Airgun Accessories Bipods Adapters & More in Stock – Page 9

UTG UTG | QD SLING SWIVEL ADAPTOR, PICATINNY 45 DEGREE ANGLED OFFSET $12.50

Part Number: TL-SWPM01 • UTG Low Profile Picatinny-mount 45 Degree Angled Offset Quick-detach Sling Swivel Adaptor• Precision Machined from Aircraft Grade Aluminum with Hard Anodizing Matte Black Finish• Rugged Mounting Base with Max Strength Torx Drive Locking Screw to Fit on Picatinny Rail,• Extremely Compact, Lightweight, and Super Low Profile• Accepts any Quick Detach Sling Swivel with 0.37” Diameter Swivel Stud• Mount Reversible for Right- or Left-handed Sling Use• QD Swivel Housing Designed with Quarter-turn Rotational Overtravel Stops to Better Control Sling Position and Movement• Includes T20 Torx Allen Wrench for Simple and Friendly Installation, No Gunsmith Required

Black Arts Design AEA Airguns Gauge Protector $12.00

The Black Arts Design gauge protector was designed to protect the pressure gauges on the AEA line of Airguns.

Saber Tactical | RAW HM1000 Chassis - ST0058

Saber Tactical Saber Tactical | RAW HM1000 Chassis - ST0058 $350.00

Note: Does not include rear buttstock. if you have the wooden version, you'll need to source one. The Saber Tactical Raw HM1000 chassis is the perfect upgrade for your air rifle. Made from high-quality 6061 aluminum, this chassis is both lightweight and durable, giving you the perfect balance of strength and maneuverability. The MLOK slots on the side and bottom of the rail allow you to attach your favorite accessories, making customization easy and effective. Whether you're looking to add a flashlight, bipod, or anything in between, the MLOK slots give you the versatility to get the job done right. Starting from the trigger guard, you'll have about 15.25 inches of arca rail below allowing you to position a bipod further out. Additionally, the 1/4-20 threads on the bottom of the chassis allow for easy attachment to a camera tripod adapter. Finally, the quick disconnect holes located on both sides of the chassis make it easy to attach a sling, adding an additional layer of comfort and convenience to your shooting experience. Overall, the Saber Tactical Raw HM1000 chassis is the perfect upgrade for anyone looking to take their air rifle performance to the next level. So why wait? Order yours today and get ready to take on the competition with confidence and style!

Saber Tactical Saber Tactical Rail Weight V2 ST0062 $120.00

Looking to improve your performance for competition shooting? The MLOK weights with brass inserts are the solution you've been seeking! Designed to balance your gun, these weights are crafted from high-quality 304 steel, ensuring a durable and sturdy construction that will last you many competitions to come.The MLOK weights feature brass inserts which help to redistribute the weight of your gun, creating a more balanced and stable shooting experience. The electro-plating finish adds an extra layer of protection to resist wear and tear, ensuring your MLOK weights stay in top condition for longer.MLOK weights with brass inserts are easy to install and compatible with most MLOK rails, making them a versatile addition to any shooting setup. Features a striking gun metal gray color with a mirror finish, complemented by brass insertsSet of 2

Saber Tactical | FX Crown Chassis | ST0021

Saber Tactical Saber Tactical | FX Crown Chassis | ST0021 $600.00

***THE NEW VERSION HAS A GAP THAT WILL NOT ALLOW FOR THE MAGNET ON THE FOLDING STOCK TO ENGAGE DUE TO THE DESIGN OF THE M-LOK RAIL*** Features: Arca Swiss rail with a short Picatinny rail in front. Arca Swiss rail with M Lok mounts. Foldable stock magnetically secured. Built-in detachable bag rider. Adjustable cheek rest. Our very popular adjustable buttstock. QD sling mount holes are integrated into the stock on both sides. Weighs about 6lbs.

FX Panthera/Dynamic Folding Stock Adapter

FX Airguns FX Panthera/Dynamic Folding Stock Adapter $79.99

FX Panthera Folding Stock Adaptor This FX Folding Stock Panthera adapter enables you to put a foldable stock onto the FX Panthera. Doing so will make transporting the Panthera considerably easier and it will also be easier to carry it around with you. The adapter is suited for a standard AR buffer tube and it has M28x1.5 internal thread. You can firmly attach it to the Panthera thanks to four screws. It has a lever with a powerful spring, that enables you to unlock the foldable stock. Both the spring and the lock will ensure the stock will remain in place with next to no clearance. The FX Folding Stock Panthera adapter is entirely made of impact-resistant, black anodized aluminium.

AEA Precision Airguns Element MAX Rear Tank Assembly $189.00

Rear tank upgrade for the AEA Element MAX -300cc capacity Includes the adapter, tank and clamp assembly *AEA no longer includes the rubber buttpad*

AEA Precision Airguns AEA | Fill Probe $15.00

*DUE TO THE NATURE OF THIS ITEM, FILL PROBES CAN NOT BE RETURNED OR EXCHANGED* Fill Probe for AEA Airguns8MM & 7MM

Sold out

AEA Precision Airguns AEA | Hammer Spring $15.00

AEA Hammer spring for HP & SF Models

AEA Precision Airguns AEA | Folding Stock adapter $45.00

Replacement folding stock adapter for AEA Airguns

AEA Precision Airguns AEA | Valve Pin $15.00

*DUE TO THE NATURE OF THIS ITEM, VALVE PINS CAN NOT BE RETURNED OR EXCHANGED* Replacement Valve pin for AEA Airguns FITS -HP Models (SS, SS PLUS, CARBINE, Standard, Varmint) -SF Models (Compact/Standard/Sniper) -Challenger 24” Models (.22 Cal / .25 Cal / .30 Cal) Only / Will not work with .35 cal or 32” model challenger series rifles

AEA Precision Airguns AEA | Air Gauge $20.00

Replacement Air Gauge for AEA Airguns

Saber Tactical Fx Panthera | Drop-down Front Bottle Adapter | ST0060 $59.99

The new Saber Tactical adapter allows a bottle to be attached to the front end of the Panthera while continuing to use either the stock Panthera Rail or the Saber Tactical Panthera Rail. PRODUCT FEATURES - 7.6oz in weight- Made of 304 Stainless Steele with electroplating

-10% sale

Accu-Tac Accu-Tac | WB-4 Bipod $423.00 $470.00

Description The WB-4 Wide Body bipod was designed to provide desired height and extra stability. This bipod style is ideal for long-range, extreme long-range, bench-rest, and for the airsoft platform. The wide, lowered center allows the rifle to sit between the legs which supports accuracy and helps reduce movement from recoil. This is only a suggested use, this model is not exclusive for these applications. The WB-4 is 100% billet, made from the highest quality aircraft aluminum available. This model has the versatility you want in a bipod with its 4 individual leg positions and 5 notch height options. It also has the ability to cant, which can be locked and secured with the adjustable lever. Our quick detach rail mount is simple, quick, and very secure, it attaches to a 1913 Picatinny rail and mounts in seconds without the need to use extra tools for tightening. To engage or adjust leg position, simply pull the spring-loaded leg downward to move each leg independently. Leg position can be deployed to 90° or 45°, locking securely into 4 positions. Please keep in mind the cant adjustment lever can be repositioned, DO NOT use a tool to tighten the canting tension. Please click here to see how. Materials 6061 T6 Aluminum alloy / High strength steel hardware Min. Height (Legs at 45°) 4.5" / 114.3 mm Min. Height (Legs at 90°) 6.0" / 152.4 mm Max. Height (Legs at 90°) 7.5” / 190.5 mm Min. Stance (Legs at 45°) 10.0” / 254 mm Max. Stance (Legs at 90°) 14.0" / 355.6 mm Closed Position Width 5.0" / 127 mm Closed Position Length 7.5” / 190 mm Weight 22.08 oz Color Flat Black Coating Type III ( MIL-SPEC ) Hard Anodize

Saber Tactical Arca to Picatinny Adapter | ST0066 $64.99

Perfect solution to convert your Arca Rail to Picatinny Adapter. Features: 3.5 ounces crafted from high-quality 6061 aluminum 2 inches x 1.95 inches

Find anything you need

Accessories, Bi-Pods & Tri-Pods

Fast Shipping

Quality Control

Mounting & Sighting