Products – Page 40 – The Pellet Shop

-6% sale

UTG Bug Buster 3-9x32 Scope & UTG Snap in Adapter

Leapers UTG Bug Buster 3-9x32 Scope & UTG Snap in Adapter $189.00 $199.00

UTG 3-9X32 1" BugBuster Scope, AO, RGB Mil-dot, QD Rings (SCP-M392AOLWQ) • Built on TRUE STRENGTH® Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fogproof and Rainproof • 1 Inch Tube with Emerald Coated Lens for Crystal Clear View with Maximum Light Transmission • Premium Zero Lockable and Zero Resettable Target Turrets with Consistent and Precise 1/4 MOA Per Click Adjustment • Range Estimating Mil-dot Reticle for Optimal Aiming and Shooting Performance • Adjustable Objective from 3 Yards to Infinity to Achieve Parallax-free View • Red/Green Dual Illumination for Versatile Applications and Weather/Light Conditions • Large Field of View (Wide Angle) and Most Accommodating Eye Relief for Optimum Critical CQB Mission • Complete with 2" Sunshade, High Quality Flip-open Lens Caps and Quick-detachable Rings UTG .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor (MNT-DT2PW01) .22/Airgun Dovetail to Picatinny/Weaver Rail Adaptor • Innovative Rail Platform to Convert Most .22/Airgun Rails • Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base • Extremely Low Profile and Lightweight • Precision and Repeatable Alignment • Easy Installation with Most .22/Airgun Rails, 2PCs/Set • Removable Stop Pin for Extra Secure Installation

Leapers UTG MAX STRENGTH 1" | 2 PC | PICATINNY Rings $26.99

ITEM NUMBER : RG2W1154 • 4-screw Medium Profile "Tiger" Ring • Machined from Aircraft Aluminum Alloy with Heavy Duty Steel Locking Plate for Maximum Strength Holding Zero • Twist Lock Design for Quick and User Friendly Easy Installation • Light Weight with See-through Tunnel and Slot Cut on Ring Top • High Quality Synthetic Protective Tape on Rings' Inner Surface to Protect Your Equipment • Optimized Dimensions for Best Fit on All Picatinny/Weaver Rails • Strong Recoil Stop Cross Bolt for Optimized Fit and Zero ITEM NUMBER : RG2W1204 • 4-screw High Profile "tiger" Ring • Machined from Aircraft Aluminum Alloy with Heavy Duty Steel Locking Plate for Maximum Strength Holding Zero • Twist Lock Design for Quick and User Friendly Easy Installation • Light Weight With See-through Tunnel and Slot Cut on Ring Top • High Quality Synthetic Protective Tape on Rings' Inner surface to protect your Equipment • Optimized Dimensions for Best Fit on All Picatinny/Weaver Rails • Strong Recoil Stop Cross Bolt for Optimized Fit and Zero

Sold out -11% sale

UTG OP3 Micro SL | Red Dot & UTG New Gen Adapter

The Pellet Shop UTG OP3 Micro SL | Red Dot & UTG New Gen Adapter $139.00 $155.00

UTG OP3 Micro SL (OP-RDM20CT) Precision Machined from 6061-T6 Aluminum and Finished in a Matte Black Anodization • Red 4.0 MOA Single Dot with 8 Brightness Intensity Settings • Side Loading Battery Compartment, No Longer Necessary to Remove Sight and Re-zero when Replacing Battery • 15,000+ Hours Battery Life at Middle Brightness Setting • Crisp 1 MOA per Click Adjustment • Wide Field of View 23mm Lens • IPX7 Waterproof Rated • Includes Removable Low Profile Picatinny Mounting Base • Mounting Base Interface Uses the Common Docter Footprint • Optic Height Co-witnesses with Most Suppressor Height Iron Sights • Tertiary Aiming Point Laser Engraved on Rear Face of Optic Hood • Compatible with Most Optics Ready Pistol Systems and All UTG® RDM20 Mounts UTG New Gen Dovetail to Picatinny/ Weaver Adaptor Mount (MNT-PMTOWL-A) UTG New Gen Dovetail to Picatinny/Weaver Rail Adaptor Mount • 3.94" Scalloped Picatinny Rail with 9 Slots with a 0.59" Saddle Height Provides Ample Space for Snag Free Mounting of Different Sized Optics and Flexible Eye Relief Adjustment • Compatible with Most 9mm - 11mm, Flat or Rounded, Airgun/Shotgun Dovetail Rails • Three High Strength Locking Screws Ensure a Solid Mount-to-Receiver Lock Up • Recoil Resistant Stop Pin Aids in Additional Zero Retention Against Bidirectional Recoil Force Typical of Spring Operated Airguns • Precision Machined from Aircraft Grade Aluminum and Finished in a Matte Black Hard Coat Anodize

-14% sale

Leapers UTG PRO P.O.I | 2 PCs High Profile | DOVETAIL Rings $55.95 $64.99

Proudly Designed and Made in USA • High Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 37mm Center Height to Fit 30mm Tube Optics with up to a 73mm Outer Objective Diameter • The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tubeb) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Holdc) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil • Original Snag-free Contoured Profile with Reduced Weight and Size • 6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish • 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails

-14% sale

Leapers UTG PRO P.O.I | 2 PCs High Profile | PICATINNY Rings $55.95 $64.99

ITEM NUMBER : RDU013022 • Proudly Designed and Made in USA • High Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 37mm Center Height to Fit 30mm Tube Optics with up to a 73mm Outer Objective Diameter • The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tubeb) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Holdc) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil • Original Snag-free Contoured Profile with Reduced Weight and Size • 6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish • 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails

-14% sale

Leapers UTG PRO P.O.I | 2 PCs Medium Profile | DOVETAIL Rings $55.95 $64.99

• Proudly Designed and Made in USA • Medium Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 30mm Center Height to Fit 30mm Tube Optics with up to a 59mm Outer Objective Diameter • The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tubeb) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Holdc) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil • Original Snag-free Contoured Profile with Reduced Weight and Size • 6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish • 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails

-14% sale

Leapers UTG PRO P.O.I | 2 PCs Medium Profile | PICATINNY Rings $55.95 $64.99

Proudly Designed and Made in USA • Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 30mm Center Height to Fit Optics with a 30mm Tube and up to a 59mm Outer Objective • The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interactionb) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Holdc) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations • 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width • Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms • Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize • UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size

UTG UTG PRO | AR15 6-POSITION RECEIVER EXTENSION TUBE | MIL-SPEC $21.97

Part Number: TLU001 • 6-position Mil-spec Diameter Receiver Extension Tube for AR15 Rifles• Extension Tube CNC Machined from 6061-T6 Aircraft Grade Aluminum with Precisely Rolled Threads for Durable Thread Engagement with Lower Receiver• Underwent the Tightest Tolerance Controls for a Secure Fit and Function with Various Collapsible Stocks• Finished in a Matte Black Type III Class II Hard Coat Anodize• Proudly Designed and Made in USA HEIGHT (IN) 1.5 HEIGHT (MM) 36.8 LENGTH (IN) 7.3 LENGTH (MM) 184.2 WIDTH (IN) 1.1 WIDTH (MM) 27.94

UTG PRO | AR15 OPS READY S1 MIL-SPEC STOCK ONLY

UTG UTG PRO | AR15 OPS READY S1 MIL-SPEC STOCK ONLY $34.50

Part Number: RBUS1BMS Proudly Designed and Made in USA Built for Heavy-duty Operations with Tightest Tolerance Control Providing the Most Secure Fit and Silent Operation Mil-spec Stock Molded from Impact Resistant High-strength Polymer in Black Built-in Rubberized Butt Pad, Chamfered Front and Rear Edges and Slanted Cheek Rest Surface Further Enhances Shooting Stability and Consistent Firearm Control Dual Storage Compartments with Removable Waterproof Caps Provide Dry Storage for Batteries (Up to 8 CR123) and/or Other Essential Accessories Integral Ambidextrous Sling Loop and QD Sling Swivel Housing for Left or Right Handed Shooters Extended 8" Length for Increased Length of Pull - Combine with our Super Slim Handguards for Superior Firearm Handling Polymer Stock Only HEIGHT (IN) 5.5 LENGTH (IN) 8.5 LENGTH (MM) 215.9 WIDTH (IN) 2.3

-7% sale

UTG UTG PRO | Keymod Picatinny Rail Section $13.95 $14.95

• Proudly Designed and Made in USA• Innovative Rail Edge Design Providing True Continuous Rail Slots When Connecting Multiple Rail Sections• Precision Machined from Aircraft Grade Aluminum Alloy with Anodizing• Includes Required Keymod Compatible Steel Locking Nuts, Steel Allen Screws and Allen Wrench for InstallationItem Number-8 Slot: MTURS04M-4 Slot: MTURS04S

sale

UTG UTG Recon 360 TL Bipod | Picatinny from $73.99 $89.99

UTG Recon 360 TL Bipod Features: • 3 Position Folding Legs and Lockable Leg Extensions Equipped with Nonslip Rubberized Foot Pads • Center Height Adjustable from 5.5"-7" | 7"-9" | 8"-12" • Fine-tunable Tension Adjustment Lever Applies the User Desired Amount of Tension to the Bipod's 360° Panning & 15° Forward, Rearward, Left, and Right Tilt • Low Profile Offset Picatinny Mount with Knurled Thumb Nut and Reinforced Steel Cross Bolt • Durable Aircraft Aluminum Construction Finished in a Matte Black Anodization

UTG | .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor Mount

UTG UTG | .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor Mount $12.99

• .22/Airgun Dovetail to Picatinny/Weaver Rail Adaptor • Innovative Rail Platform to Convert Most .22/Airgun Rails • Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base • Extremely Low Profile and Lightweight • Precision and Repeatable Alignment • Easy Installation with Most .22/Airgun Rails, 2PCs/Set • Removable Stop Pin for Extra Secure Installation

-7% sale

UTG UTG | Dovetail to Picatinny/Weaver Rail Adaptor Mount $14.99 $15.99

• Matte Black Anodized 6061-T6 Aluminum Construction • 3.94" Scalloped 9 Slot Picatinny Rail with 0.59" Saddle Height • Compatible with Most 9mm - 11mm Flat or Round Dovetail Rails • Full Length Locking Side Plate for a Secure and Repeatable Zero Hold • Optional Recoil Stop Pin Provides Additional Retention Against Bidirectional Recoil

-16% sale

UTG | Gen 2 Light/Green Laser Combo with Integral Mount

Leapers UTG | Gen 2 Light/Green Laser Combo with Integral Mount $113.99 $134.68

2-In-1 tactical 2nd generation Flashlight/green laser combo with Integral mounting deck and patented QD lever lock New flashlight circuit board design with 400 lumen power upgrade and extended 3 hour runtime Class 3R Green Laser with Textured Rubber Push-button On/Off, Remote Pressure Switch, 1x CR2 Battery and 2x CR123A Batteries; Laser Output 2. 5~3. 1mW Rotational laser ring to provide 10 solid locking positions for laser around the light for close -to-bore and individualized placement options Triple-function Flashlight end cap with push-button momentary on, permanent twist on, and additional remote pressure switch operation Product is Made in China

The Pellet Shop UTG | Homeland Security Gun Case from $32.00

UTG® 25" Homeland Security Gun Case• Durable 600D Polyester Construction• 21" X 10" Front Compartment with Inner MOLLE Panel Layout• 25" X 12" Padded Main Compartment with 4 User Configurable Retention Straps• Outside Features Include: D-ring Wall Hanger, Carry Handle, Adjustable Shoulder Strap, Morale Patch Panel, and Dual Lockable Zippered Closures UTG® 38" KIS Homeland Security Keep-It-Simple Gun Case • Durable 600D Polyester Construction • Front Pouch with Hook-and-loop Closure for Storing Mags, Ammo, Cleaning Supplies, and Other Accessories • Front Zippered Pouch for Various Accessories • Clear Name Tag Holder • Padded Interior on Each Side of the Main Compartment Provide Maximum Protection from Dents and Scratches • 1.5" Wide Adjustable Shoulder Strap for Hands Free Transportation • Durable 1.5" Wide Two-piece Carry Handle for Immediate Grab and Go • D-rings for Wall Hanger Storage • Dual #8 Heavy Duty Lockable Zippers • Main Compartment Size: Length 38" x Height 11"

Find anything you need

Fast Shipping

Quality Control

Mounting & Sighting