DonnyFL
DonnyFL | FATBOY 2.0 Muzzle Brake
$26.99
$29.99
This muzzle brake or air stripper screws onto the front of the fat boy.
Note: This unit does not come with the individual air strippers. You can change the caliber size by using the inserts that was included with the fat boy.
Features:
Made of aluminum 6061 T6
Black anodize
Weights 2.9 oz
Add the optional 3 inch extender for the Fatboy to make it quieter!EXTENDER!
DonnyFL
DonnyFL | RYU Spare Baffles
$27.00
$30.00
Customize the size of your RYU or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up.
*The products on DonnyFL are INTENDED for use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.
DonnyFL
DonnyFL | Yokozuna Spare Baffles
$27.00
$30.00
Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up.
*The products on DonnyFL are INTENDED for use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.
DonnyFL
DonnyFL | Yokozuna Spare Extender
$27.00
$30.00
Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up.
*The products on DonnyFL are INTENDED for use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.
DonnyFL
EDGun | M14x1.25 To 1/2 x 20 Barrel Adapter A98
from $20.70
$23.00
Adapters are threaded for attaching a moderator
Thread: M14x1.25 to 1/2 x 20 UNF
This adapter is about 22mm OD x 38.30mm Length. It converts barrel threads from M14x1.25 to 1/2 x 20.
Works on EDgun Leshiy 2 (use with aluminum handguard to mount on bigger moderators)
Silver Does not come with a thread protector.
Features:
6061 T6 Aluminum
Silver (no anodize)
DonnyFL
Epoch Moderator Adapter #A112
$35.99
$39.99
Product description
If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with M18X1 threads.
Features:
6061 Aluminum
Black anodize
Knurled thread protector
Made for the .357 caliber Skout
Saber Tactical
Extended Dust Cap Cover ST0019
$8.99
$9.99
This extended dust cap makes it easier to get into those tight trigger guards. With this dust cap, you can easily remove without straining your finger muscles!
Features:
Made of aluminum 60601 with a strong magnet inside
Measures: 14mm outer diameter and just shy of 23mm long
DonnyFL
Extended Quick Disconnect 1/8 BSP #M20
$17.99
$19.99
This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts.
1/8 BSP male threads
Max 5000 psi (Do not exceed recommended pressure)
Release collar close to 1.20 inches long
Comes with sealed washer
Saber Tactical
FX IMPACT ARCA RAIL 2 ST0022
$143.99
$159.99
Similar to the first Arca Rail, however this one has T slots on the both sides allowing you to attach shooting accessories such as flashlight and laser. Edges are very smooth and makes it very comfortable to shoot offhand.
Features:
Aluminum 6061 T6
Hard black anodize
Arca Swiss Rail underneath with Picatinny at the end
Also has 1/4 x 20 threads for common camera tripod attachment
Includes an extended dust fill cap
Saber Tactical
FX IMPACT COMPACT ARCA RAIL ST0023
$134.99
$149.99
This compact arca swiss rail is great for the FX Impact with the short 300cc bottle. Makes the gun very comfortable to shoot off hand and allows you to attach your favorite shooting accessories such as a flashlight or laser pointer.
Features:
Aluminum 6061 T6
Hard black anodized
Arca swiss rail with picatinny at the end
1/4 x 20 threads for common photography tripod adapter
Saber Tactical
FX IMPACT LOW PROFILE 3 FULL ARCA SWISS RAIL
from $139.49
$154.99
***Also works for the Impact m4***
For those that do not need picatinny slots at the end of their rail, this one has full arca. Ideal for the 580cc and 700cc bottles.
Features:
MLok slots at the bottom and on both sides of the rail for add-on accessories.
Low profile, hugs closer to the bottle
Sling QD slots on both sides
6061 T6 Alluminum
Black anodize
From start of trigger guard until the end of rail is 15.75 inches x 2.75 inches wide
Includes an extended dust fill cap
Saber Tactical
FX IMPACT MAGNETIC ARM LOCK - ST0048
$31.50
$35.00
This magnetic arm lock help keep the cocking arm open. Useful during competition when you are required to keep the bolt open.
Features:
6061 T6 Aluminum
Black anodized
Stainless steel screw
Easy install
Weigh only 1oz
Installation instruction:
Highly recommend you remove the bottle
Fire the gun to remove any air in the plenum
Unscrew bolt in front of plenum. See picture 1
Install Magnetic Arm Lock
Saber Tactical
FX IMPACT QUICK DISCONNECT SLING ADAPTER ST0042
$18.00
$20.00
Easily attach this to the rear of your FX Impact M3 to use with a quick detach or straps for your sling.
DOES NOT WORK ON THE M4.
Features:
Made of hardened steel
Black anodize
Saber Tactical
FX IMPACT | Cheek Riser ST0001
$58.49
$64.99
Easy to install cheek riser for the FX Impact. Reuses the factory cheek rest.
Features
6061 Aluminum
Matte Anodized
Stainless Steel screws
Saber Tactical
FX IMPACT | EXTENDED PICATINNY RAIL ST0006
$134.99
$149.99
Do you need to extend the picatinny rail further on the Impact? Then this is the perfect add-on. Very sturdy and hardly any flex, also comes with an extended dust cap for your convenience.