DonnyFL
Epoch Moderator Adapter #A112
$39.99
Product description
If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with M18X1 threads.
Features:
6061 Aluminum
Black anodize
Knurled thread protector
Made for the .357 caliber Skout
DonnyFL
Extended Quick Disconnect 1/8 BSP #M20
$19.99
This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts.
1/8 BSP male threads
Max 5000 psi (Do not exceed recommended pressure)
Release collar close to 1.20 inches long
Comes with sealed washer
Saber Tactical
Fx Panthera | Drop-down Front Bottle Adapter | ST0060
$59.99
The new Saber Tactical adapter allows a bottle to be attached to the front end of the Panthera while continuing to use either the stock Panthera Rail or the Saber Tactical Panthera Rail.
PRODUCT FEATURES
- 7.6oz in weight- Made of 304 Stainless Steele with electroplating
DonnyFL
FX Wildcat Mag Holder M27
$25.00
With Matt247365 from Airgun Nation's blessing, I am happy to offer these easy to install Wildcat mag holders. Compatible with .177 .22 .25 and .30 caliber. Your magazine clicks securely into the Mag holder using it’s own ball bearing and can rotate for easy loading with one hand while on the gun. As many as 4 Magholders can fit on the Wildcat at one time. You can mount 1, 2, 3 or 4 in a variety of configurations facing either to the front or to the rear and on either side or on both sides.
Features:
Made of 6061 T6 aluminum
black anodize
CNC machined
Uses 2.5 mm Hex key
DonnyFL
Hatsan Blitz M18 X 1 Adapter A117
$39.99
This adapter allows you to screw on an airgun suppressor with M18x1 threads.
***New Improved For More Air Flow.***
I recommend going with the Ronin with this gun. I have it installed on my personal gun and it works flawlessly. However, results may vary and might need modification to work in semi auto mode. This gun is similar to the Bullmaster and others have been able to fix the issue by replacing the spring. Go to your hardware store and look for a lighter spring. I got mine from Ace hardware and it fixed the magazine indexing issue.
Features:
Compatible up to .30 caliber
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
Important information:
The only Moderator that is recommended with the Blitz is the RONIN .25/.30 M18, #S20A Click Here
DonnyFL
Hatsan Bullmaster | Invader | Galatian 1/2 x 20 Moderator Adapter #A35
$39.99
#A35 Adapter
1/2 x 20 UNF adapter for those rapid firing Bullmaster. New and improve design to allow more air flow.
Please note that when you add a suppressor to this gun, it does not properly index the magazine. It uses blowback air to advance the magazine however with a suppressor on, it over rotates and causes it to not properly index. If you plan to single load it'll work fine. Some customers have been able to get the gun to work properly by swapping out the spring inside the shroud with a different strength one. Will take trial an error.
Similar to the Blitz, this guy may need a lighter spring to work with a suppressor. I got mine from Ace hardware. See picture
Features:
Compatible up to .30 caliber
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
DonnyFL
Hatsan Jet 1 & Jet 2 Adapter | A111
$39.99
Features:
Any gun that needs a double-sided male adapter
Has through holes in the threads for easy tightening or loosening
Matte Black Anodize threads
.655 inches / 16.6 mm OD
DonnyFL
Hatsan QE Moderator Adapter A24
$44.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF
Please note: I highly suggest getting a suppressor one size up from what your gun is. For example if you have a .25, get a .30. If you have a .30, the .30 cal suppressor is fine. This is to minimize the chance of the gun clipping.
Also if you have a Hatsan Bully .25/.30, based on customer's feedback I would go with the Emperor.
*We have not had any success with customers using a suppressor on Hatsan's line up of semi auto guns. It causes the gun to not index properly.
Features:
Matte black Anodized
CNC
Includes knurled thread protector
Compatible up to .30
Compatible with the following guns:
Hatsan GladiusHatsan Flash Wood QEHatsan AirMaxHatsan Bullboss QEHatsan BT65 QEHatsan Nova QEHatsan AT44-10 QEHatsan Hercules QEHatsan Flashpup QEHatsan AT P1Hatsan Flash QE
DonnyFL
Muzzle Brake Air Stripper Insert Kit #M58
$25.00
Upgrade kit for your fatboy muzzle brake. Comes with two air strippers for each size.
Note* Not compatible with the gold limited edition muzzle brakes.
Features:
.177/22, .22/25 and .25/30
Bronze anodize
Delrin tool to install air strippers
Saber Tactical
Saber Tactical | 50MM BOTTLE CLAMP ST0071
$59.99
PRODUCT DESCRIPTION
If you're uneasy about drilling into your factory gun stock, this 50mm bottle clamp will easily attach to your 50mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.
This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.
-Great fit for the Umarex Gauntlet 30.
Features:
6061 T6 aluminum
Matte black anodize
Saber Tactical
Saber Tactical | 52MM BOTTLE CLAMP ST0030 | AEA AIRGUNS
$59.99
Finally a PROPER Clamp is available for the AEA line of airguns. The Saber Tactical 52 mm bottle clamp Has rubber pads on the inside to prevent any marring to your bottle.
This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.
Features:
6061 T6 aluminum
Matte black anodize
Compatible with:
-AEA HP SS Plus-AEA HP SS MAX-AEA Zeus Gen 2-AEA Challenger PRO-AEA Terminator (.30 Cal version only)-Aea Airguns that utilize the 52mm size air tanks
Saber Tactical
Saber Tactical | 60MM ARCA RAIL BOTTLE CLAMP | ST0074
$69.99
This 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.
This clamp has a 2-inch arca rail at the bottom for you to connect your preferred arca accessories.
Features:
6061 T6 aluminum
Matte black anodize
Compatible with:
FX Carbon Fiber & Steel BottlesRAW (HM1000X, etc)Daystate (Redwolf, Airwolf, etc)Brocock (Commander, Bantam, etc)
Saber Tactical
Saber Tactical | 60MM BOTTLE CLAMP ST0004
$69.99
If you're uneasy about drilling into your factory gun stock, this 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. Has rubber pads on the inside to prevent any marring to your bottle.
This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.
Features:
6061 T6 aluminum
Matte black anodize
Compatible with:
FX Carbon Fiber & Steel BottlesRAW (HM1000X, etc)Daystate (Redwolf, Airwolf, etc)Brocock (Commander, Bantam, etc)AEA HP Carbines (With Carbon Fiber Tanks)
Saber Tactical
Saber Tactical | Airforce Texan/Condor Buttstock Adapter | ST0070
$25.00
Key Features:
Easy to install
Uses factory screws
6061 T6 Aluminum
Black anodize
Saber Buttstock ST0009 is sold separately here
Saber Tactical
Saber Tactical | Arca Bottle O-Clamp
from $79.99
The Saber Tactical Bottle O-Clamp builds on the foundation of our original Bottle C-Clamp by adding increased rigidity, expanded mounting options, and a more secure full-circumference interface. Designed to wrap completely around the bottle, the O-Clamp significantly improves stability while introducing both Picatinny and ARCA rail compatibility, giving shooters greater flexibility in how accessories are mounted and rigidity of their airgun platform.
To ensure a precise and secure fit, the Bottle O-Clamp uses adjustable rubberized securing inserts on opposing sides of the clamp. These inserts are tensioned via set screws, allowing fine adjustment to accommodate real-world bottle diameter variations. While available in standard 52 mm and 60 mm sizes, this adjustability is critical, as bottle dimensions can vary slightly even within the same model and manufacturer.
Machined from 6061-T6 aluminum and finished in a durable matte black anodize, the Bottle O-Clamp is built for hard use while maintaining a clean, professional appearance that integrates seamlessly with modern airgun setups.
Features
CNC-machined 6061-T6 aluminum
Matte black anodized finish
Full-circumference O-Clamp design for increased rigidity
Integrated Picatinny and ARCA mounting points
Adjustable rubberized inserts for secure, non-marring bottle fit
Available in 52 mm and 60 mm bottle sizes