Air Venturi

Air Venturi EC-3000 Compressor by Hill  Max Output Pressure: 4,350 PSI (300 BAR) Adjustable Output Pressure Automatic Shut-Off Runs off of 110V Outlet Air Cooled Automated cool down cycle during fills - compressor stops itself and restarts once cooled  Digital Display Output hose ends with female quick disconnect fitting Adjustable Unit Display (BAR, PSI, MPa) Displays fill pressure and temperature (in Celcius) during the fill Integrated output filter with bleed valve Ultra quiet - 75dB during operation Length – 465mm (18.3") Height – 385mm (15.16") Width – 235mm (9.25") Weight – approx. 55 lbs Made in England Please Note: The EC-3000 is recommended for filling PCP guns only and is not to be used for breathing air. Hill is well known as the leader in hand pumps that produce dry air for PCP airguns, and now they are expanding into the world of compressors, with the EC-3000!  This is the compressor of the future.  Not only does it have an adjustable output pressure and automatic shutoff, but it is all digital, meaning you can control your fill pressure down to the last PSI or BAR if you want to.  No messing with a dial on a physical gauge, if you want to fill your Air Arms S510XS to exactly 250 BAR, set the output pressure to 250 BAR, and start your fill.  The EC-3000 will stop when you get to 250 BAR, and you'll even be able to watch it build pressure on the screen as it fills.  It's as simple as that.   You can also adjust the display to show pressure in BAR, PSI or MPa.  That way, no matter what you are filling, you can ensure you are getting the right amount of air into your rifle or pistol with every fill.  Made in England by the cleanest name in hand pumps, Hill Pumps, the EC-3000 is made to last with minimal servicing needed.  There is an on-board filter to keep the air dry and clean and there's even a safeguard in place to keep the unit from overheating.   In addition to the cooling fan, the unit is programmed to shut off at 75C automatically, until it cools adequately, and then it will restart itself and continue the fill.  This system keeps you from having to constantly stop and start the unit and also eliminates the need for bulky water tanks.  The unit is lubricated with silicone lube, fed from a small container stored on the right side of the compressor.  It takes low maintenance to a whole new level!  Almost as low as the 75 dB sound signature the compressor makes while running!   Fill Times (all times include cool down stops): Kral Puncher Jumbo (425cc): 0 - 200 BAR in approx. 7:15 min Umarex Gauntlet (213cc): 0 - 3000 PSI in approx. 3:30 min Airforce Texan LSS CF (475cc): 150 - 250 BAR in approx. 3:30 min Benjamin Marauder (215cc): 1500 - 3000 PSI in approx. 1:45 min Airforce Condor (490cc): 0 - 3000 PSI in approx. 8 min FX Dreamline Classic (250cc): 0 - 230 BAR in approx. 3:50 min

Air Venturi Krypton 4500 PSI Compressor Max. fill pressure: 4500 PSI 15% faster fill times than prior models Adjustable automatic shutoff feature Improved moisture filtration Internally water-cooled Digital temperature gauge Uses 110V outlet For PCP airguns, airsoft, and paintball tanks Approximate fill times: 100 cu in tank from 0 - 4500 psi in 18:45 min 74 cu ft tank from 0 - 4500 psi in 47 min 98 cu ft tank from 0 - 4500 psi in 1 hr 16 min

PRE ORDER ETA JUNE 2023 Air Venturi Nomad III 4500 PSI Portable PCP Compressor Adjustable auto-shutoff Pressures up to 4500 PSI Up to 25% faster fill speed than prior model Less maintenance, no longer requires intermittent lubrication Integrated LED lights on underside of the unit for low light use Capable of running off of a 110V or 220V outlet or 12V car battery Power supply for electrical outlet use is built into the unit Compressor includes carrying handle Fan cooled Jumper cables included Hose w/ integrated moisture catch and female QD fittings Noise level while running is 92 dB. Dimensions: 10.6" L x 8" W x 7.9" Weight: 19.6 lbs. Ships with travel bag for easy transportation Please Note: The Nomad III is recommended for filling PCP guns only and is not to be used for breathing air. Approximate fill times: Diana Stormrider (100cc) 0-3000 PSI - approx. 2:50 minBenjamin Marauder (215cc) 0-3000 PSI - approx. 5:55 minAir Venturi Avenger (180cc) 0-4350 PSI - approx. 7:15 minAirforce Texan CF (475cc): 0-3625 PSI - approx. 13:30 minFX Impact M3 Sniper (580cc) 0-3625 PSI - approx. 16:05 min

*CALL FOR AVAILABILITY & DEALS*FOR AIR VENTURI AVENGER DONNYFL MODERATOR ADAPTERS CLICK HEREAir Venturi Avenger Bullpup If you love the original version of the Avenger but always wished for a shorter model that's easier to maneuver, the Air Venturi Avenger Bullpup is your solution. This updated version shaves off about 10" in length from the longer versions while still giving you the performance and adjustments that make it the entry level rifle you've always wanted. Besides the synthetic bullpup stock, the updated version gives you features you've been asking for, like magazine storage compartments in the stock and a cheek rest and buttpad that are adjustable. It also provides you with extra Picatinny accessory rails on the fore end for added flexibility, a pistol grip, and a longer Picatinny scope rail for bigger scopes. You'll still find the unique features that made this gun famous, like the externally adjustable regulator and the adjustable hammer spring that make it so you can tune the gun without having to take it apart. That flexibility means you can get the tune you want for the way you use it, like a hand pump fill with lower pressure and lower power, or a compressor fill with higher pressure and higher power. You'd usually expect to pay three or four times as much to get the accuracy and features you'll find on this bullpup air rifle, which is why everyone's talking about it. With the male quick disconnect fitting on the end and the fill pressure gauge on the left and reg pressure gauge on the right, you won't have any problem filling this rifle or keeping an eye on its performance. You can customize the 2 stage adjustable trigger to give you the crisp break you need for consistent accuracy, and the smooth sidelever works with either the two included magazines or the single shot tray for easy cycling and operation. This will be one of the most accurate and convenient guns you own, and you can set it up any way you want it to get exactly the tune you need. If the only thing holding you back from buying an Avenger was the length, now there's no reason to wait, so get an Air Venturi Avenger Bullpup from Airgun Depot today. Air Venturi Avenger, Bullpup Features: PCP Sidelever Max velocity: 1000 fps (.177), 930 fps (.22), 900 fps (.25) Max power: 22 fpe (.177), 34 fpe (.22), 45 fpe (.25) Synthetic bullpup stock Externally adjustable regulator (up to 3,000 psi/210 bar) Easily accessible hammer spring adjustment screw 2 stage adjustable trigger Max fill pressure: 4,351 psi (300 bar) 180cc air cylinder Built in magazine storage compartments in stock Vertically adjustable buttpad Fully shrouded barrel Three Picatinny rails on fore-end of stock Textured grip and forearm Four position adjustable cheekpiece Holes in front and rear of stock for mounting swivel studs for a sling Dual gauges - reg pressure (RH Side) and fill pressure (LH Side) Male quick disconnect fill fitting Easy access degassing screw Manual safety Picatinny optics rail Magazine capacity: 10rd (.177 & .22), 8rd (.25) Barrel length: 22.75" Overall length: 33" Includes two magazines and single shot tray

FOR AIR VENTURI AVENGER DONNYFL MODERATOR ADAPTERS CLICK HEREAir Venturi Avenger High end features at an entry-level price, the Avenger sets a new standard for similarly priced PCP’s to live up to. Featuring an externally adjustable regulator and externally adjustable hammer spring, the Avenger provides the user a seemingly infinite amount of performance adjustability never seen at this price point. A smooth sidelever action allows for quick follow up shots, and the fully shrouded barrel keeps your shooting quiet.  Available in .177 / .22 / .25 Pre-Charged Pneumatic  Sidelever Cocking Synthetic Stock Externally Adjustable Regulator (Up to 3,000 PSI / 210 BAR) Easily accessible Hammer Spring Adjustment Screw Two-Stage Adjustable Trigger Max Fill Pressure: 4,351 PSI (300 BAR)  Fully Shrouded Barrel Picatinny Rail on Fore-end of stock Holes in front and rear of stock for mounting swivel studs for a sling Dual Gauges - Reg Pressure (RH Side) and Fill Pressure (LH Side) Male Quick Disconnect Fill Fitting Easy Access Degassing Screw  Manual Safety 11mm dovetail/weaver combination scope rail  Magazine Capacity: 10 rds. (.177 & .22), 8 rds. (.25)  Includes two magazines and single shot tray