AEA Precision Airguns AEA | Magazines (SF/HP Carbine / HP SS / HP Varmint / HP Standard CE) $19.99
The price is for each magazine. Not a pack of 3 Fits: -SF Compact / Standard / Sniper-HP Carbine & Carbine TD-HP SS & HP SS Plus-HP Varmint-HP Standard Customized Edition .22 Cal - 12 Shots.25 Cal - 10 Shots.30 Cal - 9 Shots
AEA Precision Airguns AEA | Magazines (Challenger / Challenger Pro / HP MAX) $19.99
The price is for each magazine. Not a pack of 4 Fits: -HP SS MAX (.30 & .35 Cal ONLY)-Challenger 24" Models-Challenger 32" Models-Challenger Pro Models.22 Cal - 12 Shots.25 Cal - 10 Shots.30 Cal - 9 Shots.35 Cal - 8 Shots
Saber Tactical Saber Tactical | 52MM BOTTLE CLAMP ST0030 | AEA AIRGUNS $59.99
Finally a PROPER Clamp is available for the AEA line of airguns. The Saber Tactical 52 mm bottle clamp Has rubber pads on the inside to prevent any marring to your bottle.  This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories. Features: 6061 T6 aluminum Matte black anodize Compatible with: -AEA HP SS Plus-AEA HP SS MAX-AEA Zeus Gen 2-AEA Challenger PRO-AEA Terminator (.30 Cal version only)-Aea Airguns that utilize the 52mm size air tanks  
Black Arts Design AEA HP Series Folding Butt Stock Magnetic Closure $36.00
The folding butt stock of the AEA HP series of rifles is highly desirable, but its inability to maintain the folded position is a problem. The Black Arts Design AEA HP Folding Butt Stock Magnetic Closure is designed to keep the folding butt stock of your AEA HP rifle folded until you call for it to open.
-7% sale
UTG UTG | Dovetail to Picatinny/Weaver Rail Adaptor Mount $14.99 $15.99
• Matte Black Anodized 6061-T6 Aluminum Construction • 3.94" Scalloped 9 Slot Picatinny Rail with 0.59" Saddle Height • Compatible with Most 9mm - 11mm Flat or Round Dovetail Rails • Full Length Locking Side Plate for a Secure and Repeatable Zero Hold • Optional Recoil Stop Pin Provides Additional Retention Against Bidirectional Recoil
AEA Precision Airguns AEA | Valve Pin $15.00
*DUE TO THE NATURE OF THIS ITEM, VALVE PINS CAN NOT BE RETURNED OR EXCHANGED*  Replacement Valve pin for AEA Airguns FITS -HP Models (SS, SS PLUS, CARBINE, Standard, Varmint) -SF Models (Compact/Standard/Sniper) -Challenger 24” Models (.22 Cal / .25 Cal / .30 Cal) Only / Will not work with .35 cal or 32” model challenger series rifles
FX Airguns FX Magazines | FX Impact | Side-Shot Magazine $69.99
 FITS: FX Impact .177 Cal - 38 Rounds .22 Cal - 28 Rounds .25 Cal - 25 Rounds .30 Cal - 21 Rounds .35 Cal - 18 Rounds
FX Airguns FX Magazines | FX Crown | Maverick | Dreamline | Wildcat MkIII | Dynamic | Standard Side-Shot Magazine $49.99
 FITS: FX Maverick, FX Crown, FX Dreamline and the new FX Wildcat MKIII -.177 Cal - 21 rounds -.22 Cal - 18 rounds -.25 Cal - 16 rounds  -.30 Cal - 13 rounds -.35 Cal - 10 rounds
Saber Tactical Saber Tactical | 60MM BOTTLE CLAMP ST0004 $69.99
If you're uneasy about drilling into your factory gun stock, this 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. Has rubber pads on the inside to prevent any marring to your bottle.  This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories. Features: 6061 T6 aluminum Matte black anodize Compatible with: FX Carbon Fiber & Steel BottlesRAW (HM1000X, etc)Daystate (Redwolf, Airwolf, etc)Brocock (Commander, Bantam, etc)AEA HP Carbines (With Carbon Fiber Tanks)  
Black Arts Design Challenger Pro | Barrel Band $49.99
The Black Arts Design Barrel Band, AKA Barrel Support Stabilizer, reduces the likelihood of POI shifts from bumps to the barrel and ends barrel droop induced by moderators. Our Gen2 barrel shroud section houses two TPU bushings. These bushings allow for a very snug fit but still allow a no hassle installation. The lower section clamps to the air tube with two M3 screws providing substantial resistance to movement.  Material: - Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, andhigh dimensional accuracy. The addition of carbon fibers increases flexural modulus(stiffness) well above standard PETG.- TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant toabrasion. Features: -The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation.- TPU has rubber like characteristics adding dampening qualities to our barrel band.- No grub screws! The lower section clamps securely with two alloy steel screws and nuts.Nuts are held captive within internal slots providing a secure hold while maintaining aclean appearance.- Bolstered design along the circumference increases flexural modulus (stiffness) andaesthetic appeal.
AEA Precision Airguns AEA | Fill Probe $15.00
Fill Probe for AEA Airguns8MM & 7MM
Black Arts Design Zeus Gen 2 | Barrel Band $49.99
The AEA Zeus .72 cal. has power but that power comes with a price…it is loud! DonnyFL took on quieting the thunderous roar of the Zeus with the Great Kami. The weight of the Great Kami at the end of the Zeus’s barrel causes barrel droop lowering the POI significantly. Black Arts Design stepped in to end this droop with the AEA Zeus Barrel Band.
UTG UTG | .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor Mount $12.99
•  .22/Airgun Dovetail to Picatinny/Weaver Rail Adaptor •  Innovative Rail Platform to Convert Most .22/Airgun Rails •  Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base •  Extremely Low Profile and Lightweight •  Precision and Repeatable Alignment •  Easy Installation with Most .22/Airgun Rails, 2PCs/Set •  Removable Stop Pin for Extra Secure Installation
Saber Tactical FX IMPACT TRS RAIL from $239.99
Saber Tactical Top Tail Support (TRS)This new rail changes an already  great looking tactical gun into a jaw dropping beast! More importantly, it opens up the possibilities with the latest airgun trends. From the new top rail mounted bipod by GRS to inline night optics, and everything in between.   Features: - Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level.  -M-Lok slots allowing you to attach varied accessories such as; Flashlight, laser and weights. -Build in 20 MOA giving your scope more elevation for long range shooting -A Delrin shroud clamp to prevent shroud drooping. Minimizes or eliminates any point of impact changes -Available in standard (FX Impact Standard / Sniper) and compact (FX Impact Compact) sizes with black anodize.   
Eagle Vision Eagle Vision | FX Magazine | FX Impact High Capacity Magazine $113.99
Please note:this magazine is designed for slugs only. You may fit a pellet on them if the pellet diameter is not less than 5.70mm (we don’t guarantee). The spring’s tension is set to 2 full turns for slugs. If you are using soft lead pellet you may need to reduce attention to 1 to 1.25 of a turn. You may be unable to fit our magazines to your gun If you are using after market non standard or non factorry original part such as Brass Inlet Transfer Port . Before purchase this you need to make sure all your rifle part is original.  We do not accept return if magazines get dent or scratched for that reason. This is a high capacity magazine, designed for the FX Impact platform.  It is made from aluminium and cut by CNC machine.  Improvements include: Magnetic cover   Higher capacity Easy load  Secure pellet retention  Very smooth rotation Numbered shot count 22 (5.5mm) – 27 shots 25 (6.35mm) – 26 shots 30 (7.62mm) – 22 shots This package includes: 1 x 3mm Allen key6x rubber ball holder 1x waterproof storage case   Please note: This product will not fit the early model FX Impacts (MK1/2) unless they have been fitted with the adapter plate to accept larger capacity magazines. ***ALL SALES ARE FINAL ON THESE MAGS***    

Fast Shipping

Orders are usually fulfilled within 1 business day

Quality Control

Each rifle is tested and fired prior to being shipped

Mounting & Sighting

We offer free mounting/sighting and installation of accessories
American Express Apple Pay Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa