Black Arts Design
Challenger Elite .35 Cal | Barrel Band
$52.00
The Black Arts Design AEA Challenger Elite Barrel Band (AKA Barrel Support Stabilizer) is designed to increase POI consistency and eliminate barrel droop. The split design allows install without removal of the factory muzzle break. Two large channels are built into the barrel band to accept TPU (a rubberized plastic) bushings. These bushings give way just enough to permit an easy install while still providing a tight fit and provide dampening characteristics. The three M3 screws provide a secure fitment. ***Fits only the .35 caliber Challenger Elite***
For the .45 | .50 | .510 caliber follow this link:
https://www.thepelletshop.com/products/challenger-elite-45-510-cal-barrel-band?_pos=3&_psq=elite%20&_ss=e&_v=1.0
Material
Carbon Fiber filled PETG – PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fiber increases flexural modulus (stiffness) well above standard PETG and further increases dimensional accuracy.
TPU – A rubberized plastic with dampening characteristics.
Features
Robust design built for strength and stiffness.
Two internal TPU (rubberized plastic) bushings are built into the barrel section. These bushings function as dampeners and provide an uncompromised fit.
Our split design allows installation without removing the muzzle break.
The cap head screws are secured using a captive nut for a clean appearance.
Bolstered ridge along circumference of Barrel Band increases flexural modulus (stiffness) and aesthetic appeal.
Installation Instructions: https://blackartsdesign.com/aea-challenger-elite-barrel-band-install/
The Pellet Shop
Mountain Metal | Huben GK1 Iron Sighted Shroud Kit
from $50.00
Mountain Metal GK1 Iron Sighted Kit gives customers the option of using the factory rear iron sight with our slightly larger fiber optic post or install the “above the block” picatinny for a red dot optic.
The shroud is a direct replacement for the factory barrel shroud with the only differences being the looks of course while also hiding the clocking pin.
All our products are 6061 aluminum, designed, machined, anodized, and etched in-house.
Rapid Air Worx
RAW | HM1000x Multi Shot Magazine
$71.95
$75.00
The RAW HM1000x Magazine lets you shoot for longer and spend less time reloading. Buy extras and load them before you start so you won't waste as much time when you're in the middle of shooting. This version is designed to load from the left hand side of the RAW HM1000x.
.22 Cal - 12 Rounds
.25 Cal - 12 Rounds
.30 Cal - 9 Rounds
Works in both RH and LH actions
Works with the RAW HM1000x
Please note: If you're using a large sidewheel or have a side parallax adjustment on your scope, we recommend using the right hand loading magazine.
Saber Tactical
MONO-POD FIELD VERSION ST0027
$149.99
If your gun already has the Saber Tactical buttstock or you plan to get one, this mono-pod is a great addition for field use. Even if the the shooting surface is not perfectly fat, the ball joint easily adjust to it.
Features:
Stainless Steel Precision lead screw allowing for smooth micro adjustments
Other metals are aluminum 6061 T6
Rubber bottom for extra grip
No need to loosen knobs before making adjustments
Includes adapter to attach to buttstock
Detach and attach mono-pod to adapter by sliding the mono-pod in.
Strong magnets help keep it secure
Ball joint near the base allowing you to cant
EDgun
EDgun | Leshiy 2 Air tank | 350CC / 300 bar carbon fiber
$299.99
EDgun Leshiy 2 Air tank - 350CC / 300 bar carbon fiber
In order to extend your shooting between refills, a bigger bottle is always the first thing you should consider. This 350CC carbon fiber bottle allows you to enjoy longer your sustained shooting with the Leshiy 2. 190mm long and 65mm in diameter, the bottle is not as large as to bother the shooter as well, keeping your whole kit backpack friendly!
Perfect design for Leshiy 2. With this 350cc bottle, the Leshiy 2 gains 260cc of additional air volume.
Installing the bottle onto the Leshiy 2
Degas gun - locate the bleed screw on the right side of the valve assembly
only crack the bleed; there is a detent ball under the grub screw
after 100% of the air is drained, tighten the screw - do not over tighten
Remove auxiliary air tank arm brace - 4mm hex wrench
place fill probe into the fill port - this keeps the fill assembly from spinning
Unscrew the auxiliary air tube
Unscrew air tube coupling - find the flat spots of the coupling and use a wrench
ensure there is an O-ring at the bottom of the male M18 threads (18X2.5 buna 70)
Thread on the new bottle hand tight
Fill Leshiy 2 -check for leaks
Karma Airguns
Karma Airguns | EQ Magazines
$45.00
Product description
Crafted from high-strength, lightweight materials, this magazine delivers extended shooting sessions without compromising feeding consistency. Whether you're on the bench or in the field, every round loads cleanly and cycles with confidence.
Available in multiple caliber-specific versions, each magazine is tuned for optimal alignment and minimal friction.
Features:
High-capacity design for extended shooting
CNC-machined internal components for smooth indexing
Reinforced polymer shell with sealed lid system
Precision-fit for the Karma EQ breech system
Available in .22, .25, and .30 calibers
Tool-less loading with clear lid for quick round count
FX
FX Crown | STX Barrel Kit (Smooth Twist X Superior)
from $299.99
*SHIPS WITH STX - Smooth Twist X Superior LINER*PROBE INCLUDED*MAGAZINES NOT INCLUDED
With this complete barrel kit (Smooth Twist X Superior barrel) for the FX crown you can easily change calibers. The kit consists of a barrel with fixed shroud, a STX Superior liner and a pellet probe. Available in several calibers.
Skout Airguns
Skout | Epoch Magazines
$99.99
Spare Magazines for your SKOUT EPOCH Airguns.
The best built magazine out there and built to last. Billet Aluminyum body and Stainless Steel Drive Spring. Force adjustbale spring driven tension. Magnetic latch, secure durable latching. Slug ready with extra depth for expanded slug use.
EDgun
EDgun | Leshiy 2 | Speed Loader
$194.99
The EDgun Leshiy 2 Speed Loader is a step forward in the evolution of speed loaders; unlike previous homemade versions, this model is CNC machined aluminum and hard anodized. The unit is then finished in PFTE, ensuring smooth operation while loading and locking the individual sections. With other 3D-printed models, the speedloaders required the user to remember what bay (cylinder) is loaded. It was common to double load a port while dropping the projectiles in the hole. On the EDgun Speed Loader, the pellets are held at the top for easy visualization. Once all eight ports are filled, a lever drops all the bullets at once. This unique process adds ease and speed to preloading the Speed Loader.
Hard-Anodized
PFTE Finish
All Aluminum Construction
Unique Loading Feature
Built-in Magnet
6 Magazine Capacity
Caliber Marking
EDgun Quality
Saber Tactical
FX Panthera/Dynamic Compact Arca Rail ST0073
$145.00
PRODUCT DESCRIPTION
Crafted from premium 6061 aluminum, this low profile arca rail enhances the aesthetic of the gun as well as the comfort when shooting off hand. The rail also has a 1/4-20 threaded hole for camera tripod adapters. Underneath the rail are MLok slots to equip the gun with different accessories.
Features:
6061 T6 aluminum
black anodize with lasered logo
threaded nylon tipped grub screw to help rail flex
Extends to the end of a 300cc FX bottle
UTG
UTG PRO | Keymod Picatinny Rail Section
$13.95
$14.95
• Proudly Designed and Made in USA• Innovative Rail Edge Design Providing True Continuous Rail Slots When Connecting Multiple Rail Sections• Precision Machined from Aircraft Grade Aluminum Alloy with Anodizing• Includes Required Keymod Compatible Steel Locking Nuts, Steel Allen Screws and Allen Wrench for InstallationItem Number-8 Slot: MTURS04M-4 Slot: MTURS04S
Saber Tactical
Saber Tactical | Karma EQ Bottle Adapter Kit ST0100
$59.99
Key Features:
Carbon Fiber Bottle Compatibility – Easily install 480cc, 580cc, or even 700cc carbon fiber bottles to reduce weight while maintaining excellent shot capacity.
Durable Construction – Precision-machined body with included O-rings, X-washers, and a thread protector for long-lasting performance.
Simple Installation – Requires only basic tools (open-end wrenches, Allen key, Teflon tape) and can be done at home with a degassed rifle.
Flexible Fill Options – Choose your Foster fitting orientation for easy access to the fill port.
Safety Considerations – When using a 250 BAR bottle, your rifle will be limited to 250 BAR (≈3600 PSI) fill pressure. Always match your fill pressure to the bottle’s rating.
What’s Included:
Main adapter body with four-port design
Thread protector collar
O-rings and X-washers (with spares)
Foster fitting plunger assembly
With just a few wrench turns and proper setup, you can transform your Karma EQ into a lighter, more balanced rifle. Whether you want a compact 300cc bottle for ultra-light handling or a larger 700cc bottle for extended shot strings, this kit makes it possible.
The Pellet Shop
Mountain Metal | AEA Zeus Gen 2 Tactical Chassis
from $99.95
Mountain Metal is proud to present the Tactical Chassis Kit for the AEA Zeus. This beautiful package provides owners of the most powerful production airgun on the planet a customizable build previously unavailable until now.
The kit was designed to provide enhanced shooting ergonomics by utilizing the vast array of AR stocks, AR grips, and other firearm accessories.
The comb, grip, trigger placement, butt pad, bipod, and balance point positions can all be varied depending on your personal accessory choices.
Mountain Metal performs all design work, billet aluminum machining, anodizing, and laser etching in-house for complete quality control of our products.
Kit includes chassis, bipod rail with picatinny, barrel brace, self-timing muzzle brake, buffer tube, indexing plate, castle nut and attaching hardware.
Owners will need to obtain separately an extended female foster quick disconnect, AR stock, AR grip, optics, bipod, etc.
-BUFFER TUBE
-STOCK
-AR15 GRIP
Hatsan
Hatsan | Jet Magazines
$14.99
$19.99
Hatsan Jet Magazine
Compatible with Hatsan Jet I and Hatsan Jet II
.177 Cal - 8 Round capacity
.22 Cal - 7 Round capacity
.25 Cal - 6 Round capacity
Saber Tactical
MONO-POD BENCH VERSION ST0026
$249.99
If your gun already has the Saber Tactical buttstock or you plan to get one, this mono-pod is a great addition to it for bench competition. Very rigid and making horizontal/vertical adjustments is butter smooth!
Features:
Stainless Steel Precision lead screw allowing for smooth micro adjustments
Other metals are aluminum 6061 T6
Rubber bottom for extra grip
No need to loosen knobs before making adjustments
Includes adapter to attach to buttstock
Detach and attach mono-pod to adapter by sliding the mono-pod in.
Strong magnets help keep it secure
Ball joint near the base allowing you to cant