Easily clamp this Arca Swiss rail to an existing picatinny rail to extend the bipod rail. T slots on both sides allowing you to attach T slot/M Lok accessories. Features: 6061 T6 aluminum black anodize 4mm hex key required to loosen and tighten clamp 1/4 - 20 threads to connect common camera tripod adapters 2.25 inches wide x 7 inches long 7.7 oz

Adapters are threaded for attaching a moderator Thread: M18 x 1  Works on AEA TERMINATOR models. You may need to heat up the front cap to loosen the epoxy. Then unscrew from gun.

Saber Tactical Vertical Grip: Rubberized Overmolded Edition Engineered for Precision. Built for Every Precision Shooter. The Saber Tactical Vertical Grip has always been the gold standard for serious airgunners and precision rifle shooters. Now we've reimagined it, delivering the same championship-proven ergonomics at a price point and new features that put elite performance within reach of everyone, from the competitive Benchrest and PRS/NRL22 shooter to the backyard airgunner who refuses to compromise on quality. The Case for Going Vertical In disciplines like Benchrest and PRS/NRL22, where shot-to-shot consistency is the entire game, a vertical grip delivers the stable, repeatable hand position that serious competitors rely on. The additional point of contact locks your hold, ensures proper hand and trigger finger positioning, and builds a platform that performs the same on shot one as it does on shot fifty.  In Benchrest, scoring targets are measured in fractions of an inch. In PRS/NRL22, you're transitioning between targets and positions under time pressure. Either way, that consistency doesn't just help, it's what separates a podium finish from the middle of the pack. And for the recreational airgunner who wants their setup to feel and perform like the pros? That same grip confidence translates directly to more satisfying shooting at any level. What's New: The Rubberized and Textured Overmold Design The all-new rubberized overmold construction wraps our proven grip geometry in a tactile, high-grip rubber compound built for real-world conditions. The deeply textured surface keeps your hand planted through sweaty summer matches and cold early-morning competitions alike, no slipping, no shifting, no second-guessing. PRS/NRL22 shooters will appreciate how confidently it seats through every positional transition, while Benchrest competitors will notice how the softer and stickier material interface quiets movement during the hold. Critically, we didn't change a thing about the ergonomics. The exact same palm swell, radius, and natural wrist angle from the aluminum version is carried over in full, just wrapped in a durable overmold that reduces vibration and hand fatigue across long match days. Built Around the AR Grip Interface Standard If your airgun accepts a standard AR-pattern grip, this is a direct drop-in upgrade. No adapters, no modifications, no guesswork, just mount and shoot. Compatible with dedicated Benchrest rifles, PRS/NRL22 chassis setups, recreational air rifles, rimfire and centerfire precision rifles built around the AR grip standard. Included CNC Aluminum Thumb Shelf Included with every grip is a precisely machined CNC aluminum angle adjustable thumb shelf, an add-on most manufacturers charge extra for or don't offer at all. Every time you mount the rifle, your thumb finds the same reference point, your fingers register in the same position, and your trigger finger meets the blade at the same angle with the same reach. For Benchrest airgunners where tiny variations open groups, and for PRS/NRL22 competitors reacquiring their grip between positional stages, that repeatability isn't a luxury, it's a performance requirement. Rigid, dimensionally consistent CNC aluminum means it stays that way all season long. Feature Summary Rubberized overmold construction, aggressive texture, superior grip retention in all conditions Perfected ergonomics and palm swell born from months of intensive R&D, including clay modeling, multiple prototype iterations, and feedback from a wide community of pro shooters to dial in the exact palm swell, hand position, and wrist angle, now carried over exactly into the rubberized version so you get the benefit of that work from the moment you mount it AR grip interface compatible, fits all AR grip-compatible precision air rifles, no adapters required Includes CNC aluminum angle adjustable thumb shelf, consistent hand placement, trigger reach, and repeatable trigger breaks Reduces vibration and fatigue across long match days and extended range sessions Significantly more affordable than the aluminum version, pro-level feel at a price that works for every airgunner Who It's For The Benchrest competitor chasing the tightest possible groups. The PRS/NRL22 airgunner who needs consistent performance from position to position. The backyard airgunner who wants that pro-level feel Saber Tactical is known for. Whatever your discipline, this grip gives you the foundation to shoot your best. Upgrade your hold. Elevate your shot. The Saber Tactical Vertical Grip, now in rubberized over mold.

With a new rugged front cap design, signature DonnyFL body grooves and bolt endcap, the KOI is a great addition to any shrouded or un-shrouded air rifle. This model has the smallest outer diameter compared to the other DonnyFL models but don’t let the size fool you. With the added vent holes around the front, it is as impressive as the others. Features: Available in .22/.25 and .30 Mono-core design Precision CNC’ed by professional machinist Sand blasted and anodized for maximum durability Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt or 1/2 x 20 Cone Comes pre-wrapped in felt Machined grooves on the outside for easy handling Weight:  1. With 1/2 x 20 Bolt rear end cap: 4.7 oz2. With 1/2 x 20 Cone rear end cap: 5.0 oz3. With M20x1 Bolt rear end cap: 4.6 oz4. With M14x1.25 Bolt rear end cap: 4.6 oz*Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only.  It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.

PRODUCT DESCRIPTION Crafted from premium 6061 aluminum, this low profile arca rail enhances the aesthetic of the gun as well as the comfort when shooting off hand. The rail also has a 1/4-20 threaded hole for camera tripod adapters. Underneath the rail are MLok slots to equip the gun with different accessories. Features: 6061 T6 aluminum black anodize with lasered logo threaded nylon tipped grub screw to help rail flex Extends to the end of a 300cc FX bottle

UNIVERSAL PICATINNY TO PICATINNY RAIL -2 Inch Arca -4.5 Inch of picatinny -1/4-20 Threaded hole for camera tripod adapter

Ronin for the .357 is a redesign of the Ronin 1/2 x 20. If you do not like the length of the Emperor, this is an awesome alternative. Rear cap was also changed to reduce weight.  2 x 6.25 inches  Available for .357/.457/.50 caliber airguns M18x1 threaded end cap Mono-core design to increase accuracy and limit the chances of pellet clipping No moving parts or epoxy that may become loose after 1000's of rounds Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight 9.7 oz *Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. DISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only.  It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.

Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up. *The products on DonnyFL are INTENDED for use on airguns only.  It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.

Looking to improve your performance for competition shooting? The MLOK weights with brass inserts are the solution you've been seeking! Designed to balance your gun, these weights are crafted from high-quality 304 steel, ensuring a durable and sturdy construction that will last you many competitions to come.The MLOK weights feature brass inserts which help to redistribute the weight of your gun, creating a more balanced and stable shooting experience. The electro-plating finish adds an extra layer of protection to resist wear and tear, ensuring your MLOK weights stay in top condition for longer.MLOK weights with brass inserts are easy to install and compatible with most MLOK rails, making them a versatile addition to any shooting setup.  Features a striking gun metal gray color with a mirror finish, complemented by brass insertsSet of 2

Adapters are threaded for attaching a moderator Thread: M18 x 1 The new adapter have finally arrived. This new design goes back to the barrel and slides over the barrel bushing. This will keep the barrel aligned with the adapter's exit hole. Please note that the barrel bushing is not included. The .357 Benjamin Bulldog is becoming popular for big game hunting. Add this adapter and pair it up with a .357 Ronin or .357 Emperor to make it the ultimate hunting airgun. The factory gun already has the barrel bushing. I took mime off to show how it fits into the adapter in the picture. Made by CNC for accuracy Very easy to install. Remove the top and bottom screw securing the front cap and swap it out for this adapter. Screw the two screws back in and you're done. No need to remove the shroud. Matte Black anodize Knurled thread protector When putting this on, press the adapter into the shroud as you tighten the two screws. This will ensure the adapter is flush with the shroud.

Wether you have the tube version or the bottle version of the Avenge X, upgrade your gun into our Saber Tactical Chassis. The chassis is very easy to install. It gives you a long bottom ARCS Swiss rail as well as picatinny in the front and plenty of MLok slots to attach accessories.  Features: 6061 Aluminum Black anodize Includes a buffer tube adapter if you want to use the factory rear tube and stock, or you can use any AR compatible buffer tube and stock combination. Compatible with tube and bottle version Note: If you do not have the Avenge X tactical model, you will need to buy an AR compatible grip as well as AR buffer tube and stock of your choice. A beaver tail AR-GRIP will not fit this chassis.   INSTALLATION:

Product description Sam Yangs are known to output some crazy power. This adapter with M18x1 threads will allow you to screw on the Emperor v3. You might have need the Extender as well if Silence is a Priority!

If you have our Tactical Chassis for your FX King/Dynamic/Panthera and also have a 700cc bottle, this rail will extend to almost the full length. This gives you more Arca rail on the bottom as well as more MLok slots on the sides. Available in bronze and grey.