DonnyFL
AEA | Element 1/2 x 20 Adapter | #A93
$39.99
This adapter fits factory carbon fiber shroud allowing you to screw on an airgun suppressor with 1/2 x 20 threads.
Features:
6061 Aluminum T6
Black Anodized
Knurled thread protector
DonnyFL
Benjamin Marauder Pistol (Prod) Extended Adapter #A78
$44.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF
This adapter extends the shroud 1.5 inches or about 38.1mm. Pair it up with a .22-25 Tanto 1/2 x 20 Bolt #S69 and this pistol will be very quiet. No need to remove the suppressor to fill the gun.
Features:
6061 Aluminum
Black anodized
Comes with knurled thread protector
Western Airguns
Western Airguns | Rattler Moderator Adapter | M18X1
$44.99
Western Airguns Rattler Moderator Adapter M18x1
DonnyFL
Benjamin Marauder Pistol (Prod) & Daystate Huntsman Regal Moderator Adapter #A17
$39.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF
Want to make your Prod quieter? You'll need this 1/2 x 20 adapter that will screw into the OEM shroud. The threads that screws into the shroud is 11/16 - 24.
The .25 Sumo 1/2 x 20 is my favorite suppressor for this gun. The .25 works great with the .22 and reduces the chance of pellet clipping. However, in order to fill this gun with the Sumo, you'll have to remove the suppressor. An alternative is to go with either the Tanto or KOI with cone rear cap.
*Highly recommend going with a caliber one size up to reduce the chance of pellet clipping.
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
DonnyFL
EDGun | M14x1.25 To 1/2 x 20 Barrel Adapter A98
from $23.00
Adapters are threaded for attaching a moderator
Thread: M14x1.25 to 1/2 x 20 UNF
This adapter is about 22mm OD x 38.30mm Length. It converts barrel threads from M14x1.25 to 1/2 x 20.
Works on EDgun Leshiy 2 (use with aluminum handguard to mount on bigger moderators)
Silver Does not come with a thread protector.
Features:
6061 T6 Aluminum
Silver (no anodize)
DonnyFL
Hatsan Bullmaster | Invader | Galatian 1/2 x 20 Moderator Adapter #A35
$39.99
#A35 Adapter
1/2 x 20 UNF adapter for those rapid firing Bullmaster. New and improve design to allow more air flow.
Please note that when you add a suppressor to this gun, it does not properly index the magazine. It uses blowback air to advance the magazine however with a suppressor on, it over rotates and causes it to not properly index. If you plan to single load it'll work fine. Some customers have been able to get the gun to work properly by swapping out the spring inside the shroud with a different strength one. Will take trial an error.
Similar to the Blitz, this guy may need a lighter spring to work with a suppressor. I got mine from Ace hardware. See picture
Features:
Compatible up to .30 caliber
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
DonnyFL
Sam Yang .50 cal Dragon Claw A47
$50.00
Product description
Sam Yangs are known to output some crazy power. This adapter with M18x1 threads will allow you to screw on the Emperor v3. You might have need the Extender as well if Silence is a Priority!
DonnyFL
JTS | Aircuda & Aircuda MAX Adapter | A115
$49.99
Product description
Elevate your shooting experience with the DonnyFL JTS Aircuda and Aircuda MAX Adapter. Expertly crafted to let you seamlessly attach a DonnyFL Moderator to your rifle, this adapter ensures you can shoot with enhanced precision and reduced noise.
Key Features:
Compatibility: Perfect fit for JTS Aircuda and Aircuda MAX rifles. Suitable for .22, .25, .30 caliber variants.
Premium Material: Made with high-grade 6061 aluminum, ensuring durability and a lightweight feel.
Because this adapter was made to fit both the Standard and Max versions of the AirCuda, and because of the variations between individual rifles, you may find that one or two threads remain exposed when you snug the adapter in place. This is normal, and will not effect the performance of the rifle. In fact, our testing has revealed that a longer or heavier moderator can be used with less risk of clipping as compared to the endcap-only style adapter. It was necessary to design in this flexibility to overcome the challenges of this airgun's shroud design so that moderators can be used.
DonnyFL
Airforce | Texan LSS Adapter A65
$39.99
This adapter screws directly to the end of the factory Texan LSS shroud.
It has M18x1 male threads to pair with my big bore suppressors. Add an Emperor or Ronin to tame the beast!
Features:
6061 Aluminum
Matte black anodize
knurled thread protector
Saber Tactical
Fx Panthera Front Bottle Adapter ST0056
$29.99
The Saber Tactical Fx Panthera Front Bottle Adapter is designed for convenience. It allows you to attach a second bottle of compressed air to the front of your rifle, providing a really nice alternate placement option for your bottles. The adapter is constructed with stainless steel for durability and attaches easily to the front of your rifle, allowing both bottles to work in tandem for extended shooting sessions. Upgrade your shooting experience with the Saber Tactical Fx Panthera Front Bottle Adapter.
DonnyFL
Skout | Epoch Moderator Adapter #A108
$39.99
If you prefer not to use the factory Skout moderator, you can use this adapter to allow it to screw on a different moderator with 1/2 x 20 threads.
Features:
6061 Aluminum
Black anodize
Knurled thread protector
Compatible up to .30 caliber
DonnyFL
Huben GK1 Pistol Adapter | A116
$34.99
Product description
This adapter allows you to add a 1/2 x 20 moderator or muzzle brake to your Huben GK1 Pistol.
Features:
6061 T6 Aluminum
Black Anodize
Knurled thread protector
Western Airguns
Western Airguns | Mordax Extender w/ Magazine Holder
$49.99
This stock extender has been designed to increase the length of pull on the Western Mordax with the added bonus of magnetic storage for an spare magazine.
DonnyFL
Epoch Moderator Adapter #A112
$39.99
Product description
If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with M18X1 threads.
Features:
6061 Aluminum
Black anodize
Knurled thread protector
Made for the .357 caliber Skout
huben
Huben | GK1 Universal Rear Sight Mount (CNC Aluminum)
$79.99
Enhance your GK1 with our new low-profile sight mount plate.
This RMR footprint plate allows you to mount a red dot / reflex sight to your GK1. It requires no drilling or tapping or other modification of your GK1!
This CNC-machined anodized aluminum sight mount is 100% designed and manufactured in the USA!
This mount is stabilized with two "wings" along the sides to align the plate and take up any slop.
Compatibility:
Works with ALL GK1s
RMR footprint sights only
Works perfectly with our Holosun RMR Sights
Package Includes:
Sight Mount Plate
Longer rear mount screw to replace your rear Huben GK1 screw
Does NOT include red dot sight.