DonnyFL
FX/DonnyFL Moderator
$119.99
This is a custom size that comes with your FX guns if you decide to upgrade the suppressor. Same length as the Tanto but larger in diameter. The outer diameter is comparable to the FX factory suppressor.
Features:
1.36 x 5 inches
Available in .25 & 30
Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.
We don't recommend using this with the FX Panthera or FX Panthera Hunter.
DonnyFL
DonnyFL | TANTO Moderator
$99.99
Features:
1.22 x 5 inches
Available in .22/.25 and .30
Mono-core design
Precision CNC’ed by professional machinist
Sand blasted and anodized for maximum durability
Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt or 1/2 x 20 Cone
Comes pre-wrapped in felt
Machined grooves on the outside for easy handling
Tanto with cone endcap is 5.37 inches
Weight:
1. With 1/2 x 20 Bolt rear end cap: 3.9 oz2. With 1/2 x 20 Cone rear end cap: 4.1 oz3. With M20x1 Bolt rear end cap: 3.5 oz*Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.
DonnyFL
DonnyFL | END CAP/QD ADAPTER
from $20.00
FEATURES:
Rear caps for existing moderators
M71 = Sumo/Tatsu/Shogun QD rear cap with 1/2 x 20M72 = Ronin/Emperor/ Fat Boy QD rear cap with 1/2 x 20M73 = KOI/Tanto QD rear cap with 1/2 x 20M74 = FX/DonnyFL QD rear cap with 1/2 x 20M86 - Ronin/Emperor QD rear cap with M18x1
M87= FX/DonnyFL QD rear cap with M18x1
QD AdaptersM75 = QD barrel adapter M14x1.25M76 = QD barrel adapter M18x1M77 = QD barrel adapter M20x1M78 = QD barrel adapter 1/2 x 20
Product details:
Indexed so it locks on at same position every time
Made of 7075 aluminum
Grey anodized
Includes barrel/shroud adapter and rear cap
Select the barrel thread specific to your airgun
DISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.Compatibility: Will not work on old moderators with the flat front cap.
DonnyFL
DonnyFL | SHOGUN +P .25/30 cal with 1/2X20 Endcap - Airgun Moderator
$175.50
$195.00
Product description
The Shogun +P takes our popular Shogun design and strengthens it for today’s high-power, slug-focused, PCP rifles. This upgraded version features an additional layer of metal mesh, secured with stainless-steel straps, giving the internal structure greater durability and longer service life under heavy use on small-bore PCP airguns.
The Shogun +P remains 1.5 inches longer than the Sumo, offering excellent noise reduction with its expanded chambers and mono-core layout—but now with tougher internals built to handle harder-hitting platforms.
Key Features:• +P reinforced core with metal mesh & stainless-steel strapping• Built for high-power, high-pressure small-bore PCP rifles• Longer body & expanded chambers for superior noise reduction• Mono-core design for accuracy and reduced clipping• CNC machined, no epoxy, fully serviceable in seconds• Lightweight and includes protective storage tube
Stronger, quieter, and designed for a new generation of air rifles like the new AirForce Condor Slug Barrel Rifles—the Shogun +P is built to take more punishment while delivering the quiet performance DonnyFL is known for.
Important Information:
Regular Inspection: Regular removal of the monocore from the shell to inspect the strapping, mesh and felt is necessary for safety, effectiveness and long life of this moderator. Watch for bunching of the felt under the mesh, and smooth and replace as needed. These internal components are consumable, and refreshing/rebuilding services are available.
Visual Notes: If you see white lines on the inside of the front cap, that's normal. They were caused by the prongs holding the pieces while anodizing, not pellet clippings.
Adapter May Be Required: The Moderator does not come with an adapter. Please check our adapter section for the specific adapter associated with your air rifle.
Intended Use: Made for airguns only. Will not work for firearms. Please read the disclaimer.
International Customers: If you add this item to your cart, shipping options will not be available for restricted items. Non-restricted items will also not show up until the restricted item is removed.
Return Policy: Please review our return policy for more details.
Why Choose DonnyFL?
Expert Craftsmanship: DonnyFL products are precision CNC-machined by professional machinists, ensuring the highest quality and performance.
Innovative Design: Our moderators are designed with cutting-edge features to enhance your shooting experience.
Durability: Built with top-notch materials and finishes, DonnyFL products are made to last.
Customer Satisfaction: We prioritize customer satisfaction with reliable products and excellent customer service.
Upgrade your airgun with the DonnyFL SHOGUN +P moderator and experience superior noise reduction and performance. Order now and enhance your shooting experience!
DonnyFL
DonnyFL | EMPEROR +P .457/50 cal with M18x1 Endcap - Airgun Moderator
$225.00
$249.99
Product description
The Emperor v3 +P is built for shooters running the newest generation of high-pressure big-bore PCP rifles. This upgraded +P version features a strengthened internal system with an extra layer of metal mesh, secured with stainless-steel straps and additional zip-ties for superior durability and consistent performance under extreme pressures.
Already known for its impressive sound suppression, the Emperor v3 +P retains its modular design—allowing you to add an optional 6.5-inch extender for even quieter shots—and maintains the rugged feel and reliability DonnyFL is known for.
Key Features:• +P reinforced internals with metal mesh & stainless-steel strapping• Built for .457 to .50 caliber high-power airguns• Mono-core design for strength, accuracy, and minimal clipping• Optional 6.5-inch extender for maximum suppression• Precision CNC machined 6061 aluminum body• Pre-wrapped in felt and mesh for noise reduction• Easy-grip machined grooves for handling• Lightweight (approx. 16 oz) and includes protective storage tube
Stronger, quieter, and engineered for high-pressure and short-barreled big-bore airguns—the Emperor v3 +P is the ultimate moderator for serious high-energy airgun setups.
Important Information:
Adapter May Be Required: The Moderator does not come with an adapter. Best results will come with a threaded barrel. Please check our adapter section for the specific adapter associated with your air rifle. If you are using a slide-on adapter, we recommend drilling a divot into your barrel to match each of the set-screws for a more secure installation.
Regular Inspection: Regular removal of the monocore from the shell to inspect the strapping, mesh and felt is necessary for safety, effectiveness and long life of this moderator. Watch for breakage of the plastic zip ties and bunching of the felt, and smooth and replace as needed. These internal components are consumable, and refreshing/rebuilding services are available.
Intended Use: Made for airguns only. Will not work for firearms. Please read the disclaimer.
International Customers: If you add this item to your cart, shipping options will not be available for restricted items. Non-restricted items will also not show up until the restricted item is removed.
Return Policy: Please review our return policy for more details.