Accessories, Bi-Pods & Tri-Pods

Black Arts Design Air Venturi Avenger Barrel Band $40.00

The Gen2 Black Arts Design Barrel Band System is designed to reduce the POI shifts inherent in the Air Venturi Avenger and tighten its groups. We developed a 2-component system that removes the main problem, the factory barrel band. The Air Venturi Avenger factory barrel band ties the forend of the stock directly to the barrel. Any pressure applied to the forend is fed directly to the barrel via the factory barrel band. Our 2-component system divorces the forend and lower air tube from the barrel. This is accomplished through our Forend Bracket which secures the forend to ONLY the lower air tube. The Forend Bracket does not contact the upper air tube or barrel shroud. This ends the intimate relationship between the stock forend and barrel. Our Barrel Band then ties ONLY the upper air tube and barrel providing stability. These 2 components will tighten groups and drastically reduce the seemingly random POI shifts. We highly recommend the DonnyFL Avenger Extender 1/2×20 Adapter be paired with our 2 component Barrel Band System. Material Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fibers increases flexural modulus (stiffness) well above standard PETG. TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant to abrasion. Features The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation. TPU has rubber like characteristics adding dampening qualities to our barrel band. No grub screws! The lower section clamps securely with a single M3 alloy steel screw and nut. The nut is held captive within an internal slot providing a secure hold while maintaining a clean appearance. Bolstered design along the circumference increases flexural modulus (stiffness) and aesthetic appeal. Installation Instructions Gen2: https://blackartsdesign.com/avenger-gen2-barrel-band-system-installation/ Installation Instructions (systems sold prior to 04/08/22): https://blackartsdesign.com/air-venturi-avenger-barrel-band-system-install/

Black Arts Design Challenger Pro | Barrel Band $49.99

The Black Arts Design Barrel Band, AKA Barrel Support Stabilizer, reduces the likelihood of POI shifts from bumps to the barrel and ends barrel droop induced by moderators. Our Gen2 barrel shroud section houses two TPU bushings. These bushings allow for a very snug fit but still allow a no hassle installation. The lower section clamps to the air tube with two M3 screws providing substantial resistance to movement. Material: - Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, andhigh dimensional accuracy. The addition of carbon fibers increases flexural modulus(stiffness) well above standard PETG.- TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant toabrasion. Features: -The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation.- TPU has rubber like characteristics adding dampening qualities to our barrel band.- No grub screws! The lower section clamps securely with two alloy steel screws and nuts.Nuts are held captive within internal slots providing a secure hold while maintaining aclean appearance.- Bolstered design along the circumference increases flexural modulus (stiffness) andaesthetic appeal.

FX FX Impact | STX Slug Tensioned Barrel Kit from $349.99

*SHIPS WITH HEAVY SUPERIOR SLUG LINER The advancement of slug shooting and the enhancements to the FX Impact have shooters wanting to use heavier slugs at faster speeds. This requires a more rigid barrel to handle the additional energy and vibrations created by these projectiles. The new FX Tensioned Barrel System adds the firmness needed to let you reach the potential of the FX Impact with heavy slugs, all while maintaining the extreme accuracy everyone expects from an FX Airgun. Conceived and created by the famed airgun engineer Hein Frommann, who perfected it through a global collaboration with Johan & Fredrik Axelsson (Sweden), Matt Dubber & Roelf Vorster (South Africa) & Ernest Rowe (USA). The result is really showing off the brain trust at FX Airguns. From a barrel harmonics perspective, the tensioner system reduces the amplitude of barrel movement which results in better accuracy and more consistency. Secondarily the rigidness of the barrel becomes more temperature stable and will further hold zero regardless of conditions and to handle knocks to the barrel during hunting, PRS courses, etc. 800mm Barrel To push the boundaries of what small bore slugs can do, FX is introducing an 800mm Slug Tensioned Barrel for the FX Impact. This barrel will allow the FX Impact to shoot heavier slugs at the speeds needed to create a higher BC which will allow the Impact to shoot at further distances. All FX Tensioned Barrels allow the shooter to use a moderator. 1/2” UNF threads come standard on all but the .35 Calibers, which use an M18x1 thread. When installing the tension nut, tighten until the nut is flush with the carbon fiber housing, then tighten an additional quarter turn. Additional torque is not needed. Note: The tensioned barrel is not really needed for those shooting pellets as pellets use less pressure and produces less movement to the barrel (except for the .35 caliber that does benefit from the tensioner). *In order to get the advertised velocities (40gr. slugs @ 1040 fps) you will need an 800mm Impact with Power Block, 720 Power Plenum, Pin Probe & Tungsten Hammer Weight.

FX FX Impact Slug Power Kit $44.99

*WILL ONLY WORK WITH .22 & .25 CALIBER* To further the Impact's ability with slugs and other heavy projectiles, FX Airguns is pleased to announce the release of the FX Impact Slug Power Kit. This simple kit brings some key modifications to the rifle to maximize the power and accuracy potential of the Impact, especially when using slugs. Velocity increases are achieved in large part to the addition of two hammer weight spacers that placed in front of the return spring on the hammer weight guide. This allows for more compression on the hammer spring as well as adding more weight to the overall hammer. Working in harmony with this modification is a lighter valve return spring. This lighter spring allows the valve to stay open slightly longer which allows more air through to propel heavier projectiles like airgun slugs. Also included in the FX Impact Slug Power Kit is a cleverly designed pin probe. This probe was developed in collaboration with World Champion 25 Meter WRABF champion Hein Fromann, his fellow South African Matt Dubber, and Johan Axelsson from FX Airguns. The result is an adjustable pin probe that is seating depth adjustable for your projectile (which aids in accuracy). This probe also increases the air flow in the barrel due to the pin probe design. The kit comes with a .22 caliber pin probe as well as a sleeve that slides over to create a .25 caliber pin probe. INSTALLATION INSTRUCTIONAL VIDEO: https://www.youtube.com/watch?v=XqB3u4fW2Y0

FX FX Maverick/Wildcat Slug Power Kit $39.99

* .22 / .25 & .30 caliber * FX Wildcat MKIII/Maverick Slug Power Kit Adjustable pin probe for .22 caliber, with .25 & .30 caliber sleeve Heavier hammer Compatible with FX Wildcat MKIII and FX Maverick This Slug Power Kit will increase the power of the FX Wildcat MKIII and FX Maverick when shooting slugs and allow custom tuning with a variable-length pellet probe that adjusts via an Allen bolt in the rear of the probe. The pin probe is compatible with .22 caliber versions of these air rifles, and .25 & .30 caliber versions with the included sleeve and O-rings, and allows fine-tuning that facilitates maximum accuracy. The kit also includes a heavier hammer that will increase the power and velocity of each shot to give shooters even more performance than the base airgun provides, with possible velocity increases of up to 98 FPS.

Saber Tactical FX MAVERICK TRS RAIL from $239.99

Saber Tactical Top Tail Support (TRS) Features: Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting. M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights. Built in 20 MOA, giving your scope more elevation for long range shooting. Has a Delrin shroud clamp to prevent shroud droop. It minimizes or eliminates any point of impact changes when switching suppressors. Weight = .8 lb Note* Highly recommend pairing with the Maverick Cheek riser ST0046

FX MAVERICK / WILDCAT | Cheek Riser ST0046

Saber Tactical FX MAVERICK / WILDCAT | Cheek Riser ST0046 $49.99

Features: Cheek riser is made of delrin with Aluminum mounting plate Allows a little over 18mm of vertical adjustment. Ambidextrous for left and right hand shooters Weight = 3.6oz Note* Highly recommend pairing with the standard/compact FX Maverick TRS rail

Saber Tactical | AR STYLE GRIP WITH AMBIDEXTROUS THUMB REST - ST0049

Saber Tactical Saber Tactical | AR STYLE GRIP WITH AMBIDEXTROUS THUMB REST - ST0049 $65.00

For competitive shooters who do not like to wrap your thumb around the grip, this grip has a thumb rest that can be positioned on either side. You can also adjust the angle to your preference. Note* The first shipment of grips are compatible with FX Impacts and most AR style grips. We've found that the FX Maverick has a thicker adapter and will not be compatible. We mark the first batch with a Yellow round sticker on the package. Features: 6061 T6 aluminum Black anodized Skeletonize to reduce weight Ambidextrous thumb rest Weighs 6.0 oz

Saber Tactical FX IMPACT MAGNETIC ARM LOCK - ST0048 $35.00

This magnetic arm lock help keep the cocking arm open. Useful during competition when you are required to keep the bolt open. Features: 6061 T6 Aluminum Black anodized Stainless steel screw Easy install Weigh only 1oz Installation instruction: Highly recommend you remove the bottle Fire the gun to remove any air in the plenum Unscrew bolt in front of plenum. See picture 1 Install Magnetic Arm Lock

Saber Tactical Saber Tactical | DELRIN BUSHING FOR TRS CLAMP ST0040 $5.00

This bushing goes inside the TRS clamp allowing you to better stabilize the FX carbon fiber sleeve. This does not include the clamp. Features: Made of black delrin.Recommended with 800mm Carbon Fiber tension kits

FX IMPACT QUICK DISCONNECT SLING ADAPTER ST0042

Saber Tactical FX IMPACT QUICK DISCONNECT SLING ADAPTER ST0042 $20.00

Easily attach this to the rear of your FX Impact M3 to use with a quick detach or straps for your sling. DOES NOT WORK ON THE M4. Features: Made of hardened steel Black anodize

DonnyFL Sam Yang .50 cal Dragon Claw A47 $50.00

Product description Sam Yangs are known to output some crazy power. This adapter with M18x1 threads will allow you to screw on the Emperor v3. You might have need the Extender as well if Silence is a Priority!

FX Impact | STX Barrel Kit (Smooth Twist X Superior)

FX FX Impact | STX Barrel Kit (Smooth Twist X Superior) from $299.99

*SHIPS WITH STX - Smooth Twist X Superior LINER*PROBE INCLUDED*MAGAZINES NOT INCLUDED The Smooth Twist X Barrel is a fully rifled barrel liner. All barrel kits now ship with the STX Superior Liner. FX’s proprietary process of imparting the inner rifling of the barrel from the outside of the steel tubing leaves a flawlessly smooth finished rifling inside the bore. This in turn increases the accuracy of the projectile drastically and makes this a highly coveted barrel for any air gun enthusiast. These barrel kits will include the barrel, shroud & probe for the selected caliber. This barrel is housed in the Interchangeable Barrel system allowing the shooter to swap and change barrel liners of various twist rates, bore specifications and more; all to tailor the barrel to different projectile sizes. The standard barrel length is 600mm. 700mm Smooth Twist X-Barrel with Superior Liner With the FX 700mm Smooth Twist X barrel, comes an exciting upgrade from the standard X Barrel. It is 100mm longer and provides higher accuracy due to its more efficient air consumption and stabilizing power imparted by the length of the barrel (available in both .25 and .30 caliber). The 700mm barrel can also be utilized to extract more power from the Impact for those using it in a hunting application. You can expect to gain up to 10% more muzzle energy from the barrel when tuned properly over the shorter standard 600mm X barrel. Much like the standard FX Smooth Twist X Barrel, the 700mm barrel is housed in the FX Interchangeable liner system which allows additional barrel liners of varying twist rates and other specifications to be exchanged for different projectiles. For those who wants to experience more power from their FX Impact or who are looking for an extra edge in their competitive shooting, we highly recommend the upgrade to the unrivaled FX 700mm Smooth Twist X Barrel.

FX Wildcat/Maverick | STX Barrel Kit (Smooth Twist X Superior)

FX FX Wildcat/Maverick | STX Barrel Kit (Smooth Twist X Superior) from $299.99

*SHIPS WITH STX - Smooth Twist X Superior LINER*PROBE INCLUDED*MAGAZINES NOT INCLUDED With this complete barrel kit (Smooth Twist X Superior barrel) for the FX Wildcat MKIII and the FX Maverick you can easily change calibers. The kit consists of a barrel with fixed shroud, a STX Superior liner and a pellet probe. Available in several calibers.

DonnyFL Hatsan Blitz M18 X 1 Adapter A117 $39.99

This adapter allows you to screw on an airgun suppressor with M18x1 threads. ***New Improved For More Air Flow.*** I recommend going with the Ronin with this gun. I have it installed on my personal gun and it works flawlessly. However, results may vary and might need modification to work in semi auto mode. This gun is similar to the Bullmaster and others have been able to fix the issue by replacing the spring. Go to your hardware store and look for a lighter spring. I got mine from Ace hardware and it fixed the magazine indexing issue. Features: Compatible up to .30 caliber Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

Find anything you need

Fast Shipping

Quality Control

Mounting & Sighting