatable hand position that serious competitors rely on. The additional point of contact locks your hold, ensures proper hand and trigger finger positioning, and builds a platform that performs the same on shot one as it does on shot fifty.  In Benchrest, scoring targets are measured in fractions of an inch. In PRS/NRL22, you're transitioning between targets and positions under time pressure. Either way, that consistency doesn't just help, it's what separates a podium finish from the middle of the pack. And for the recreational airgunner who wants their setup to feel and perform like the pros? That same grip confidence translates directly to more satisfying shooting at any level. What's New: The Rubberized and Textured Overmold Design The all-new rubberized overmold construction wraps our proven grip geometry in a tactile, high-grip rubber compound built for real-world conditions. The deeply textured surface keeps your hand planted through sweaty summer matches and cold early-morning competitions alike, no slipping, no shifting, no second-guessing. PRS/NRL22 shooters will appreciate how confidently it seats through every positional transition, while Benchrest competitors will notice how the softer and stickier material interface quiets movement during the hold. Critically, we didn't change a thing about the ergonomics. The exact same palm swell, radius, and natural wrist angle from the aluminum version is carried over in full, just wrapped in a durable overmold that reduces vibration and hand fatigue across long match days. Built Around the AR Grip Interface Standard If your airgun accepts a standard AR-pattern grip, this is a direct drop-in upgrade. No adapters, no modifications, no guesswork, just mount and shoot. Compatible with dedicated Benchrest rifles, PRS/NRL22 chassis setups, recreational air rifles, rimfire and centerfire precision rifles built around the AR grip standard. Included CNC Aluminum Thumb Shelf Included with every grip is a precisely machined CNC aluminum angle adjustable thumb shelf, an add-on most manufacturers charge extra for or don't offer at all. Every time you mount the rifle, your thumb finds the same reference point, your fingers register in the same position, and your trigger finger meets the blade at the same angle with the same reach. For Benchrest airgunners where tiny variations open groups, and for PRS/NRL22 competitors reacquiring their grip between positional stages, that repeatability isn't a luxury, it's a performance requirement. Rigid, dimensionally consistent CNC aluminum means it stays that way all season long. Feature Summary Rubberized overmold construction, aggressive texture, superior grip retention in all conditions Perfected ergonomics and palm swell born from months of intensive R&D, including clay modeling, multiple prototype iterations, and feedback from a wide community of pro shooters to dial in the exact palm swell, hand position, and wrist angle, now carried over exactly into the rubberized version so you get the benefit of that work from the moment you mount it AR grip interface compatible, fits all AR grip-compatible precision air rifles, no adapters required Includes CNC aluminum angle adjustable thumb shelf, consistent hand placement, trigger reach, and repeatable trigger breaks Reduces vibration and fatigue across long match days and extended range sessions Significantly more affordable than the aluminum version, pro-level feel at a price that works for every airgunner Who It's For The Benchrest competitor chasing the tightest possible groups. The PRS/NRL22 airgunner who needs consistent performance from position to position. The backyard airgunner who wants that pro-level feel Saber Tactical is known for. Whatever your discipline, this grip gives you the foundation to shoot your best. Upgrade your hold. Elevate your shot. The Saber Tactical Vertical Grip, now in rubberized over mold.

Note: Does not include rear buttstock. if you have the wooden version, you'll need to source one. The Saber Tactical Raw HM1000 chassis is the perfect upgrade for your air rifle. Made from high-quality 6061 aluminum, this chassis is both lightweight and durable, giving you the perfect balance of strength and maneuverability. The MLOK slots on the side and bottom of the rail allow you to attach your favorite accessories, making customization easy and effective. Whether you're looking to add a flashlight, bipod, or anything in between, the MLOK slots give you the versatility to get the job done right. Starting from the trigger guard, you'll have about 15.25 inches of arca rail below allowing you to position a bipod further out. Additionally, the 1/4-20 threads on the bottom of the chassis allow for easy attachment to a camera tripod adapter. Finally, the quick disconnect holes located on both sides of the chassis make it easy to attach a sling, adding an additional layer of comfort and convenience to your shooting experience. Overall, the Saber Tactical Raw HM1000 chassis is the perfect upgrade for anyone looking to take their air rifle performance to the next level. So why wait? Order yours today and get ready to take on the competition with confidence and style!