Adapters
EDgun Leshiy 2 | 350MM | LONG | (REPR) $2,470.00
Leshiy 2 Recommend Slugs .22 Cal NSA (Click Here)-20.2 Gr | .219-24.8 Gr | .219 .25 Cal NSA (Click Here)-33.6 Gr | .254-38.5 Gr | .254.30 Cal NSA (Click Here) -47.2 Gr | .303-61.5 Gr | .303 The EDgun Leshiy 2 R.E.P.R. is a step forward in modern PCP design.  The Leshiy 2 is hammerless and uses a new valve that allows consistent dwell time regardless of regulator pressure.  This system allows for rapid opening and closing, and the user no longer has to worry about wear and tear with higher regulator pressure requiring a heavy hammer strike on the valve stem.  Offered in a long (350mm barrel) or a short (250mm barrel), the Leshiy 2 is modular, multi-caliber, and accommodates the user looking for an EDC backpack model, a 450 mid-range short barrel rifle, to a  600mm barrel long range airgun The REPR is a transverse or perpendicular micro regulator that is only a few MM tall.  It uses a cup that is screwed into the plenum sideways.  A mini Belleville washer stack is used along with a single-piston O-ring.  Placed between the air reservoir and plenum is a debris plug that prevents contaminants from entering the regulator.  The REPR is capable of regulating the plenum pressure between 60-280 BAR.  The black disc is used to either increase or decrease pressure in the plenum.  With the REPR,  increase and decrease of the regulator pressure can be done while the gun is fully charged, no need to degas the Leshiy to adjust the regulator.Additionally, the REPR is equipped with a removable plug with 1/8 BSPP threads; this is used to check the plenum's pressure if desired.    The key to this system is not the volume of the plenum nor the fact that the pressure can go so high - but the combination of the patented valve and high-pressure regulator.  No need to waste money on "power plenums" or other snake oil items.,  Leave those upgrades for traditional valve systems.  The new REPR comes complete with everything you need, straight from EDgun.  Ed has a tradition of selling guns that don't need aftermarket gizmos to ensure performance.  The new REPR is ready directly from EDgun without having to pay for extra items Edgun Leshiy Long R.E.P.R.  specs  OAL 29.25 inches OAL Folded 17.5 inches LOP 15 inches to the center of the trigger Trigger grip LOO 3.8 inches air reservoir volume 170 CC hammerless semi-automatic  8 round rotary magazine (detachable) weight 5.25 pounds Trigger - single-stage nonadjustable  1 pound pull Picatinny top rail -20 MOA Picatinny bottom rail - 5 slot  Barrel length 350 MM (13.75 inches) Regulator capacity (adjustable) 60-280 BAR Included with the gun 2 magazines included (8 round) OEM Silencer 2 magazine holders fill probe spare transfer ports 1 spare magazine magnet Shot count / Speed / Working Pressure 177 Caliber  945 FPS 10.34 grain 36 shots per fill 90-300 bar .22  Caliber 915 FPS (18.1 grain) 28 Shots per fill  120-300 BAR .25 Caliber  850FPS (25.39 grain)  22 shots per fill 130-300 bar .30 caliber 805 FPS (44.75 grain) 18 shots per fill 130-300 bar
EDgun Leshiy 2 | 250MM | SHORT | (REPR) $2,295.00
Leshiy 2 Recommend Slugs .22 Cal NSA (Click Here)-20.2 Gr | .219 -24.8 Gr | .219 .25 Cal NSA (Click Here)-33.6 Gr | .254 -38.5 Gr | .254.30 Cal NSA (Click Here) -47.2 Gr | .303-61.5 Gr | .303 The EDgun Leshiy 2 R.E.P.R is a step forward in modern PCP design.  The Leshiy 2 is hammerless and uses a new valve that allows consistent dwell time regardless of regulator pressure.  This system allows for rapid opening and closing, and the user no longer has to worry about wear and tear with higher regulator pressure requiring a heavy hammer strike on the valve stem.  Offered in a long (350mm barrel) or a short (250mm barrel), the Leshiy 2 is modular, multi-caliber, and accommodates the user looking for an EDC backpack model, a 450 mid-range short barrel rifle, to a  600mm barrel long range airgun The REPR is a transverse or perpendicular micro regulator that is only a few MM tall.  It uses a cup that is screwed into the plenum sideways.  A mini Belleville washer stack is used along with a single-piston O-ring.  Placed between the air reservoir and plenum is a debris plug that prevents contaminants from entering the regulator.  The REPR is capable of regulating the plenum pressure between 60-280 BAR.  The black disc is used to either increase or decrease pressure in the plenum.  With the REPR,  increase and decrease of the regulator pressure can be done while the gun is fully charged, no need to degas the Leshiy to adjust the regulator.Additionally, the REPR is equipped with a removable plug with 1/8 BSPP threads; this is used to check the plenum's pressure if desired.    The key to this system is not the volume of the plenum nor the fact that the pressure can go so high - but the combination of the patented valve and high-pressure regulator.  No need to waste money on "power plenums" or other snake oil items.,  Leave those upgrades for traditional valve systems.  The new REPR comes complete with everything you need, straight from EDgun.  Ed has a tradition of selling guns that don't need aftermarket gizmos to ensure performance.  The new REPR is ready directly from EDgun without having to pay for extra items. Edgun Leshiy short R.E.P.R. specs  OAL 25.5 inches OAL Folded 13.5 inches LOP 15 inches to the center of the trigger Trigger grip LOO 3.8 inches air reservoir volume 170 CC hammerless semi-automatic  8 round rotary magazine (detachable) weight 5 pounds  barrel length 250MM (9.8 inches) Trigger - single-stage nonadjustable  1 pound pull Picatinny top rail -20 MOA Picatinny bottom rail - 5 slot   Regulator capacity (adjustable) 60-280 BAR Included with the gun 2 magazines included (8 round) OEM Silencer 2 magazine holders fill probe spare transfer ports 1 spare magazine magnet Shot count / Speed / Working Pressure 177 Caliber  900 FPS 10.34 grain 36 shots per fill 90-300 bar .22  Caliber 870 FPS (18.1 grain) 28 Shots per fill 120-300 BAR .25 Caliber 800 FPS (25.39 grain)  22 shots per fill 130-300 bar .30 caliber 740 FPS (44.75 grain) 18 shots per fill 130-300 bar
ERGO Air ERGO AIR | TACTICAL DELUXE FLAT TOP | SUREGRIP $39.99
Features hand filling palm swells for both left and right handed shooters. The gripping surface consists of soft, textured SUREGRIP for a comfortable & secure grip in any condition. Does Not include a plug - A Tactical Deluxe plug can be purchased here
Sold out
EDgun EDgun | REPR Adjustment Tool $24.99
REPR Adjustment Tool Pocket tool for the Revolving External Pressure Regulator (REPR).  This tool produced by EDgun LTD Russia is a must have for adjusting and servicing the new Leshiy transverse regulator.  Adds slight mechanical advantage, also can be used to remove the regulator cup if needed 
DonnyFL EDGun | M14x1.25 To 1/2 x 20 Barrel Adapter A98 from $23.00
Adapters are threaded for attaching a moderator Thread: M14x1.25 to 1/2 x 20 UNF This adapter is about 22mm OD x 38.30mm Length. It converts barrel threads from M14x1.25 to 1/2 x 20.  Works on EDgun Leshiy 2 (use with aluminum handguard to mount on bigger moderators) Silver Does not come with a thread protector.  Features: 6061 T6 Aluminum Silver (no anodize)
EDgun EDgun | Leshiy 2 | Speed Loader $194.99
The EDgun Leshiy 2 Speed Loader is a step forward in the evolution of speed loaders; unlike previous homemade versions, this model is CNC machined aluminum and hard anodized. The unit is then finished in PFTE, ensuring smooth operation while loading and locking the individual sections. With other 3D-printed models, the speedloaders required the user to remember what bay (cylinder) is loaded. It was common to double load a port while dropping the projectiles in the hole. On the EDgun Speed Loader, the pellets are held at the top for easy visualization. Once all eight ports are filled, a lever drops all the bullets at once. This unique process adds ease and speed to preloading the Speed Loader. Hard-Anodized PFTE Finish All Aluminum Construction Unique Loading Feature Built-in Magnet 6 Magazine Capacity  Caliber Marking EDgun Quality 
EDgun EDgun | Leshiy 2 | Magazine $89.99
Leshiy 2 Magazine Leshiy 2 OEM magazine  8 round comes with a retention magnet aluminum  PTFE coated for smooth operation magazine holder sold separately 
EDgun EDgun | Leshiy 2 | Aluminum Handguard from $179.99
The Aluminum handguard comes in 3 sizes and has a full Picatinny rail on the top and bottom with M-Lok licensed slots on the side.     6 inch (150MM) compatible with the 250 barrel and 350 barrel in some configurations  10 inch (250 MM) compatible with 350 and 450 mm barrel in some configurations  15 inch (400 MM)  compatible with 450 and 650 mm barrel in some configurations Included with handguard  Mounting plate Longer Locking pin Screws  
Sold out
EDgun EDgun | Leshiy 2 Air tank | 350CC / 300 bar carbon fiber $299.99
EDgun Leshiy 2 Air tank - 350CC / 300 bar carbon fiber In order to extend your shooting between refills, a bigger bottle is always the first thing you should consider. This 350CC carbon fiber bottle allows you to enjoy longer your sustained shooting with the Leshiy 2. 190mm long and 65mm in diameter, the bottle is not as large as to bother the shooter as well, keeping your whole kit backpack friendly! Perfect design for Leshiy 2. With this 350cc bottle, the Leshiy 2 gains 260cc of additional air volume.     Installing the bottle onto the Leshiy 2 Degas gun - locate the bleed screw on the right side of the valve assembly  only crack the bleed; there is a detent ball under the grub screw after 100% of the air is drained, tighten the screw - do not over tighten  Remove auxiliary air tank arm brace - 4mm hex wrench place fill probe into the fill port - this keeps the fill assembly from spinning  Unscrew the auxiliary air tube Unscrew air tube coupling - find the flat spots of the coupling and use a wrench  ensure there is an O-ring at the bottom of the male M18 threads (18X2.5 buna 70) Thread on the new bottle hand tight Fill Leshiy 2 -check for leaks
Sold out
EDgun EDgun | EaZy Fill Trigger $149.99
The EDgun EaZy fill system is a revolutionary step forward in PCP (pre-charged Pneumatic) filling.  When filling any PCP from a traditional compressed air bottle source, it requires the user to install the fill whip, open the valve, wait for the gun to fill, close the valve and bleed the air out of the fill hose.  There hasn't been any advancement with how this process is done - until now.   The EaZY fill has a hand throttle that acts like a commonly found compressed air chuck; squeeze the trigger, fill the gun, release the trigger and remove the probe.  The filling process no longer wastes air, makes noise when bleeding off the hose, and the process is much faster. Benefits of the EaZy fill system Zero air waste Quicker than traditional valves Adaptable to any PCP fill system  Quiet filing  No need to access the tank valve Clean Supplied with a 1/8 BSPP (G 1/8) thread that will adapt to all fill probe sizes and foster Foster fitting attachment Hard anodizing coating

Fast Shipping

Orders are usually fulfilled within 1 business day

Quality Control

Each rifle is tested and fired prior to being shipped

Mounting & Sighting

We offer free mounting/sighting and installation of accessories
American Express Apple Pay Discover Meta Pay Google Pay Mastercard PayPal Venmo Visa