Accessories, Bi-Pods & Tri-Pods

Saber Tactical Saber Tactical Bottle Degasser Kit (ST0020) $65.00

This kit comes in handy when you have to travel with your airguns. TSA requires that the bottles are empty and may ask you to disassemble it to show that it is empty. It has a knurled screw that screws into the bottle and releases the air. Once the tank is empty, attach the red bottle clamp onto the bottle and use the custom wrench to slowly unscrew and release any remaining air. The red bottle clamp is lined with silicone pads, it does not mark your bottle.

Saber Tactical Saber Tactical Tank Valve (ST0031) $199.99

Saber Tactical Tank Valve (ST0031) Saber Tactical presents its long awaited tank valve with big over sized knobs for easy filling and a carry handle for the easy transport! Features: -7/8-14 Threads-2.7 Inch Gauge-2.25 Inch Valve Knob-1.12 Inch Air release knob-Carry Handle-Quick Disconnect dead head to test tank pressure

Saber Tactical | 52MM BOTTLE CLAMP ST0030 | AEA AIRGUNS

Saber Tactical Saber Tactical | 52MM BOTTLE CLAMP ST0030 | AEA AIRGUNS $59.99

Finally a PROPER Clamp is available for the AEA line of airguns. The Saber Tactical 52 mm bottle clamp Has rubber pads on the inside to prevent any marring to your bottle. This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories. Features: 6061 T6 aluminum Matte black anodize Compatible with: -AEA HP SS Plus-AEA HP SS MAX-AEA Zeus Gen 2-AEA Challenger PRO-AEA Terminator (.30 Cal version only)-Aea Airguns that utilize the 52mm size air tanks

Saber Tactical Saber Tactical | 60MM BOTTLE CLAMP ST0004 $69.99

If you're uneasy about drilling into your factory gun stock, this 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. Has rubber pads on the inside to prevent any marring to your bottle. This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories. Features: 6061 T6 aluminum Matte black anodize Compatible with: FX Carbon Fiber & Steel BottlesRAW (HM1000X, etc)Daystate (Redwolf, Airwolf, etc)Brocock (Commander, Bantam, etc)AEA HP Carbines (With Carbon Fiber Tanks)

Stainless Steel Extended Quick Disconnect w/ Foster Fitting M32

DonnyFL Stainless Steel Extended Quick Disconnect w/ Foster Fitting M32 $24.99

This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts. 1/8 BSP male threads Max 5000 psi (Do not exceed recommended pressure) Release collar close to 1.20 inches long Comes with sealed washer

The Pellet Shop TPS | Pellet Savers $1.25

The Pellet Shop Pellet Savers!Pellet savers wrap around your tin and prevent it from accidently opening while traveling. Save your pellets from unwanted damaged while you're on the road !

DonnyFL Umarex Hammer M18x1 #A60 Moderator Adapter $39.99

Adapters are threaded for attaching a moderator Thread: M18 x 1 This adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector DOES NOT WORK WITH THE HAMMER CARBINE MODEL Instructions: remove the factory shroud by grabbing onto the shroud by the front cap. When you turn the shroud counter clockwise, that should loosen the front cap. The shroud is free floating, there are no threads in it. Important thing is to remove the front cap. once shroud is off, put a few drops of red loctite onto the barrel thread. put the shroud back on now take new shroud adapter and tighten onto barrel. Let it dry for a few minutes remove thread protector on shroud adapter to screw on an airgun suppressor with M18x1 threads.

UNIVERSAL PICATINNY TO ARCA LARGE VERSION ST0025

Saber Tactical UNIVERSAL PICATINNY TO ARCA LARGE VERSION ST0025 $164.99

Easily clamp this Arca Swiss rail to an existing picatinny rail to extend the bipod rail. T slots on both sides allowing you to attach T slot/M Lok accessories. Features: 6061 T6 aluminum black anodize 4mm hex key required to loosen and tighten clamp 1/4 - 20 threads to connect common camera tripod adapters 2.25 inches wide x 7 inches long 7.7 oz

Saber Tactical UNIVERSAL PICATINNY TO PICATINNY RAIL ST0032 $79.99

UNIVERSAL PICATINNY TO PICATINNY RAIL -2 Inch Arca -4.5 Inch of picatinny -1/4-20 Threaded hole for camera tripod adapter

-7% sale

UTG UTG PRO | Keymod Picatinny Rail Section $13.95 $14.95

• Proudly Designed and Made in USA• Innovative Rail Edge Design Providing True Continuous Rail Slots When Connecting Multiple Rail Sections• Precision Machined from Aircraft Grade Aluminum Alloy with Anodizing• Includes Required Keymod Compatible Steel Locking Nuts, Steel Allen Screws and Allen Wrench for InstallationItem Number-8 Slot: MTURS04M-4 Slot: MTURS04S

-18% sale

UTG UTG Recon 360 TL Bipod | Picatinny $73.99 $89.99

UTG Recon 360 TL Bipod Features: • 3 Position Folding Legs and Lockable Leg Extensions Equipped with Nonslip Rubberized Foot Pads • Center Height Adjustable from 5.5"-7" | 7"-9" | 8"-12" • Fine-tunable Tension Adjustment Lever Applies the User Desired Amount of Tension to the Bipod's 360° Panning & 15° Forward, Rearward, Left, and Right Tilt • Low Profile Offset Picatinny Mount with Knurled Thumb Nut and Reinforced Steel Cross Bolt • Durable Aircraft Aluminum Construction Finished in a Matte Black Anodization

UTG | .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor Mount

UTG UTG | .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor Mount $12.99

• .22/Airgun Dovetail to Picatinny/Weaver Rail Adaptor • Innovative Rail Platform to Convert Most .22/Airgun Rails • Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base • Extremely Low Profile and Lightweight • Precision and Repeatable Alignment • Easy Installation with Most .22/Airgun Rails, 2PCs/Set • Removable Stop Pin for Extra Secure Installation

-7% sale

UTG UTG | Dovetail to Picatinny/Weaver Rail Adaptor Mount $14.99 $15.99

• Matte Black Anodized 6061-T6 Aluminum Construction • 3.94" Scalloped 9 Slot Picatinny Rail with 0.59" Saddle Height • Compatible with Most 9mm - 11mm Flat or Round Dovetail Rails • Full Length Locking Side Plate for a Secure and Repeatable Zero Hold • Optional Recoil Stop Pin Provides Additional Retention Against Bidirectional Recoil

-9% sale

UTG UTG | Over Bore Bipod | 7"-11" Center Height | Picatinny $169.99 $184.99

Quick Detachable Picatinny Base Designed to Mount onto the Top or Bottom Picatinny Rail of Handguards • Wide Open Angle Improves Stability • Matte Black Anodized Aircraft Aluminum Construction with Reinforced Steel Components • 3 Position Folding Legs Equipped with Rubberized Foot Pads • Lockable and Height Adjustable Legs Providing a Center Height from 7"-11" • 22° Panning and 44° Tension Adjustable Left and Right Tilt • Posi-lock Push Buttons Feature a Large Surface Area for Easier Use while Wearing Gloves ITEM NUMBER : TL-BPOB01-A

Black Arts Design Zeus Gen 2 | Barrel Band $49.99

The AEA Zeus .72 cal. has power but that power comes with a price…it is loud! DonnyFL took on quieting the thunderous roar of the Zeus with the Great Kami. The weight of the Great Kami at the end of the Zeus’s barrel causes barrel droop lowering the POI significantly. Black Arts Design stepped in to end this droop with the AEA Zeus Barrel Band.

Find anything you need

Fast Shipping

Quality Control

Mounting & Sighting

My Wishlist