Saber Tactical
MONO-POD FIELD VERSION ST0027
$134.99
$149.99
If your gun already has the Saber Tactical buttstock or you plan to get one, this mono-pod is a great addition for field use. Even if the the shooting surface is not perfectly fat, the ball joint easily adjust to it.
Features:
Stainless Steel Precision lead screw allowing for smooth micro adjustments
Other metals are aluminum 6061 T6
Rubber bottom for extra grip
No need to loosen knobs before making adjustments
Includes adapter to attach to buttstock
Detach and attach mono-pod to adapter by sliding the mono-pod in.
Strong magnets help keep it secure
Ball joint near the base allowing you to cant
DonnyFL
DonnyFL | END CAP/QD ADAPTER
from $18.00
$20.00
FEATURES:
Rear caps for existing moderators
M71 = Sumo/Tatsu/Shogun QD rear cap with 1/2 x 20M72 = Ronin/Emperor/ Fat Boy QD rear cap with 1/2 x 20M73 = KOI/Tanto QD rear cap with 1/2 x 20M74 = FX/DonnyFL QD rear cap with 1/2 x 20M86 - Ronin/Emperor QD rear cap with M18x1
M87= FX/DonnyFL QD rear cap with M18x1
QD AdaptersM75 = QD barrel adapter M14x1.25M76 = QD barrel adapter M18x1M77 = QD barrel adapter M20x1M78 = QD barrel adapter 1/2 x 20
Product details:
Indexed so it locks on at same position every time
Made of 7075 aluminum
Grey anodized
Includes barrel/shroud adapter and rear cap
Select the barrel thread specific to your airgun
DISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.Compatibility: Will not work on old moderators with the flat front cap.
DonnyFL
Epoch Moderator Adapter #A112
$35.99
$39.99
Product description
If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with M18X1 threads.
Features:
6061 Aluminum
Black anodize
Knurled thread protector
Made for the .357 caliber Skout
Saber Tactical
Saber Tactical | Tank Bag ST0036
$179.99
$199.99
The Saber Tactical Tank Bags are here, designed to accommodate your 9.0L tank with ease.
Key Features:
Spacious Design: Large enough to fit a 9.0L tank with a maximum 23-inch circumference and 23-inch length (29 inches with valve together).
Durable Material: Now available in a sleek grey color, offering improved aesthetics and durability.
Increased Diameter: The tank bags have been upgraded with an additional inch in diameter to make it easier to remove larger air supplies.
Accessory Pockets: Includes two large pockets for accessories, ensuring you have everything you need in one place.
Customization: Features a long velcro strip for attaching patches.
Molle Webbing: Equipped with molle webbing to attach your other molle-compatible accessories.
Clear ID Slot: Includes a clear slot for your ID card for easy identification.
Important Note: The iconic green Saber Tactical Tank Bags have been officially retired and are no longer available for purchase. The new grey tank bags not only offer a modernized look but also come with enhanced functionality to meet the evolving needs of airgun enthusiasts.
Important Information:
Intended Use: The products on Saber Tactical are intended for use on airguns and airgun accessories only. Using this product in a manner inconsistent with its intended purpose violates federal law.
DonnyFL
DonnyFL | YOKOZUNA Moderator Threaded Housing
$166.50
$185.00
Please note we are currently out of yokozuna boxes, they will be shipped inside of DonnyFL red tubes.
Product description
If you're a shooter who prefers leaving the same moderator on your airguns but wants the flexibility to customize the length, the DonnyFL YOKOZUNA is perfect. Its modular design allows you to lengthen or shorten the unit according to your dampening needs.
Key Features:
Precision Threads: The 1/2 x 20 threads are designed to seamlessly attach to the barrel of your airgun, ensuring a secure fit and optimal sound suppression performance.
Durable Construction: Crafted from high-quality materials, this airgun moderator is built to withstand the rigors of outdoor use. It's resistant to corrosion, abrasion, and extreme weather conditions.
Enhanced Safety: By reducing the noise generated by your airgun, you can enjoy a safer shooting environment and minimize noise pollution in your surroundings.
Improved Accuracy: The reduction in muzzle report enhances your shooting accuracy, making it easier to hit your target with precision.
Sleek Design: Features a sleek and stylish design that complements the aesthetics of your airgun, making you the envy of fellow shooters.
Easy Installation: The 1/2 x 20 threads make attaching and detaching the moderator a breeze. It fits most airgun barrels with these standard threads, allowing for a hassle-free setup.
Choosing the right size: If you are connecting directly to a threaded barrel, purchase the same size as your airgun. If you are connecting to a shrouded barrel to using an adapter, go one size up.
Specifications:
Dimensions: 1.6 inches (40.64mm) x 7.25 inches (184.15mm)
Weight: 10.3 oz
Why Choose DonnyFL?
Expert Craftsmanship: DonnyFL products are precision CNC machined by professional machinists, ensuring the highest quality and performance.
Innovative Design: Our moderators are designed with cutting-edge features to enhance your shooting experience.
Durability: Built with top-notch materials and finishes, DonnyFL products are made to last.
Customer Satisfaction: We prioritize customer satisfaction with reliable products and excellent customer service.
Saber Tactical
Saber Tactical | Arca Swiss Baricade Stop | ST0075
$53.99
$59.99
PRODUCT DESCRIPTION
The Saber Tactical ARCA Rail Barricade Stop – Your Shortcut to Precision and Performance!
Unlock the full potential of your ARCA rail-equipped gun with the Saber Tactical Barricade Stop – where innovation meets simplicity for the ultimate shooting experience.
Swift Installation, Unmatched Versatility: Our Barricade Stop effortlessly glides onto your gun's ARCA rail, ensuring a hassle-free setup. No complicated installations, no time wasted. Just slide it on, and you're ready to dominate the shooting range.
Precision at Your Fingertips: With a mere twist of the ergonomic Delrin handle, you gain full control over your shooting position. Tighten or loosen with ease to achieve the perfect balance and stability, adapting swiftly to changing shooting scenarios.
Built for Excellence: Crafted from the finest 6061 aluminum, this Barricade Stop is not only lightweight but also rugged, ensuring it can withstand the harshest conditions. The Delrin handle provides a comfortable grip, giving you confidence and control with every shot.
The Saber Tactical Advantage: Join the ranks of elite shooters who trust Saber Tactical for superior shooting accessories. We're dedicated to helping you achieve your shooting goals with the finest equipment available.
DonnyFL
Air Venturi Avenger Extender/Umarex Origin 1/2 x 20 Adapter #A70
$40.49
$44.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF**DOES NOT FIT ANY OF THE AVENGER X SERIES GUNS**
This version allows you to use a larger suppressor than the Tanto or KOI without having to remove it to fill the gun. Also redesigned to slide over the barrel to keep the barrel centered with the adapter. This reduces the chance of pellet clipping and improves accuracy.
Features:
Compatible with .177 caliber to .25
6061 Aluminum T6
Black anodized
1/2 x 20 male threads
*Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping.
Saber Tactical
FX IMPACT | Cheek Riser ST0001
$58.49
$64.99
Easy to install cheek riser for the FX Impact. Reuses the factory cheek rest.
Features
6061 Aluminum
Matte Anodized
Stainless Steel screws
DonnyFL
Airforce | Texan LSS Adapter A65
$35.99
$39.99
This adapter screws directly to the end of the factory Texan LSS shroud.
It has M18x1 male threads to pair with my big bore suppressors. Add an Emperor or Ronin to tame the beast!
Features:
6061 Aluminum
Matte black anodize
knurled thread protector
huben
Huben | GK1 Pistol Adapter
$22.49
$24.99
Adapter that allows you to connect a moderator to a GK1 Air Pistol.
Saber Tactical
Saber Tactical | FX Crown Chassis | ST0021
$540.00
$600.00
***THE NEW VERSION HAS A GAP THAT WILL NOT ALLOW FOR THE MAGNET ON THE FOLDING STOCK TO ENGAGE DUE TO THE DESIGN OF THE M-LOK RAIL***
Features:
Arca Swiss rail with a short Picatinny rail in front.
Arca Swiss rail with M Lok mounts.
Foldable stock magnetically secured.
Built-in detachable bag rider.
Adjustable cheek rest.
Our very popular adjustable buttstock.
QD sling mount holes are integrated into the stock on both sides.
Weighs about 6lbs.
DonnyFL
AEA | Challenger Series | .22/.25/.30 & .357 Moderator Adapters | #A81 & #A83
$35.99
$39.99
Adapters are threaded for attaching a moderator
*DOES NOT WORK WITH THE 32" CHALLENGER STANDARD OR BULLPUP. THE 32" DOES NOT HAVE A SHROUD AND A 1/2x20 UNF MODERATOR CAN BE SCREWED DIRECTLY ON WITHOUT A ADAPTER*
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Comes with knurled thread protector
For .30 caliber measure the OD of the threaded part of the front cap. It should be close to 28mm. May need to heat up the front cap with a heat gun or mini torch to loosen the thread locker.
DonnyFL
Benjamin Marauder Pistol (Prod) & Daystate Huntsman Regal Moderator Adapter #A17
$35.99
$39.99
Adapters are threaded for attaching a moderator
Thread: 1/2 x 20 UNF
Want to make your Prod quieter? You'll need this 1/2 x 20 adapter that will screw into the OEM shroud. The threads that screws into the shroud is 11/16 - 24.
The .25 Sumo 1/2 x 20 is my favorite suppressor for this gun. The .25 works great with the .22 and reduces the chance of pellet clipping. However, in order to fill this gun with the Sumo, you'll have to remove the suppressor. An alternative is to go with either the Tanto or KOI with cone rear cap.
*Highly recommend going with a caliber one size up to reduce the chance of pellet clipping.
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
DonnyFL
Hatsan Jet 1 & Jet 2 Adapter | A111
$35.99
$39.99
Features:
Any gun that needs a double-sided male adapter
Has through holes in the threads for easy tightening or loosening
Matte Black Anodize threads
.655 inches / 16.6 mm OD
Saber Tactical
FX Panthera Hunter top Rail - ST0072
$270.00
$300.00
PRODUCT DESCRIPTION
Upgrade your FX Panthera Hunter with a Saber Tactical top rail.Key Features:Versatile Design: The FX Panthera Hunter Top Rail is engineered to provide you with unprecedented versatility. The rail has a cut out section that could be remove to work with a 300cc front bottle without modifying the bottle's location. If you prefer to move the bottle to the rear and not have a front bottle, just place the cutout back to give you more arca rail on the bottom.MLOK Slots: The Panthera Top Rail and bridge come equipped with MLOK slots, providing you with endless options for attaching accessories such as scopes, grips, lasers, and more.Premium Material: Crafted from high-quality 6061 aluminum, the FX Panthera Top Rail is not only incredibly durable but also lightweight. The black anodized finish not only adds a sleek, tactical look to your rifle but also enhances its resistance to wear and tear.Easy Installation: Installing the FX Panthera Top Rail is a breeze. Its user-friendly design ensures a hassle-free installation process.
Weighs 1.2 lbs