FX
FX Impact | STX Slug Tensioned Barrel Kit
from $520.99
*SHIPS WITH HEAVY SUPERIOR SLUG LINER
The advancement of slug shooting and the enhancements to the FX Impact have shooters wanting to use heavier slugs at faster speeds. This requires a more rigid barrel to handle the additional energy and vibrations created by these projectiles. The new FX Tensioned Barrel System adds the firmness needed to let you reach the potential of the FX Impact with heavy slugs, all while maintaining the extreme accuracy everyone expects from an FX Airgun.
Conceived and created by the famed airgun engineer Hein Frommann, who perfected it through a global collaboration with Johan & Fredrik Axelsson (Sweden), Matt Dubber & Roelf Vorster (South Africa) & Ernest Rowe (USA). The result is really showing off the brain trust at FX Airguns.
From a barrel harmonics perspective, the tensioner system reduces the amplitude of barrel movement which results in better accuracy and more consistency. Secondarily the rigidness of the barrel becomes more temperature stable and will further hold zero regardless of conditions and to handle knocks to the barrel during hunting, PRS courses, etc.
800mm Barrel
To push the boundaries of what small bore slugs can do, FX is introducing an 800mm Slug Tensioned Barrel for the FX Impact. This barrel will allow the FX Impact to shoot heavier slugs at the speeds needed to create a higher BC which will allow the Impact to shoot at further distances.
All FX Tensioned Barrels allow the shooter to use a moderator. 1/2” UNF threads come standard on all but the .35 Calibers, which use an M18x1 thread. When installing the tension nut, tighten until the nut is flush with the carbon fiber housing, then tighten an additional quarter turn. Additional torque is not needed. Note: The tensioned barrel is not really needed for those shooting pellets as pellets use less pressure and produces less movement to the barrel (except for the .35 caliber that does benefit from the tensioner).
*In order to get the advertised velocities (40gr. slugs @ 1040 fps) you will need an 800mm Impact with Power Block, 720 Power Plenum, Pin Probe & Tungsten Hammer Weight.
FX
FX Impact | STX Barrel Kit (Smooth Twist X Superior)
from $442.99
*SHIPS WITH STX - Smooth Twist X Superior LINER*PROBE INCLUDED*MAGAZINES NOT INCLUDED
The Smooth Twist X Barrel is a fully rifled barrel liner. All barrel kits now ship with the STX Superior Liner. FX’s proprietary process of imparting the inner rifling of the barrel from the outside of the steel tubing leaves a flawlessly smooth finished rifling inside the bore. This in turn increases the accuracy of the projectile drastically and makes this a highly coveted barrel for any air gun enthusiast. These barrel kits will include the barrel, shroud & probe for the selected caliber. This barrel is housed in the Interchangeable Barrel system allowing the shooter to swap and change barrel liners of various twist rates, bore specifications and more; all to tailor the barrel to different projectile sizes. The standard barrel length is 600mm.
700mm Smooth Twist X-Barrel with Superior Liner
With the FX 700mm Smooth Twist X barrel, comes an exciting upgrade from the standard X Barrel. It is 100mm longer and provides higher accuracy due to its more efficient air consumption and stabilizing power imparted by the length of the barrel (available in both .25 and .30 caliber). The 700mm barrel can also be utilized to extract more power from the Impact for those using it in a hunting application. You can expect to gain up to 10% more muzzle energy from the barrel when tuned properly over the shorter standard 600mm X barrel.
Much like the standard FX Smooth Twist X Barrel, the 700mm barrel is housed in the FX Interchangeable liner system which allows additional barrel liners of varying twist rates and other specifications to be exchanged for different projectiles.
For those who wants to experience more power from their FX Impact or who are looking for an extra edge in their competitive shooting, we highly recommend the upgrade to the unrivaled FX 700mm Smooth Twist X Barrel.
Black Arts Design
Element Max | Barrel Band
$49.99
AEA Element Max Barrel Band
The Black Arts Design AEA Element Max Barrel Band (AKA Barrel Support Stabilizer) is designed to increase POI consistency and eliminate barrel droop instigated by the use of large moderators. In order to provide a tight fit and provide an easy install, we built in 2 large channels to accept TPU (a rubberized plastic) bushings. These bushings give way just enough to permit an easy install while still providing a tight fit, and provide some dampening characteristics. Once snugged down the single M3 screw provides ample holding force to secure the barrel while eliminating barrel droop regardless of the moderator selected. ***Fits all calibers of the Element Max***
Material
Carbon Fiber filled PETG – PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fiber increases flexural modulus (stiffness) well above standard PETG and further increases dimensional accuracy.
TPU - A rubberized plastic with dampening characteristics.
Features
Robust design built for strength and stiffness.
2 internal TPU (rubberized plastic) bushings are built into the barrel section. These bushings act as dampeners as well as aiding in installation without compromising a tight fit to the barrel.
The cap head screw is secured using a captive nut for a clean appearance.
Bolstered ridge along circumference of Barrel Band increases flexural modulus (stiffness) and aesthetic appeal.
FX
FX Maverick/Wildcat Slug Power Kit
$39.99
* .22 / .25 & .30 caliber *
FX Wildcat MKIII/Maverick Slug Power Kit
Adjustable pin probe for .22 caliber, with .25 & .30 caliber sleeve
Heavier hammer
Compatible with FX Wildcat MKIII and FX Maverick
This Slug Power Kit will increase the power of the FX Wildcat MKIII and FX Maverick when shooting slugs and allow custom tuning with a variable-length pellet probe that adjusts via an Allen bolt in the rear of the probe. The pin probe is compatible with .22 caliber versions of these air rifles, and .25 & .30 caliber versions with the included sleeve and O-rings, and allows fine-tuning that facilitates maximum accuracy.
The kit also includes a heavier hammer that will increase the power and velocity of each shot to give shooters even more performance than the base airgun provides, with possible velocity increases of up to 98 FPS.
AEA Precision Airguns
AEA | Rail Attachment Kit
from $75.00
Rail Attachment kits for AEA Airguns.Short Rail:Fits AEA HP SS w/ 41mm Air Tube Medium Rail:Fits AEA HP Standard CE w/ 41mm Air TubeLong Rail:Fits AEA Terminator .35 cal w/ 41mm Air Tube
Made of CNC aluminum
FX Airguns
FX | Carbon Fiber Bottle w/ Valve
from $259.99
FX Carbon Fiber Bottle
Compatible with FX Crown, Maverick, and Impact PCP Air Rifles
Compatible with some Dreamline models*
Includes valve
*Bottle adapter required for Deamline models*
Saber Tactical
UNIVERSAL PICATINNY TO PICATINNY RAIL ST0032
$79.99
UNIVERSAL PICATINNY TO PICATINNY RAIL
-2 Inch Arca
-4.5 Inch of picatinny
-1/4-20 Threaded hole for camera tripod adapter
AEA Precision Airguns
AEA | Magazines Megalodon
$29.99
Fits:
-AEA Megalodon 45 / 50 / 51 / 58 Cal45/50/510 Cal - 8 Rounds58 cal - 6 Rounds
FX Outdoots
FX Outdoors - True Ballistics Chronograph
$679.99
$899.99
The Chronograph That Just Works!
Imagine a chronograph that always works and that gave the actual ballistic coefficient of a round through multiple velocity readings; all in a compact portable package. No external triggers, tripods or external power needed, just a fool proof set up with all the information you will ever need for an accurate and true ballistic calculation.
The True Ballistic Radar Chronograph measures actual speeds at four different velocities readings from 0 - 300 yards to determine actual ballistic coefficient using G1/G7 drag models. This provides actual data in your conditions, info that provides the difference between a hit and a miss. What’s it worth to you to hit your target?
• No External Recoil Trigger Required
• No External Battery Pack Needed
• USB-C Reacharable Internal Battery
• Small & Portable at 1.8lbs, 7.4” x 9.6”
• Radar Tech Works Rain or Shine
• Large LCD Display Screen
• Optional Bluetooth Phone App
• Measures from 400 - 4,000+ fps
• Determine Actual Ballistic Coefficient
• Shows STD Deviation and Spread
• Indicates Subsonic Yardage
• Accurate Data Avoids Costly Misses
• Select G1/G7 Drag Models
• Signal Strength / Interference Indicator
Saber Tactical
FX IMPACT ARCA RAIL 2 ST0022
$159.99
Similar to the first Arca Rail, however this one has T slots on the both sides allowing you to attach shooting accessories such as flashlight and laser. Edges are very smooth and makes it very comfortable to shoot offhand.
Features:
Aluminum 6061 T6
Hard black anodize
Arca Swiss Rail underneath with Picatinny at the end
Also has 1/4 x 20 threads for common camera tripod attachment
Includes an extended dust fill cap
DonnyFL
Extended Quick Disconnect 1/8 BSP #M20
$19.99
This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts.
1/8 BSP male threads
Max 5000 psi (Do not exceed recommended pressure)
Release collar close to 1.20 inches long
Comes with sealed washer
UTG
UTG | QD SLING SWIVEL ADAPTOR, PICATINNY 45 DEGREE ANGLED OFFSET
$12.50
Part Number: TL-SWPM01
• UTG Low Profile Picatinny-mount 45 Degree Angled Offset Quick-detach Sling Swivel Adaptor• Precision Machined from Aircraft Grade Aluminum with Hard Anodizing Matte Black Finish• Rugged Mounting Base with Max Strength Torx Drive Locking Screw to Fit on Picatinny Rail,• Extremely Compact, Lightweight, and Super Low Profile• Accepts any Quick Detach Sling Swivel with 0.37” Diameter Swivel Stud• Mount Reversible for Right- or Left-handed Sling Use• QD Swivel Housing Designed with Quarter-turn Rotational Overtravel Stops to Better Control Sling Position and Movement• Includes T20 Torx Allen Wrench for Simple and Friendly Installation, No Gunsmith Required
FX Airguns
AirMarksman | FX Style Bottle Valve
$79.99
This USA made stainless steel valve is compatible with the following:
FX Impact (including MkII, M3, and M4)
FX Crown, FX Crown Arrow
FX Boss
FX Royale 500, FX Royale 400
FX Verminator, FX Verminator Extreme
FX Maverick
Fits any bottle with M18x1.5 neck threads.