Black Arts Design
Air Venturi Avenger Bullpup Barrel Band
$30.00
The Gen2 Black Arts Design Barrel Band is designed to reduce the POI shifts inherent in the Air Venturi Avenger Bullpup and tighten groups. The Black Arts Design Barrel Band adds stability to the Avenger Bullpup that is not present in factory configuration. We highly recommend the DonnyFL Avenger Extender 1/2×20 Adapter be paired with our Barrel Band. This package is available here.
Material
Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fibers increases flexural modulus (stiffness) well above standard PETG.
TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant to abrasion.
Features
The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation.
TPU has rubber like characteristics adding dampening qualities to our barrel band.
No grub screws! The lower section clamps securely with a single M3 alloy steel screw and nut. The nut is held captive within an internal slot providing a secure hold while maintaining a clean appearance.
Bolstered design along the circumference increases flexural modulus (stiffness) and aesthetic appeal.
EDgun
EDgun | Leshiy 2 | Aluminum Handguard
from $179.99
The Aluminum handguard comes in 3 sizes and has a full Picatinny rail on the top and bottom with M-Lok licensed slots on the side.
6 inch (150MM) compatible with the 250 barrel and 350 barrel in some configurations
10 inch (250 MM) compatible with 350 and 450 mm barrel in some configurations
15 inch (400 MM) compatible with 450 and 650 mm barrel in some configurations
Included with handguard
Mounting plate
Longer Locking pin
Screws
Airmarksman
Airmarksman Premium Microbore Hose
from $99.99
AirMarksman Microbore Hose with Pre‑Installed Fittings – 3ft or 6ft
Upgrade your setup with a durable microbore hose designed for reliability and ease of use. hassle-free experience every time.
Each hose comes pre-fitted with one standard quick-disconnect fitting and one extended quick-disconnect fitting. The extended fitting makes detaching from the FX Impact or similar airguns significantly easier, saving time and effort.
Available in 3ft or 6ft lengths, perfect for any shooting setup.
DonnyFL
FX Wildcat Mag Holder M27
$25.00
With Matt247365 from Airgun Nation's blessing, I am happy to offer these easy to install Wildcat mag holders. Compatible with .177 .22 .25 and .30 caliber. Your magazine clicks securely into the Mag holder using it’s own ball bearing and can rotate for easy loading with one hand while on the gun. As many as 4 Magholders can fit on the Wildcat at one time. You can mount 1, 2, 3 or 4 in a variety of configurations facing either to the front or to the rear and on either side or on both sides.
Features:
Made of 6061 T6 aluminum
black anodize
CNC machined
Uses 2.5 mm Hex key
Skout Airguns
SKOUT Airguns | ARCA-Swiss Rail
$250.00
At SKOUT® Airguns they pride themselves on being able to react to their customer demands for features and accessories.
Shooters wanted a versatile attachment rail for the EPOCH platform that let them attach weight, m-lock accessories and ARCA-Swiss locking mounts to their rifle.
After extensive testing in house, in the field and in competition SKOUT is now excited to offer the new SKOUT® ARCA-Swiss Rail for the EPOCH® air rifle.
Single M-Lock Slot Mounting
ARCA-SWISS RAIL
3 M-Lock Slots on the bottom of rail
Black Arts Design
Carbon Fiber 52mm Tri-Rail | Black Arts Design
$149.99
The 52mm Carbon Fiber Tri-Rail is an accessory mounting system with unparalleled stability and versatility in an incredibly lightweight package. Weighing in at an amazing 1.95 oz. (56 grams), without sacrificing any strength, it provides the versatility to be adapted to any shooting situation from bench to field thanks to the use of the M-Lok system. From picatinny to swiss- arca, flashlights to sling swivels the choice is yours. The carbon fiber clamping body measures under .7mm in thickness ensuring it will not put upward pressure on your barrel even on the Challenger Pro and Zeus models. Only compatible with airguns utilizing a 52mm air tube
Materialo Clamp Body - Aerospace grade carbon fibero Clamping base components - hard anodized 6061-T6 aluminum
Featureso Rock Solid attachment to Air Tubeo Low Profile Designo M-Lok slots at 3, 6, and 9 O'clock positions providing limitless options foraccessory attachmentso Lightweight - 1.95 Ounces (56 grams)o Flat surfaces at 3, 6, and 9 O'clock -Provides flat stable faces for use with saddlemounts
- 5 Slot Picatinny Rail with QD sling mount. Hard anodized6061-T6 Aluminum
Karma Airguns
Karma Airguns | RP (Red Panda) Magazines
$65.00
Magazines for the Karma Airguns Red Panda Models. Made of CNC aluminum.
Shot Count.22 Cal = 18 Rounds.25 Cal = 16 Rounds.30 Cal = 13 Rounds.35 Cal = 11 Rounds
Eagle Vision
Eagle Vision | FX Magazine | Dreamline | Maverick | Crown | Bobcat MK3 (PELLETS)
$74.99
22 (5.5mm) – 18 shot (with magnetic lid)
** PELLETS ONLY- NOT FOR SLUGS**
We’ve added some improvements such as:
Easier to load
Holds pellets more securely
Smoother rotation
Numbered magazine shot count
Maximum Pellet length
11.5mm flat head
12mm dome head
Magazine height: 49mm
Fits the following rifles:
Dreamline (all models)
Maverick
Crown
Bobcat MK3
***ALL SALES ARE FINAL ON THESE MAGS***
Saber Tactical
Saber Tactical | Fx Impact Fishing Kit | ST0051
$224.99
The Saber Tactical FX Impact Fishing Conversion Kit is a must-have accessory for serious air rifle enthusiasts. Designed specifically for the Fx Impact PCP air rifle, this conversion kit allows you to transform your air rifle into a powerful fishing tool.
With its ease of use and versatility, the FX Impact Fishing Conversion Kit is the perfect accessory for anyone who loves air rifles and fishing. Be sure to check out the Saber Tactical FX Impact Fishing Conversion Kit today!
Saber Tactical
FX Impact M4 Quick Disconnect Sling Adapter ST0103
$20.00
PRODUCT DESCRIPTION
Easily attach this adapter to the rear of your FX Impact M4 to use with a quick detach (sold separately) or straps (sold separately) for your sling.
Not compatible with previous FX Impacts
Key Features:
Quick and Easy Attachment: Designed for fast and secure attachment to the rear of your FX Impact M4.
High-Quality Construction: Made of 6061 Aluminum for durability and strength.
Sleek Finish: Black anodized finish for a sleek look and additional protection.
AirMarksman
AirMarksman | Quickie Fill System
$174.99
Airmarksman Quickie – Fast, Efficient, and Built for Everyday Airgunners
The Airmarksman Quickie is designed for shooters who want speed, efficiency, and reliability in every fill. Engineered for quick and easy operation, this compact fill tool eliminates the hassle of de-gassing your hose after each use—saving time, preserving air, and reducing wear on your system.
Its ergonomic lever provides a smooth, comfortable feel, allowing effortless control with every fill. No adjustments are required—just connect and go. With the ability to precisely meter airflow, the Quickie gives you the control you need for clean, consistent fills on any PCP setup.
Built to handle demanding use, the Airmarksman Quickie is rated to 310 bar (4500 PSI) and includes an extended quick disconnect for improved reach and compatibility. It’s fully rebuildable, ensuring long-term value, and backed by a 1-year warranty covering manufacturing defects for peace of mind.
Streamlined, durable, and purpose-built—the Airmarksman Quickie is the ultimate upgrade for your airgun filling routine.
MADE IN THE USA
Athlon Optics
Athlon | Laser Range Finder | Midas G2 1 Mile
$289.99
$362.49
FULLY MULTI-COATED Athlon Optic’s fully multi-coated glass gives you better light transmission with optimum brightness and true color across the entire light spectrum.
RAINPROOF Don’t let unexpected showers, slow you down. While not submersible, rainproof optics will shed water in the harshest conditions, so you can push forward.
RUBBER ARMOR Rubber Armor is applied to the chassis, giving additional protection and a durable, secure, non-slip soft texture grip for any weather condition
All Features:
FULLY MULTI-COATED LENSES
NITOGREN PURGING
OLED ILLUMINATING DISPLAY
5 ILLUMINATION SETTINGS
RAINPROOF
RUBBER ARMOR
DIOPTER ADJUSTMENT
ANGLE COMPENSATION MODE
LINE OF SIGHT MODE
SCAN MODE
HUNTING AND GOLF MODE
DUAL UNITS OF MEASUREMENT OF DISTANCE (M/Y)
Ranging Reflective:
5 - 1760 y
FOV ANGULAR:
6 Degrees
ACCURACY:
+/- .5 y
BATTERY:
CR2-3V
Skout Airguns
Skout | Epoch CARBON BARREL SHROUD
from $90.00
Skout EPOCH CARBON BARREL SHROUDThis kit is for 1 carbon barrel shroud only, available in 25" or 35"When going from 25" to 35" barrels you would need 1 CARBON BARREL SHROUD in the appropriate length. This item works with the BARREL INSERT KIT found HERE
Skout Airguns
Skout | Epoch BARREL INSERT KIT
from $100.00
Skout EPOCH Barrel insert kitThis kit is for the barrel inserts onlyWhen going from 25" to 35" barrels you would need the 25" or 35" Carbon Barrel Shroud also found HERE