Airgun Accessories Bipods Adapters & More in Stock – Page 5

Saber Tactical Saber Tactical | 60MM BOTTLE CLAMP ST0004 $69.99

If you're uneasy about drilling into your factory gun stock, this 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. Has rubber pads on the inside to prevent any marring to your bottle. This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories. Features: 6061 T6 aluminum Matte black anodize Compatible with: FX Carbon Fiber & Steel BottlesRAW (HM1000X, etc)Daystate (Redwolf, Airwolf, etc)Brocock (Commander, Bantam, etc)AEA HP Carbines (With Carbon Fiber Tanks)

Stainless Steel Extended Quick Disconnect w/ Foster Fitting M32

DonnyFL Stainless Steel Extended Quick Disconnect w/ Foster Fitting M32 $24.99

This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts. 1/8 BSP male threads Max 5000 psi (Do not exceed recommended pressure) Release collar close to 1.20 inches long Comes with sealed washer

The Pellet Shop TPS | Pellet Savers $1.25

The Pellet Shop Pellet Savers!Pellet savers wrap around your tin and prevent it from accidently opening while traveling. Save your pellets from unwanted damaged while you're on the road !

UNIVERSAL PICATINNY TO ARCA LARGE VERSION ST0025

Saber Tactical UNIVERSAL PICATINNY TO ARCA LARGE VERSION ST0025 $164.99

Easily clamp this Arca Swiss rail to an existing picatinny rail to extend the bipod rail. T slots on both sides allowing you to attach T slot/M Lok accessories. Features: 6061 T6 aluminum black anodize 4mm hex key required to loosen and tighten clamp 1/4 - 20 threads to connect common camera tripod adapters 2.25 inches wide x 7 inches long 7.7 oz

Saber Tactical UNIVERSAL PICATINNY TO PICATINNY RAIL ST0032 $79.99

UNIVERSAL PICATINNY TO PICATINNY RAIL -2 Inch Arca -4.5 Inch of picatinny -1/4-20 Threaded hole for camera tripod adapter

-7% sale

UTG UTG PRO | Keymod Picatinny Rail Section $13.95 $14.95

• Proudly Designed and Made in USA• Innovative Rail Edge Design Providing True Continuous Rail Slots When Connecting Multiple Rail Sections• Precision Machined from Aircraft Grade Aluminum Alloy with Anodizing• Includes Required Keymod Compatible Steel Locking Nuts, Steel Allen Screws and Allen Wrench for InstallationItem Number-8 Slot: MTURS04M-4 Slot: MTURS04S

sale

UTG UTG Recon 360 TL Bipod | Picatinny from $73.99 $89.99

UTG Recon 360 TL Bipod Features: • 3 Position Folding Legs and Lockable Leg Extensions Equipped with Nonslip Rubberized Foot Pads • Center Height Adjustable from 5.5"-7" | 7"-9" | 8"-12" • Fine-tunable Tension Adjustment Lever Applies the User Desired Amount of Tension to the Bipod's 360° Panning & 15° Forward, Rearward, Left, and Right Tilt • Low Profile Offset Picatinny Mount with Knurled Thumb Nut and Reinforced Steel Cross Bolt • Durable Aircraft Aluminum Construction Finished in a Matte Black Anodization

UTG | .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor Mount

UTG UTG | .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor Mount $12.99

• .22/Airgun Dovetail to Picatinny/Weaver Rail Adaptor • Innovative Rail Platform to Convert Most .22/Airgun Rails • Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base • Extremely Low Profile and Lightweight • Precision and Repeatable Alignment • Easy Installation with Most .22/Airgun Rails, 2PCs/Set • Removable Stop Pin for Extra Secure Installation

-7% sale

UTG UTG | Dovetail to Picatinny/Weaver Rail Adaptor Mount $14.99 $15.99

• Matte Black Anodized 6061-T6 Aluminum Construction • 3.94" Scalloped 9 Slot Picatinny Rail with 0.59" Saddle Height • Compatible with Most 9mm - 11mm Flat or Round Dovetail Rails • Full Length Locking Side Plate for a Secure and Repeatable Zero Hold • Optional Recoil Stop Pin Provides Additional Retention Against Bidirectional Recoil

-5% sale

UTG UTG | Over Bore Bipod | 7"-11" Center Height | Picatinny $175.99 $184.99

Quick Detachable Picatinny Base Designed to Mount onto the Top or Bottom Picatinny Rail of Handguards • Wide Open Angle Improves Stability • Matte Black Anodized Aircraft Aluminum Construction with Reinforced Steel Components • 3 Position Folding Legs Equipped with Rubberized Foot Pads • Lockable and Height Adjustable Legs Providing a Center Height from 7"-11" • 22° Panning and 44° Tension Adjustable Left and Right Tilt • Posi-lock Push Buttons Feature a Large Surface Area for Easier Use while Wearing Gloves ITEM NUMBER : TL-BPOB01-A

Black Arts Design Zeus Gen 2 | Barrel Band $49.99

The AEA Zeus .72 cal. has power but that power comes with a price…it is loud! DonnyFL took on quieting the thunderous roar of the Zeus with the Great Kami. The weight of the Great Kami at the end of the Zeus’s barrel causes barrel droop lowering the POI significantly. Black Arts Design stepped in to end this droop with the AEA Zeus Barrel Band.

Saber Tactical FX IMPACT LOW PROFILE 3 FULL ARCA SWISS RAIL from $154.99

***Also works for the Impact m4*** For those that do not need picatinny slots at the end of their rail, this one has full arca. Ideal for the 580cc and 700cc bottles. Features: MLok slots at the bottom and on both sides of the rail for add-on accessories. Low profile, hugs closer to the bottle Sling QD slots on both sides 6061 T6 Alluminum Black anodize From start of trigger guard until the end of rail is 15.75 inches x 2.75 inches wide Includes an extended dust fill cap

Black Arts Design Air Venturi Avenger Barrel Band $40.00

The Gen2 Black Arts Design Barrel Band System is designed to reduce the POI shifts inherent in the Air Venturi Avenger and tighten its groups. We developed a 2-component system that removes the main problem, the factory barrel band. The Air Venturi Avenger factory barrel band ties the forend of the stock directly to the barrel. Any pressure applied to the forend is fed directly to the barrel via the factory barrel band. Our 2-component system divorces the forend and lower air tube from the barrel. This is accomplished through our Forend Bracket which secures the forend to ONLY the lower air tube. The Forend Bracket does not contact the upper air tube or barrel shroud. This ends the intimate relationship between the stock forend and barrel. Our Barrel Band then ties ONLY the upper air tube and barrel providing stability. These 2 components will tighten groups and drastically reduce the seemingly random POI shifts. We highly recommend the DonnyFL Avenger Extender 1/2×20 Adapter be paired with our 2 component Barrel Band System. Material Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fibers increases flexural modulus (stiffness) well above standard PETG. TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant to abrasion. Features The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation. TPU has rubber like characteristics adding dampening qualities to our barrel band. No grub screws! The lower section clamps securely with a single M3 alloy steel screw and nut. The nut is held captive within an internal slot providing a secure hold while maintaining a clean appearance. Bolstered design along the circumference increases flexural modulus (stiffness) and aesthetic appeal. Installation Instructions Gen2: https://blackartsdesign.com/avenger-gen2-barrel-band-system-installation/ Installation Instructions (systems sold prior to 04/08/22): https://blackartsdesign.com/air-venturi-avenger-barrel-band-system-install/

Black Arts Design Challenger Pro | Barrel Band $49.99

The Black Arts Design Barrel Band, AKA Barrel Support Stabilizer, reduces the likelihood of POI shifts from bumps to the barrel and ends barrel droop induced by moderators. Our Gen2 barrel shroud section houses two TPU bushings. These bushings allow for a very snug fit but still allow a no hassle installation. The lower section clamps to the air tube with two M3 screws providing substantial resistance to movement. Material: - Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, andhigh dimensional accuracy. The addition of carbon fibers increases flexural modulus(stiffness) well above standard PETG.- TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant toabrasion. Features: -The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation.- TPU has rubber like characteristics adding dampening qualities to our barrel band.- No grub screws! The lower section clamps securely with two alloy steel screws and nuts.Nuts are held captive within internal slots providing a secure hold while maintaining aclean appearance.- Bolstered design along the circumference increases flexural modulus (stiffness) andaesthetic appeal.

FX FX Impact | STX Slug Tensioned Barrel Kit from $520.99

*SHIPS WITH HEAVY SUPERIOR SLUG LINER The advancement of slug shooting and the enhancements to the FX Impact have shooters wanting to use heavier slugs at faster speeds. This requires a more rigid barrel to handle the additional energy and vibrations created by these projectiles. The new FX Tensioned Barrel System adds the firmness needed to let you reach the potential of the FX Impact with heavy slugs, all while maintaining the extreme accuracy everyone expects from an FX Airgun. Conceived and created by the famed airgun engineer Hein Frommann, who perfected it through a global collaboration with Johan & Fredrik Axelsson (Sweden), Matt Dubber & Roelf Vorster (South Africa) & Ernest Rowe (USA). The result is really showing off the brain trust at FX Airguns. From a barrel harmonics perspective, the tensioner system reduces the amplitude of barrel movement which results in better accuracy and more consistency. Secondarily the rigidness of the barrel becomes more temperature stable and will further hold zero regardless of conditions and to handle knocks to the barrel during hunting, PRS courses, etc. 800mm Barrel To push the boundaries of what small bore slugs can do, FX is introducing an 800mm Slug Tensioned Barrel for the FX Impact. This barrel will allow the FX Impact to shoot heavier slugs at the speeds needed to create a higher BC which will allow the Impact to shoot at further distances. All FX Tensioned Barrels allow the shooter to use a moderator. 1/2” UNF threads come standard on all but the .35 Calibers, which use an M18x1 thread. When installing the tension nut, tighten until the nut is flush with the carbon fiber housing, then tighten an additional quarter turn. Additional torque is not needed. Note: The tensioned barrel is not really needed for those shooting pellets as pellets use less pressure and produces less movement to the barrel (except for the .35 caliber that does benefit from the tensioner). *In order to get the advertised velocities (40gr. slugs @ 1040 fps) you will need an 800mm Impact with Power Block, 720 Power Plenum, Pin Probe & Tungsten Hammer Weight.

Find anything you need

Fast Shipping

Quality Control

Mounting & Sighting