Products – Page 19 – The Pellet Shop

FX Airguns FX Dynamic VP Standard | 600mm $1,568.44 $1,650.99

FX Dynamic VP 600 Features: 400cc rear aluminum bottle Reversible sidelever 1/2 x 20 male threads at the end of the shroud 156cc Magnum XL Plenum High power, short impulse valve Dynamic Block Over the barrel Dynamic Plenum design Quick Tune System Fill pressure: 232 bar/3,365 psi Max. energy (600)**: 82 fpe (.22) | 91 fpe (.25) | 130 fpe (.30) | 173 fpe (.35) Magazine capacity: 18 (.22) | 16 (.25) | 13 (.30) | 10 (.35) Standard Side Shot magazine with deeper .51" lid for longer slugs Superior Heavy Smooth Twist X barrel Superior Slug liner Adjustable hammer tension power wheel AMP MKII (Adjustable Match Precision) regulator 2 stage adjustable match trigger Dual angled manometers: bottle and regulated pressure Picatinny scope rail with 20 MOA cant Ergonomic textured grip Molded tank cover/cheek rest w/ventilated rubber buttpad Foster Quick Disconnect fill port Barrel length: 600mm/23.6" Overall length: 43.5" Weight: 7.5 lbs. ** - Using: 34gr pellets at 1040 fps (.22) | 43.5gr slug at 970 fps (.25) | 64gr slug at 1020 fps (.30) | 93gr slug at 915 fps (.35)

FX FX Halo | .30 Cal | 46 Grains | 154 Ct $29.99

shipping now!! The FX Halo bridges the gap between traditional pellets and high-performance slugs — delivering the best of both worlds: • Easy to tune — retains the familiar weight and tuning behavior of a traditional diabolo pellet • Superior ballistics — slug-based profile with a much higher ballistic coefficient for exceptional wind resistance and long-range accuracy • Massive expansion — large hollow point design maximizes energy transfer and terminal performance on impact • Universal compatibility — works flawlessly with existing 30cal Superior and Superior Heavy liners, with no special modifications needed • Supreme consistency — manufactured in-house with precision machinery to guarantee accuracy and reliability with every single shot Manufacturer: FX Airguns Caliber: .30 cal Ammo Weight: 46 gr SKU: 31008C NOTE: All sales on ammo are final.

Sold out

FX FX Hybrid Slugs | .22 Cal | 22 Grains | 100 Ct $13.99

Manufacturer: FX Airguns Caliber: .22 cal Ammo Type: Slugs Ammo Weight: 22.0 gr Pellet Shape: Hollowpoint Pellet Quantity: 100 SKU: XHS917411 NOTE: All sales on ammo are final.

FX FX Hybrid Slugs | .25 Cal | 26 Grains | 100 Ct $14.99

Manufacturer: FX Airguns Caliber: .25 cal Ammo Type: Slugs Ammo Weight: 26.0 gr Pellet Shape: Hollowpoint Pellet Quantity: 100 SKU: FXHS917428 NOTE: All sales on ammo are final.

Sold out

FX FX Hybrid Slugs | .30 Cal | 44.5 Grains | 100 Ct $17.49

Manufacturer: FX Airguns Caliber: .30 cal Ammo Type: Slugs Ammo Weight: 44.5 gr Pellet Shape: Hollowpoint Pellet Quantity: 100 SKU: FXHS917466 NOTE: All sales on ammo are final.

Sold out

FX FX Hybrid Slugs | .35 Cal | 68.2 Grains | 100 Ct $17.99

Manufacturer: FX Airguns Caliber: .35 cal Ammo Type: Slugs Ammo Weight: 68.2 gr Pellet Shape: Hollowpoint Pellet Quantity: 100 SKU: FXHS917473 NOTE: All sales on ammo are final.

Saber Tactical FX IMPACT ARCA RAIL 2 ST0022 $159.99

Similar to the first Arca Rail, however this one has T slots on the both sides allowing you to attach shooting accessories such as flashlight and laser. Edges are very smooth and makes it very comfortable to shoot offhand. Features: Aluminum 6061 T6 Hard black anodize Arca Swiss Rail underneath with Picatinny at the end Also has 1/4 x 20 threads for common camera tripod attachment Includes an extended dust fill cap

Saber Tactical FX IMPACT COMPACT ARCA RAIL ST0023 $149.99

This compact arca swiss rail is great for the FX Impact with the short 300cc bottle. Makes the gun very comfortable to shoot off hand and allows you to attach your favorite shooting accessories such as a flashlight or laser pointer. Features: Aluminum 6061 T6 Hard black anodized Arca swiss rail with picatinny at the end 1/4 x 20 threads for common photography tripod adapter

Saber Tactical FX IMPACT LOW PROFILE 3 FULL ARCA SWISS RAIL from $154.99

***Also works for the Impact m4*** For those that do not need picatinny slots at the end of their rail, this one has full arca. Ideal for the 580cc and 700cc bottles. Features: MLok slots at the bottom and on both sides of the rail for add-on accessories. Low profile, hugs closer to the bottle Sling QD slots on both sides 6061 T6 Alluminum Black anodize From start of trigger guard until the end of rail is 15.75 inches x 2.75 inches wide Includes an extended dust fill cap

Saber Tactical FX Impact M4 Quick Disconnect Sling Adapter ST0103 $20.00

PRODUCT DESCRIPTION Easily attach this adapter to the rear of your FX Impact M4 to use with a quick detach (sold separately) or straps (sold separately) for your sling. Not compatible with previous FX Impacts Key Features: Quick and Easy Attachment: Designed for fast and secure attachment to the rear of your FX Impact M4. High-Quality Construction: Made of 6061 Aluminum for durability and strength. Sleek Finish: Black anodized finish for a sleek look and additional protection.

FX Airguns FX Impact M4 | .35 Caliber from $2,295.00

The FX Impact M4 .35 Caliber Airgun comes in either black or copper with an 500mm - 800mm barrel length. The high-capacity magazines on the FX Impact M4 have been redesigned and are now made from a stronger material with a new internal mechanism, ensuring that the inner drum rotates smoothly even when fully loaded with some of the heaviest slugs on the market. The single regulator design is standard on the M4 and features FX’s new brass piston regulator. It is stronger, has faster refresh rates, is more consistent, and can easily handle higher bottle pressures with a max working pressure of 170bar. When it comes to design, the Impact M4 has been given a new design without straying too far from the original iconic look. This has been accomplished through several small, yet important improvements throughout the entire platform: subtle new lines, cutouts for easy access to certain parts, and angles to tie it all together and make the M4 both more practical and pleasing to the eye. To further enhance both performance and the shooting experience of the FX Impact M4, you can expect improvement on the overall rigidity thanks to the design of a new top plate. It is significantly thicker and stronger, bringing more rigidity throughout the entire platform. The M4’s redesigned picatinny optics rail mounts to an 11mm dovetail rail machined into the factory backbone. This eliminates alignment issues when removing and reinstalling the optics rail. The Picatinny optics rail can also be loosened so it can slide along the 11mm dovetail rail and be re-clamped closer to the shooter, allowing the shooter to fine-tune eye relief for their chosen optic. The new quick set trigger system was one of the first major upgrades added to the M4. At the foundation of each great shot taken is the trigger. The quick set trigger on the M4 allows for extensive adjustability based on the shooting scenario: adjust from just the right amount of pull for a hunting application to a match grade trigger that is light, clean, and crisp! With the new quick set trigger unit and top rail added, FX also improved the overall feel and comfort of shooting the Impact with the new FX grip. The design of the new grip is more defined and comfortable to grip onto, with just the right amount of palm swell and beaver tail to enhance comfort while shooting and giving you a firm hold on your Impact M4. COLORSBlackCopper CALIBERS / MAGAZINE CAPACITY.35 / 18 shots BARREL LENGTH / OVERALL LENGTHExtended: 800mm / 1120mm (44”)

FX Airguns FX Impact M4 | Compact $2,305.99

NEW WITH THE FX IMPACT M4 COMPACT The FX Impact M4 Compact comes in either black or copper and is available in .177, .22, .25, and .30 calibers. It has a 500mm barrel length and overall length of 640mm (or 25″). The high-capacity magazines on the FX Impact M4 have been redesigned and are now made from a stronger material with a new internal mechanism, ensuring that the inner drum rotates smoothly even when fully loaded with some of the heaviest slugs on the market. The single regulator design is standard on the M4 and features FX’s new brass piston regulator. It is stronger, has faster refresh rates, is more consistent, and can easily handle higher bottle pressures with a max working pressure of 170bar. When it comes to design, the Impact M4 has been given a new design without straying too far from the original iconic look. This has been accomplished through several small, yet important improvements throughout the entire platform: subtle new lines, cutouts for easy access to certain parts, and angles to tie it all together and make the M4 both more practical and pleasing to the eye. To further enhance both performance and the shooting experience of the FX Impact M4, you can expect improvement on the overall rigidity thanks to the design of a new top plate. It is significantly thicker and stronger, bringing more rigidity throughout the entire platform. The M4’s redesigned picatinny optics rail mounts to an 11mm dovetail rail machined into the factory backbone. This eliminates alignment issues when removing and reinstalling the optics rail. The Picatinny optics rail can also be loosened so it can slide along the 11mm dovetail rail and be re-clamped closer to the shooter, allowing the shooter to fine-tune eye relief for their chosen optic. The new quick set trigger system was one of the first major upgrades added to the M4. At the foundation of each great shot taken is the trigger. The quick set trigger on the M4 allows for extensive adjustability based on the shooting scenario: adjust from just the right amount of pull for a hunting application to a match grade trigger that is light, clean, and crisp! With the new quick set trigger unit and top rail added, FX also improved the overall feel and comfort of shooting the Impact with the new FX grip. The design of the new grip is more defined and comfortable to grip onto, with just the right amount of palm swell and beaver tail to enhance comfort while shooting and giving you a firm hold on your Impact M4. The FX Impact M4 is available in a variety of calibers, sizes, and colors: COLORSBlackCopper CALIBERS / MAGAZINE CAPACITY.177 / 34 shots.22 / 28 shots.25 / 25 shots.30 / 23 shots

FX Airguns FX Impact M4 | Sniper $2,445.99

NEW WITH THE FX IMPACT M4 SNIPER The FX Impact M4 Sniper comes in either black or copper and is available in .177, .22, .25, and .30 calibers. It has a barrel length of 700mm and an overall length of 1000mm (or 39″.) The high-capacity magazines on the FX Impact M4 have been redesigned and are now made from a stronger material with a new internal mechanism, ensuring that the inner drum rotates smoothly even when fully loaded with some of the heaviest slugs on the market. The single regulator design is standard on the M4 and features FX’s new brass piston regulator. It is stronger, has faster refresh rates, is more consistent, and can easily handle higher bottle pressures with a max working pressure of 170bar. When it comes to design, the Impact M4 has been given a new design without straying too far from the original iconic look. This has been accomplished through several small, yet important improvements throughout the entire platform: subtle new lines, cutouts for easy access to certain parts, and angles to tie it all together and make the M4 both more practical and pleasing to the eye. To further enhance both performance and the shooting experience of the FX Impact M4, you can expect improvement on the overall rigidity thanks to the design of a new top plate. It is significantly thicker and stronger, bringing more rigidity throughout the entire platform. The M4’s redesigned picatinny optics rail mounts to an 11mm dovetail rail machined into the factory backbone. This eliminates alignment issues when removing and reinstalling the optics rail. The Picatinny optics rail can also be loosened so it can slide along the 11mm dovetail rail and be re-clamped closer to the shooter, allowing the shooter to fine-tune eye relief for their chosen optic. The new quick set trigger system was one of the first major upgrades added to the M4. At the foundation of each great shot taken is the trigger. The quick set trigger on the M4 allows for extensive adjustability based on the shooting scenario: adjust from just the right amount of pull for a hunting application to a match grade trigger that is light, clean, and crisp! With the new quick set trigger unit and top rail added, FX also improved the overall feel and comfort of shooting the Impact with the new FX grip. The design of the new grip is more defined and comfortable to grip onto, with just the right amount of palm swell and beaver tail to enhance comfort while shooting and giving you a firm hold on your Impact M4. The FX Impact M4 is available in a variety of calibers, sizes, and colors: COLORSBlackCopper CALIBERS / MAGAZINE CAPACITY.177 / 34 shots.22 / 28 shots.25 / 25 shots.30 / 23 shots OTHER LENGTHS AVAILABLEBarrel Length / Overall LengthCompact: 500mm / 640 (Black or Copper)Sniper: 700mm / 1000mm (Black or Copper)Extended: 800mm / 1120mm (Black or Copper)

FX Airguns FX Impact M4 | Standard $2,395.99

NEW WITH THE FX IMPACT M4 STANDARD The FX Impact M4 Standard comes in either black or copper and is available in .177, .22, .25, and .30 calibers. It has a barrel length of 600mm and an overall length of 860mm (or 34″). The high-capacity magazines on the FX Impact M4 have been redesigned and are now made from a stronger material with a new internal mechanism, ensuring that the inner drum rotates smoothly even when fully loaded with some of the heaviest slugs on the market. The single regulator design is standard on the M4 and features FX’s new brass piston regulator. It is stronger, has faster refresh rates, is more consistent, and can easily handle higher bottle pressures with a max working pressure of 170bar. When it comes to design, the Impact M4 has been given a new design without straying too far from the original iconic look. This has been accomplished through several small, yet important improvements throughout the entire platform: subtle new lines, cutouts for easy access to certain parts, and angles to tie it all together and make the M4 both more practical and pleasing to the eye. To further enhance both performance and the shooting experience of the FX Impact M4, you can expect improvement on the overall rigidity thanks to the design of a new top plate. It is significantly thicker and stronger, bringing more rigidity throughout the entire platform. The M4’s redesigned picatinny optics rail mounts to an 11mm dovetail rail machined into the factory backbone. This eliminates alignment issues when removing and reinstalling the optics rail. The Picatinny optics rail can also be loosened so it can slide along the 11mm dovetail rail and be re-clamped closer to the shooter, allowing the shooter to fine-tune eye relief for their chosen optic. The new quick set trigger system was one of the first major upgrades added to the M4. At the foundation of each great shot taken is the trigger. The quick set trigger on the M4 allows for extensive adjustability based on the shooting scenario: adjust from just the right amount of pull for a hunting application to a match grade trigger that is light, clean, and crisp! With the new quick set trigger unit and top rail added, FX also improved the overall feel and comfort of shooting the Impact with the new FX grip. The design of the new grip is more defined and comfortable to grip onto, with just the right amount of palm swell and beaver tail to enhance comfort while shooting and giving you a firm hold on your Impact M4. The FX Impact M4 is available in a variety of calibers, sizes, and colors: COLORSBlackCopper CALIBERS / MAGAZINE CAPACITY.177 / 34 shots.22 / 28 shots.25 / 25 shots.30 / 23 shots OTHER LENGTHS AVAILABLEBarrel Length / Overall LengthCompact: 500mm / 640 (Black or Copper)Sniper: 700mm / 1000mm (Black or Copper)Extended: 800mm / 1120mm (Black or Copper)

Saber Tactical FX IMPACT MAGNETIC ARM LOCK - ST0048 $35.00

This magnetic arm lock help keep the cocking arm open. Useful during competition when you are required to keep the bolt open. Features: 6061 T6 Aluminum Black anodized Stainless steel screw Easy install Weigh only 1oz Installation instruction: Highly recommend you remove the bottle Fire the gun to remove any air in the plenum Unscrew bolt in front of plenum. See picture 1 Install Magnetic Arm Lock

Find anything you need

Fast Shipping

Quality Control

Mounting & Sighting