DonnyFL AEA | Challenger Pro Moderator Adapter #A99 $34.99
Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF This adapter converts the factory barrel threads from M14x1 to 1/2 x 20. It is also designed to center the barrel within the shroud. Features: 6061 T6 Aluminum Not anodized Compatible up to .30 caliber
DonnyFL AEA | Challenger Pro Moderator Adapter M14x1 A100 $34.99
Adapters are threaded for attaching a moderator This end cap is for your Ronin or Emperor to screw directly onto the AEA Challenger pro shroud. It has a recess that helps center the barrel inside the shroud. Features: 6061 T6 Aluminum compatible with all Challenger Pro barrels
DonnyFL AEA | Challenger Series | .22/.25/.30 & .357 Moderator Adapters | #A81 & #A83 $39.99
Adapters are threaded for attaching a moderator *DOES NOT WORK WITH THE 32" CHALLENGER STANDARD OR BULLPUP. THE 32" DOES NOT HAVE A SHROUD AND A 1/2x20 UNF MODERATOR CAN BE SCREWED DIRECTLY ON WITHOUT A ADAPTER* Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Comes with knurled thread protector For .30 caliber measure the OD of the threaded part of the front cap. It should be close to 28mm. May need to heat up the front cap with a heat gun or mini torch to loosen the thread locker.
DonnyFL AEA | HP SS Max .357 Cal | Challenger "BIG BORE" .357/.45/.50 Cal #A91 Moderator Adapters $39.99
This adapter is compatible with the .35/.45/50 Cal AEA Challenger "BIG BORE" (side lever model only) as well as the .357 AEA HP SS Max. #A91 Features: M18x1 male threads 6061 T6 Aluminum Anodized Knurled thread protector
DonnyFL Air Arms S510 | 1/2 x 20 Double Male Adapter A21 $39.99
Features: Any gun that needs a double sided male adapter One side has knurled cap Has through hole in the threads for easy tightening or loosening CNC Matte Black Anodize .79 inches / 20 mm OD Great for Air Arms rifles with female 1/2x20 UNF thread at the muzzle *Does not fit the S510/S410 with a factory moderator
DonnyFL Air Venturi Avenger Extender/Umarex Origin 1/2 x 20 Adapter #A70 $44.99
Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNFThis version allows you to use a larger suppressor than the Tanto or KOI without having to remove it to fill the gun. Also redesigned to slide over the barrel to keep the barrel centered with the adapter. This reduces the chance of pellet clipping and improves accuracy. Features: Compatible with .177 caliber to .25 6061 Aluminum T6 Black anodized 1/2 x 20 male threads *Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping.
DonnyFL AirForce | Texan .257 .308 .357 .457 and .50 Moderator Adapter $45.00
Note: Please measure your barrels outer diameter before ordering. Compare with the sizes below. There maybe a change in their barrel anodizing which is causing the OD to be a little larger. Features: Made of steel M18x1 threads compatible with .357 Ronin or Emperor with M18x1 endcap Comes with black anodized Aluminum thread protector Adapters are tight fit and have two set screws (M4) to help secure to the barrel Very tight fit, may require some sanding inside the adapter Uses 2mm hex keys for set screws I would recommend putting a thin film of blue loctite on the barrel then slide on the adapter. Let it set overnight. The following are the inner diameter for my adapters: .257 = Use Condor adapter here .308/357 = 16mm or .625 inches "A34" .308/.357 = 17mm or .67inches "A95" .457 = .707 to .71 inches Two sizes for .50 (please use a caliper and measure your barrel's outer diameter) .50 = 18.83 mm .50 = 19.1 mm
DonnyFL Benjamin Bulldog .357 Cal Moderator Adapter w/ thread protector #A41 $44.99
Adapters are threaded for attaching a moderator Thread: M18 x 1 The new adapter have finally arrived. This new design goes back to the barrel and slides over the barrel bushing. This will keep the barrel aligned with the adapter's exit hole. Please note that the barrel bushing is not included. The .357 Benjamin Bulldog is becoming popular for big game hunting. Add this adapter and pair it up with a .357 Ronin or .357 Emperor to make it the ultimate hunting airgun. The factory gun already has the barrel bushing. I took mime off to show how it fits into the adapter in the picture. Made by CNC for accuracy Very easy to install. Remove the top and bottom screw securing the front cap and swap it out for this adapter. Screw the two screws back in and you're done. No need to remove the shroud. Matte Black anodize Knurled thread protector When putting this on, press the adapter into the shroud as you tighten the two screws. This will ensure the adapter is flush with the shroud.
DonnyFL Benjamin Marauder (Mrod) | Fortitude | Armada Moderator Adapter #A7 $39.99
Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF Marauders are great entry level PCP guns. Lots of mods you can do to make them more powerful. More power means a louder gun. To make it backyard friendly make sure to grab this 1/2 x 20 UNF Adapter to allow you to screw on an aftermarket LDC. Threaded end that goes into the OEM shroud is 13/16 - 28. *Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip
DonnyFL Benjamin Marauder Pistol (Prod) & Daystate Huntsman Regal Moderator Adapter #A17 $39.99
Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF Want to make your Prod quieter? You'll need this 1/2 x 20 adapter that will screw into the OEM shroud. The threads that screws into the shroud is 11/16 - 24. The .25 Sumo 1/2 x 20 is my favorite suppressor for this gun. The .25 works great with the .22 and reduces the chance of pellet clipping. However, in order to fill this gun with the Sumo, you'll have to remove the suppressor. An alternative is to go with either the Tanto or KOI with cone rear cap. *Highly recommend going with a caliber one size up to reduce the chance of pellet clipping. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip
DonnyFL Benjamin Marauder Pistol (Prod) Extended Adapter #A78 $44.99
Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF This adapter extends the shroud 1.5 inches or about 38.1mm. Pair it up with a .22-25 Tanto 1/2 x 20 Bolt #S69 and this pistol will be very quiet. No need to remove the suppressor to fill the gun. Features: 6061 Aluminum Black anodized Comes with knurled thread protector