Leapers
UTG Bug Buster 3-9x32 Scope & UTG Snap in Adapter
$139.00
$155.00
UTG 3-9X32 1" BugBuster Scope, AO, RGB Mil-dot, QD Rings (SCP-M392AOLWQ)
•
Built on TRUE STRENGTH® Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fogproof and Rainproof
•
1 Inch Tube with Emerald Coated Lens for Crystal Clear View with Maximum Light Transmission
•
Premium Zero Lockable and Zero Resettable Target Turrets with Consistent and Precise 1/4 MOA Per Click Adjustment
•
Range Estimating Mil-dot Reticle for Optimal Aiming and Shooting Performance
•
Adjustable Objective from 3 Yards to Infinity to Achieve Parallax-free View
•
Red/Green Dual Illumination for Versatile Applications and Weather/Light Conditions
•
Large Field of View (Wide Angle) and Most Accommodating Eye Relief for Optimum Critical CQB Mission
•
Complete with 2" Sunshade, High Quality Flip-open Lens Caps and Quick-detachable Rings
UTG .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor (MNT-DT2PW01)
.22/Airgun Dovetail to Picatinny/Weaver Rail Adaptor
•
Innovative Rail Platform to Convert Most .22/Airgun Rails
•
Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base
•
Extremely Low Profile and Lightweight
•
Precision and Repeatable Alignment
•
Easy Installation with Most .22/Airgun Rails, 2PCs/Set
•
Removable Stop Pin for Extra Secure Installation
UTG
UTG Recon 360 TL Bipod | Picatinny
$73.99
$89.99
UTG Recon 360 TL Bipod
Features:
•
3 Position Folding Legs and Lockable Leg Extensions Equipped with Nonslip Rubberized Foot Pads
•
Center Height Adjustable from 5.5"-7" | 7"-9" | 8"-12"
•
Fine-tunable Tension Adjustment Lever Applies the User Desired Amount of Tension to the Bipod's 360° Panning & 15° Forward, Rearward, Left, and Right Tilt
•
Low Profile Offset Picatinny Mount with Knurled Thumb Nut and Reinforced Steel Cross Bolt
•
Durable Aircraft Aluminum Construction Finished in a Matte Black Anodization
Leapers
UTG MAX STRENGTH 1" | 2 PC | PICATINNY Rings
$21.99
ITEM NUMBER : RG2W1154
•
4-screw Medium Profile "Tiger" Ring
•
Machined from Aircraft Aluminum Alloy with Heavy Duty Steel Locking Plate for Maximum Strength Holding Zero
•
Twist Lock Design for Quick and User Friendly Easy Installation
•
Light Weight with See-through Tunnel and Slot Cut on Ring Top
•
High Quality Synthetic Protective Tape on Rings' Inner Surface to Protect Your Equipment
•
Optimized Dimensions for Best Fit on All Picatinny/Weaver Rails
•
Strong Recoil Stop Cross Bolt for Optimized Fit and Zero
ITEM NUMBER : RG2W1204
•
4-screw High Profile "tiger" Ring
•
Machined from Aircraft Aluminum Alloy with Heavy Duty Steel Locking Plate for Maximum Strength Holding Zero
•
Twist Lock Design for Quick and User Friendly Easy Installation
•
Light Weight With See-through Tunnel and Slot Cut on Ring Top
•
High Quality Synthetic Protective Tape on Rings' Inner surface to protect your Equipment
•
Optimized Dimensions for Best Fit on All Picatinny/Weaver Rails
•
Strong Recoil Stop Cross Bolt for Optimized Fit and Zero
Leapers
UTG PRO P.O.I | 2 PCs Medium Profile | PICATINNY Rings
$55.95
$64.99
Proudly Designed and Made in USA
•
Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 30mm Center Height to Fit Optics with a 30mm Tube and up to a 59mm Outer Objective
•
The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interactionb) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Holdc) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
•
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width
•
Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
•
Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
•
UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
UTG
UTG | QD SLING SWIVEL ADAPTOR, PICATINNY 45 DEGREE ANGLED OFFSET
$12.50
Part Number: TL-SWPM01
• UTG Low Profile Picatinny-mount 45 Degree Angled Offset Quick-detach Sling Swivel Adaptor• Precision Machined from Aircraft Grade Aluminum with Hard Anodizing Matte Black Finish• Rugged Mounting Base with Max Strength Torx Drive Locking Screw to Fit on Picatinny Rail,• Extremely Compact, Lightweight, and Super Low Profile• Accepts any Quick Detach Sling Swivel with 0.37” Diameter Swivel Stud• Mount Reversible for Right- or Left-handed Sling Use• QD Swivel Housing Designed with Quarter-turn Rotational Overtravel Stops to Better Control Sling Position and Movement• Includes T20 Torx Allen Wrench for Simple and Friendly Installation, No Gunsmith Required
UTG
UTG PRO | AR15 OPS READY S1 MIL-SPEC STOCK ONLY
$34.50
Part Number: RBUS1BMS
Proudly Designed and Made in USA
Built for Heavy-duty Operations with Tightest Tolerance Control Providing the Most Secure Fit and Silent Operation
Mil-spec Stock Molded from Impact Resistant High-strength Polymer in Black
Built-in Rubberized Butt Pad, Chamfered Front and Rear Edges and Slanted Cheek Rest Surface Further Enhances Shooting Stability and Consistent Firearm Control
Dual Storage Compartments with Removable Waterproof Caps Provide Dry Storage for Batteries (Up to 8 CR123) and/or Other Essential Accessories
Integral Ambidextrous Sling Loop and QD Sling Swivel Housing for Left or Right Handed Shooters
Extended 8" Length for Increased Length of Pull - Combine with our Super Slim Handguards for Superior Firearm Handling
Polymer Stock Only
HEIGHT (IN)
5.5
LENGTH (IN)
8.5
LENGTH (MM)
215.9
WIDTH (IN)
2.3
Leapers
UTG | OP3 | 4-16X44 30MM COMPACT SCOPE
$238.99
UTG OP3 4-16X44 30MM COMPACT SCOPE, AO, IE, GLASS UMOA (OP3-GM4164UMOA)
Built on TRUE STRENGTH® Platform and Completely Sealed and Nitrogen Filled for Reliable Shockproof and Zero Holding Performance
30mm Tube with Best in Class Emerald Lens Coatings to Achieve Maximum Light Transmission for Best Clarity
IPX7 Waterproof Rated
Premium Low Top Zero Lockable and Resettable Target Turrets with Precise 1/4 MOA per Click Adjustment
UMOA Range Estimating Etched Glass Reticle
Innovative EZ-TAP® Illumination Enhancing (IE®) System with Red/Green Dual-Color and 36 Multi-Color Mode to Accommodate All Weather/Light Conditions (US Pat. 8437079; EU Pat. EP2520894)
1-Click Illumination Memory Feature Gets the User Right Back to the Color/Brightness Setting Last Used
Low Top Side Wheel Adjustable Turret (SWAT) for Parallax Adjustment from 10 Yards to Infinity
Fine Tune Adjustable/Lockable Eyepiece Diopter
Complete with Flip-open Lens Caps, 3" Removable Threaded Sunshade, Cleaning Cloth, and Medium Profile Max Strength Twist Lock Picatinny/Weaver Rings
ACCESSORIES INCLUDED
MaxStrength Picatinny/Weaver Rings, 1 Pair
3 Inch Sunshade
Flip-open Lens Caps
CR2032 3V High Energy Lithium Battery
Hex Screw
Allen Wrench 3mm
Allen Wrench 1.5mm
Cleaning Cloth
User Manual
UTG
UTG | SINGLE POINT BUNGEE SLING WITH QD SLING SWIVEL
$27.95
Part Number: PVC-GB507B
• Heavy Duty 1.5" Quick Adjustable Polyester Webbing and Elastic Construction• Steel Push Button Quick Detach Sling Swivel Attachment for Quick Installation and Removal• Durable Bungee System Reduces Fatigue by Relieving the Felt Weight of the Firearm Away from the User's Shoulder• Inner Length Adjustable from 42" to 58" to Accommodate Various Body Types and Gear
Leapers
UTG PRO P.O.I | 2 PCs High Profile | PICATINNY Rings
$55.95
$64.99
ITEM NUMBER : RDU013022
•
Proudly Designed and Made in USA
•
High Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 37mm Center Height to Fit 30mm Tube Optics with up to a 73mm Outer Objective Diameter
•
The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tubeb) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Holdc) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•
Original Snag-free Contoured Profile with Reduced Weight and Size
•
6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
UTG
UTG PRO | AR15 6-POSITION RECEIVER EXTENSION TUBE | MIL-SPEC
$17.99
Part Number: TLU001
• 6-position Mil-spec Diameter Receiver Extension Tube for AR15 Rifles• Extension Tube CNC Machined from 6061-T6 Aircraft Grade Aluminum with Precisely Rolled Threads for Durable Thread Engagement with Lower Receiver• Underwent the Tightest Tolerance Controls for a Secure Fit and Function with Various Collapsible Stocks• Finished in a Matte Black Type III Class II Hard Coat Anodize• Proudly Designed and Made in USA
HEIGHT (IN)
1.5
HEIGHT (MM)
36.8
LENGTH (IN)
7.3
LENGTH (MM)
184.2
WIDTH (IN)
1.1
WIDTH (MM)
27.94
Leapers
UTG PRO P.O.I | 2 PCs High Profile | DOVETAIL Rings
$55.95
$64.99
Proudly Designed and Made in USA
•
High Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 37mm Center Height to Fit 30mm Tube Optics with up to a 73mm Outer Objective Diameter
•
The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tubeb) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Holdc) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil
•
Original Snag-free Contoured Profile with Reduced Weight and Size
•
6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
•
2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
Leapers
UTG ACCU-SYNC QR | 2 PCs High Profile | PICATINNY Rings
$74.99
$84.99
ITEM NUMBER: AQR322 (30mm) | AQR420 (34mm)
•
Precision CNC Machined from 6061-T6 Aluminum and Finished in a Matte Black Anodization
•
Lightening Cuts Reduce Overall Weight Without Compromising Durability
•
All Sharp Edges and Corners Removed and Radiused
•
Quick Release (QR) Mount Features Tool-free Tension Adjustment, Locking Quick Release Lever, and Squared Recoil Stops for a Secure Zero Hold and Return to Zero
•
(34MM) 20mm Saddle Height, 37mm Center Height, Fits 34mm Tube Optics with an Objective Outer Diameter up to 74mm(30MM) 22mm Saddle Height, 37mm Center Height, Fits 30mm Tube Optics with an Objective Outer Diameter up to 74mm
Leapers
UTG | OP3 | 3-12X44 30MM COMPACT SCOPE
$225.99
UTG OP3 3-12X44 30MM COMPACT SCOPE, AO, IE, GLASS UMOA (OP3-GM3124UMOA)
Built on TRUE STRENGTH® Platform and Completely Sealed and Nitrogen Filled for Reliable Shockproof and Zero Holding Performance
IPX7 Waterproof Rated
30mm Tube with Best in Class Emerald Lens Coatings to Achieve Maximum Light Transmission for Best Clarity
Premium Low Top Zero Lockable and Resettable Target Turrets with Precise 1/4 MOA per Click Adjustment
UMOA Range Estimating Etched Glass Reticle
Innovative EZ-TAP® Illumination Enhancing (IE®) System with Red/Green Dual-Color and 36 Multi-Color Mode to Accommodate All Weather/Light Conditions (US Pat. 8437079; EU Pat. EP2520894)
1-Click Illumination Memory Feature Gets the User Right Back to the Color/Brightness Setting Last Used
Low Top Side Wheel Adjustable Turret (SWAT) for Parallax Adjustment from 10 Yards to Infinity
Fine Tune Adjustable/Lockable Eyepiece Diopter
Complete with Flip-open Lens Caps, 3" Removable Threaded Sunshade, Cleaning Cloth, and Medium Profile Max Strength Twist Lock Picatinny/Weaver Rings
ACCESSORIES INCLUDED
MaxStrength Picatinny/Weaver Rings, 1 Pair
3 Inch Sunshade
Flip-open Lens Caps
R2032 3V High Energy Lithium Battery
Hex Screw
Allen Wrench 3mm
Allen Wrench 1.5mm
Cleaning Cloth
User Manual
UTG
UTG | Over Bore Bipod | 7"-11" Center Height | Picatinny
$169.99
$184.99
Quick Detachable Picatinny Base Designed to Mount onto the Top or Bottom Picatinny Rail of Handguards
•
Wide Open Angle Improves Stability
•
Matte Black Anodized Aircraft Aluminum Construction with Reinforced Steel Components
•
3 Position Folding Legs Equipped with Rubberized Foot Pads
•
Lockable and Height Adjustable Legs Providing a Center Height from 7"-11"
•
22° Panning and 44° Tension Adjustable Left and Right Tilt
•
Posi-lock Push Buttons Feature a Large Surface Area for Easier Use while Wearing Gloves
ITEM NUMBER :
TL-BPOB01-A
Leapers
UTG ACCU-SYNC QR | 2 PCs Medium Profile | PICATINNY Rings
$74.99
$84.99
ITEM NUMBER: AQR315 (30mm) | AQR415 (34mm)
•
Precision CNC Machined from 6061-T6 Aluminum and Finished in a Matte Black Anodization
•
Lightening Cuts Reduce Overall Weight Without Compromising Durability
•
All Sharp Edges and Corners Removed and Radiused
•
Quick Release (QR) Mount Features Tool-free Tension Adjustment, Locking Quick Release Lever, and Squared Recoil Stops for a Secure Zero Hold and Return to Zero
•
(34MM) 15mm Saddle Height, 32mm Center Height, Fits 34mm Tube Optics with an Objective Outer Diameter up to 64mm(30MM) 15mm Saddle Height, 30mm Center Height, Fits 30mm Tube Optics with an Objective Outer Diameter up to 60mm