Saber Tactical
Saber Tactical | 60MM BOTTLE CLAMP ST0004
$62.99
$69.99
If you're uneasy about drilling into your factory gun stock, this 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. Has rubber pads on the inside to prevent any marring to your bottle.
This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.
Features:
6061 T6 aluminum
Matte black anodize
Compatible with:
FX Carbon Fiber & Steel BottlesRAW (HM1000X, etc)Daystate (Redwolf, Airwolf, etc)Brocock (Commander, Bantam, etc)AEA HP Carbines (With Carbon Fiber Tanks)
DonnyFL
Hatsan Bullmaster | Invader | Galatian 1/2 x 20 Moderator Adapter #A35
$35.99
$39.99
#A35 Adapter
1/2 x 20 UNF adapter for those rapid firing Bullmaster. New and improve design to allow more air flow.
Please note that when you add a suppressor to this gun, it does not properly index the magazine. It uses blowback air to advance the magazine however with a suppressor on, it over rotates and causes it to not properly index. If you plan to single load it'll work fine. Some customers have been able to get the gun to work properly by swapping out the spring inside the shroud with a different strength one. Will take trial an error.
Similar to the Blitz, this guy may need a lighter spring to work with a suppressor. I got mine from Ace hardware. See picture
Features:
Compatible up to .30 caliber
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
Saber Tactical
FX MAVERICK TRS RAIL
from $215.99
$239.99
Saber Tactical Top Tail Support (TRS)
Features:
Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting.
M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights.
Built in 20 MOA, giving your scope more elevation for long range shooting.
Has a Delrin shroud clamp to prevent shroud droop. It minimizes or eliminates any point of impact changes when switching suppressors.
Weight = .8 lb
Note* Highly recommend pairing with the Maverick Cheek riser ST0046
Saber Tactical
Saber Tactical | FX Impact M4 Cheek Riser ST0090
$54.00
$60.00
Important Note: This cheek riser is specifically designed to be used with the FX Impact M4 TRS Rail. It is not compatible with standard FX Impact configurations or stock setups.
Enhanced Comfort & Stability: The FX Impact M4 Cheek Riser by Saber Tactical is designed to elevate your shooting experience by providing superior comfort and stability. This easy-to-install cheek riser reuses the factory cheek rest, making it more comfortable for the shooter.
Key Features:
High-Quality Construction: Made from durable 6061 aluminum for long-lasting performance.
Matte Anodized Finish: Provides a sleek look and additional protection against wear and tear.
Stainless Steel Screws: Ensures a secure and stable installation.
DonnyFL
FX Wildcat Mag Holder M27
$22.50
$25.00
With Matt247365 from Airgun Nation's blessing, I am happy to offer these easy to install Wildcat mag holders. Compatible with .177 .22 .25 and .30 caliber. Your magazine clicks securely into the Mag holder using it’s own ball bearing and can rotate for easy loading with one hand while on the gun. As many as 4 Magholders can fit on the Wildcat at one time. You can mount 1, 2, 3 or 4 in a variety of configurations facing either to the front or to the rear and on either side or on both sides.
Features:
Made of 6061 T6 aluminum
black anodize
CNC machined
Uses 2.5 mm Hex key
Saber Tactical
Saber Tactical | AR STYLE GRIP WITH AMBIDEXTROUS THUMB REST - ST0049
$58.50
$65.00
For competitive shooters who do not like to wrap your thumb around the grip, this grip has a thumb rest that can be positioned on either side. You can also adjust the angle to your preference.
Note* The first shipment of grips are compatible with FX Impacts and most AR style grips. We've found that the FX Maverick has a thicker adapter and will not be compatible. We mark the first batch with a Yellow round sticker on the package.
Features:
6061 T6 aluminum
Black anodized
Skeletonize to reduce weight
Ambidextrous thumb rest
Weighs 6.0 oz
Saber Tactical
Saber Tactical | Pro Universal Bench Monopod | ST0069
$396.00
$440.00
Note: Requires a 2.5mm Allen key to adjust knob tension.
Key Features:
Precision in Motion: The Bench Rest Monopod allows you to effortlessly move up and down through your target with unparalleled ease, giving you the precision control needed to hit bullseyes consistently.
Slight Turning for Perfection: Achieve absolute accuracy with the ability to make slight turning adjustments, ensuring that you are always locked onto your target with pinpoint accuracy.
Competition-Ready: Designed with competitive shooting in mind, this monopod is the secret weapon for shooters looking to gain an edge. Dominate the range and impress your competitors with your newfound precision.
Rock-Solid Stability: Crafted from high-quality materials, the monopod ensures rock-solid stability, providing a stable shooting platform that enhances performance even in challenging conditions.
Quick and Easy Setup: The Bench Rest Monopod is quick and easy to attach, allowing you to spend more time focusing on your shots and less time fumbling with complicated gear.
Adjustable Tension: The tension on the turning wheels can be adjusted to your preference, allowing for a customized shooting experience.
Universal Design: Designed to be universal for most gun stocks, ensuring compatibility with a wide range of airguns and firearms.
Specifications:
Material: High-quality materials for durability and stability.
Compatibility: Universal design fits most gun stocks.
Adjustability: Tension on turning wheels can be adjusted for personalized performance.
DonnyFL
Huben GK1 Pistol Adapter | A116
$31.49
$34.99
Product description
This adapter allows you to add a 1/2 x 20 moderator or muzzle brake to your Huben GK1 Pistol.
Features:
6061 T6 Aluminum
Black Anodize
Knurled thread protector
Saber Tactical
Arca to Picatinny Adapter | ST0066
$58.49
$64.99
Perfect solution to convert your Arca Rail to Picatinny Adapter.
Features:
3.5 ounces
crafted from high-quality 6061 aluminum
2 inches x 1.95 inches
Saber Tactical
FX IMPACT QUICK DISCONNECT SLING ADAPTER ST0042
$18.00
$20.00
Easily attach this to the rear of your FX Impact M3 to use with a quick detach or straps for your sling.
DOES NOT WORK ON THE M4.
Features:
Made of hardened steel
Black anodize
DonnyFL
Skout | Epoch Moderator Adapter #A108
$35.99
$39.99
If you prefer not to use the factory Skout moderator, you can use this adapter to allow it to screw on a different moderator with 1/2 x 20 threads.
Features:
6061 Aluminum
Black anodize
Knurled thread protector
Compatible up to .30 caliber
DonnyFL
AEA | Challenger Pro Moderator Adapter M14x1 A100
$31.49
$34.99
Adapters are threaded for attaching a moderator
This end cap is for your Ronin or Emperor to screw directly onto the AEA Challenger pro shroud. It has a recess that helps center the barrel inside the shroud.
Features:
6061 T6 Aluminum
compatible with all Challenger Pro barrels
DonnyFL
DonnyFL | FATBOY 2.0 Muzzle Brake
$26.99
$29.99
This muzzle brake or air stripper screws onto the front of the fat boy.
Note: This unit does not come with the individual air strippers. You can change the caliber size by using the inserts that was included with the fat boy.
Features:
Made of aluminum 6061 T6
Black anodize
Weights 2.9 oz
Add the optional 3 inch extender for the Fatboy to make it quieter!EXTENDER!
Saber Tactical
Fx Panthera Front Bottle Adapter ST0056
$26.99
$29.99
The Saber Tactical Fx Panthera Front Bottle Adapter is designed for convenience. It allows you to attach a second bottle of compressed air to the front of your rifle, providing a really nice alternate placement option for your bottles. The adapter is constructed with stainless steel for durability and attaches easily to the front of your rifle, allowing both bottles to work in tandem for extended shooting sessions. Upgrade your shooting experience with the Saber Tactical Fx Panthera Front Bottle Adapter.
DonnyFL
Extended Quick Disconnect 1/8 BSP #M20
$17.99
$19.99
This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts.
1/8 BSP male threads
Max 5000 psi (Do not exceed recommended pressure)
Release collar close to 1.20 inches long
Comes with sealed washer