[title]
[message]
Accu-Shot
Accu-Tac
AEA
AEA Precision Airguns
Air Venturi
AirForce
AirMaks Arms
Airmarksman
Alkin
Arken Optics
Athlon Optics
Black Arts Design
Brocock
DonnyFL
Eagle Vision
EDgun
Element Optics
ERGO Air
Field Optics Research
FX
FX Airguns
FX Outdoots
GRS
H&N
Hatsan
Holosun
huben
Integrix
JSB
JTS Airguns
LCS Air Arms
Leapers
Mr Hollowpoint
Nielsen Specialty Ammo
Niksan Defence
Patriot Outdoors
PCP Kong
Predator
Rapid Air Worx
Route
Saber Tactical
Skout Airguns
The Pellet Shop
UTG
Warne
Western Airguns
ZAN
Zero Compromise Optic
AEA Precision Airguns
AEA | Folding Stock adapter
$45.00
Replacement folding stock adapter for AEA Airguns
DonnyFL
AEA | HP & SF Series | Moderator Adapter #A77
$39.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF
Works on AEA HP/SF models & HP SS MAX .30 CAL ONLY
Features:
6061 Aluminum
1/2 x 20 male threads
Black Anodized
DonnyFL
AEA | HP SS Max .357 Cal | Challenger "BIG BORE" .357/.45/.50 Cal #A91 Moderator Adapters
$39.99
This adapter is compatible with the .35/.45/50 Cal AEA Challenger "BIG BORE" (side lever model only) as well as the .357 AEA HP SS Max. #A91
Features:
M18x1 male threads
6061 T6 Aluminum
Anodized
Knurled thread protector
AEA Precision Airguns
AEA | Magazines (Big bore 35/45/50/510 Cal)
$29.99
Fits:
-HP SS MAX (.45/.50/.510 ONLY)-Challenger Big Bore / Elite (Sidelever model)
AEA Precision Airguns
AEA | Magazines (Challenger / Challenger Pro / HP MAX)
$19.99
The price is for each magazine. Not a pack of 4
Fits:
-HP SS MAX (.30 & .35 Cal ONLY)-Challenger 24" Models-Challenger 32" Models-Challenger Pro Models.22 Cal - 12 Shots.25 Cal - 10 Shots.30 Cal - 9 Shots.35 Cal - 8 Shots
AEA Precision Airguns
AEA | Magazines (SF/HP Carbine / HP SS / HP Varmint / HP Standard CE)
$19.99
The price is for each magazine. Not a pack of 3
Fits:
-SF Compact / Standard / Sniper-HP Carbine & Carbine TD-HP SS & HP SS Plus-HP Varmint-HP Standard Customized Edition .22 Cal - 12 Shots.25 Cal - 10 Shots.30 Cal - 9 Shots
AEA Precision Airguns
AEA | Magazines (Terminator)
from $30.00
Fits:
-AEA Terminator Gen 2 ModelsPlastic Case.30 Cal - 11 Shots (CNC).35 Cal - 10 Shots
AEA Precision Airguns
AEA | Rail Attachment Kit
from $75.00
Rail Attachment kits for AEA Airguns.Short Rail:Fits AEA HP SS w/ 41mm Air Tube Medium Rail:Fits AEA HP Standard CE w/ 41mm Air TubeLong Rail:Fits AEA Terminator .35 cal w/ 41mm Air Tube
Made of CNC aluminum
DonnyFL
AEA | Terminator M18x1 Big Bore Adapter #A64
$39.99
Adapters are threaded for attaching a moderator
Thread: M18 x 1
Works on AEA TERMINATOR models.
You may need to heat up the front cap to loosen the epoxy. Then unscrew from gun.
AEA Precision Airguns
AEA | Valve Pin
$15.00
*DUE TO THE NATURE OF THIS ITEM, VALVE PINS CAN NOT BE RETURNED OR EXCHANGED*
Replacement Valve pin for AEA Airguns
FITS
-HP Models (SS, SS PLUS, CARBINE, Standard, Varmint)
-SF Models (Compact/Standard/Sniper)
-Challenger 24” Models (.22 Cal / .25 Cal / .30 Cal) Only / Will not work with .35 cal or 32” model challenger series rifles
Black Arts Design
Air Venturi Avenger Barrel Band
$40.00
The Gen2 Black Arts Design Barrel Band System is designed to reduce the POI shifts inherent in the Air Venturi Avenger and tighten its groups. We developed a 2-component system that removes the main problem, the factory barrel band. The Air Venturi Avenger factory barrel band ties the forend of the stock directly to the barrel. Any pressure applied to the forend is fed directly to the barrel via the factory barrel band. Our 2-component system divorces the forend and lower air tube from the barrel. This is accomplished through our Forend Bracket which secures the forend to ONLY the lower air tube. The Forend Bracket does not contact the upper air tube or barrel shroud. This ends the intimate relationship between the stock forend and barrel. Our Barrel Band then ties ONLY the upper air tube and barrel providing stability. These 2 components will tighten groups and drastically reduce the seemingly random POI shifts. We highly recommend the DonnyFL Avenger Extender 1/2×20 Adapter be paired with our 2 component Barrel Band System.
Material
Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fibers increases flexural modulus (stiffness) well above standard PETG.
TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant to abrasion.
Features
The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation.
TPU has rubber like characteristics adding dampening qualities to our barrel band.
No grub screws! The lower section clamps securely with a single M3 alloy steel screw and nut. The nut is held captive within an internal slot providing a secure hold while maintaining a clean appearance.
Bolstered design along the circumference increases flexural modulus (stiffness) and aesthetic appeal.
Installation Instructions Gen2: https://blackartsdesign.com/avenger-gen2-barrel-band-system-installation/
Installation Instructions (systems sold prior to 04/08/22): https://blackartsdesign.com/air-venturi-avenger-barrel-band-system-install/
Black Arts Design
Air Venturi Avenger Bullpup Barrel Band
$30.00
The Gen2 Black Arts Design Barrel Band is designed to reduce the POI shifts inherent in the Air Venturi Avenger Bullpup and tighten groups. The Black Arts Design Barrel Band adds stability to the Avenger Bullpup that is not present in factory configuration. We highly recommend the DonnyFL Avenger Extender 1/2×20 Adapter be paired with our Barrel Band. This package is available here.
Material
Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fibers increases flexural modulus (stiffness) well above standard PETG.
TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant to abrasion.
Features
The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation.
TPU has rubber like characteristics adding dampening qualities to our barrel band.
No grub screws! The lower section clamps securely with a single M3 alloy steel screw and nut. The nut is held captive within an internal slot providing a secure hold while maintaining a clean appearance.
Bolstered design along the circumference increases flexural modulus (stiffness) and aesthetic appeal.
DonnyFL
Air Venturi Avenger Extender/Umarex Origin 1/2 x 20 Adapter #A70
$44.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF**DOES NOT FIT ANY OF THE AVENGER X SERIES GUNS**
This version allows you to use a larger suppressor than the Tanto or KOI without having to remove it to fill the gun. Also redesigned to slide over the barrel to keep the barrel centered with the adapter. This reduces the chance of pellet clipping and improves accuracy.
Features:
Compatible with .177 caliber to .25
6061 Aluminum T6
Black anodized
1/2 x 20 male threads
*Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping.
Air Venturi
Air Venturi EC-3000 EVO Compressor by Hill
$1,499.99
1-year limited warranty
Air Venturi EC-3000 EVO Compressor by Hill
Max Output Pressure: 4,500 PSI (310 BAR)
Adjustable Output Pressure
Automatic Shut-Off
Automatic Air Pressure Purge
Runs off of 110V outlet
Air cooled
Automated cool down cycle during fills
Digital Display
Output hose with female quick disconnect fitting
Adjustable Unit Display (BAR, PSI, MPa)
Displays fill pressure and temperature (in Celcius) during the fill
Integrated output filter with bleed valve
Ultra quiet 75dB operation
Length: 465mm (18.3")
Height: 385mm (15.16")
Width: 235mm (9.25")
Weight: approx. 55 lbs
Made in England
Please Note: The EC-3000 is recommended for filling PCP guns only. Do not use for breathing air.
Hill Crank Case Oil is in the perfect size bottle for the unit as it takes almost the whole 50ml bottle to fill the crank properly on the initial fill, and should not need topping up for some time.The Silicone Oil is used all the time by the pump and should need replacing after approximately 50 hours of run time.