Products

DonnyFL DonnyFL | RYU Spare Baffles $30.00

Customize the size of your RYU or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up. *The products on DonnyFL are INTENDED for use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.

DonnyFL DonnyFL | SHOGUN Moderator $184.99

If you thought Sumo was quiet wait until you hear Shogun. Shogun is just like Sumo but 1.5 inches longer. Donny added an additional 1 inch chamber as well as increase the first expansion chamber by .5 inches and the chamber by the exit hole another .5 inches. This design is very effective. 1.6 x 8 inches Available in .25 and .30 calibers Available in 1/2x20 UNF, FX(20mm) & Vulcan Thread by request. Mono-core design to increase accuracy and limit the chances of pellet clipping No moving parts or epoxy that may become lose after 1000's of rounds Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit. Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. *Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.

DonnyFL DonnyFL | SUMO Moderator $149.99

One of the original and most popular moderators made by DonnyFL. Great balance between size and sound suppression ! 1.6 x 6.5 inches Mono-core design to increase accuracy and limit the chances of pellet clipping No moving parts or epoxy that may become lose after 1000's of rounds Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit. Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. *Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.

DonnyFL DonnyFL | TANTO Moderator $99.99

Features: 1.22 x 5 inches Available in .22/.25 and .30 Mono-core design Precision CNC’ed by professional machinist Sand blasted and anodized for maximum durability Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt or 1/2 x 20 Cone Comes pre-wrapped in felt Machined grooves on the outside for easy handling Tanto with cone endcap is 5.37 inches Weight: 1. With 1/2 x 20 Bolt rear end cap: 3.9 oz2. With 1/2 x 20 Cone rear end cap: 4.1 oz3. With M20x1 Bolt rear end cap: 3.5 oz*Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.

DonnyFL DonnyFL | TATSU Moderator $129.99

Tatsu or "Dragon" will be a great addition for shooters who need to take the bark out of their gun yet keep the overall length short. This is a smaller version of the popular Sumo. Features: 1.6 x 4.25 Available in .22/.25 and .30 Mono-core design to increase accuracy and limit the chances of pellet clipping No moving parts or epoxy that may become loose after 1000's of rounds Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit. Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight 4.1 oz *Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.

DonnyFL DonnyFL | YOKOZUNA Moderator $200.00

FEATURES:• Indexed locking system for consistent position and no point of impact changes.• Quick detachment for easy storage and reattachment for shooting.• Comes with a 1/2 x 20 female (barrel/shroud) thread adapter.• Modular design for length adjustment.• Crafted from 6061 T6 aluminum (individual sections) and 7075 aluminum (main QD housing andadapter). •YOKOZUNA: has the same outer diameter as our Sumo 40.46mm or 1.6 Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them.

Sold out

DonnyFL | YOKOZUNA Moderator Threaded Housing

DonnyFL DonnyFL | YOKOZUNA Moderator Threaded Housing $185.00

Product description If you're a shooter who prefers leaving the same moderator on your airguns but wants the flexibility to customize the length, the DonnyFL YOKOZUNA is perfect. Its modular design allows you to lengthen or shorten the unit according to your dampening needs. Key Features: Precision Threads: The 1/2 x 20 threads are designed to seamlessly attach to the barrel of your airgun, ensuring a secure fit and optimal sound suppression performance. Durable Construction: Crafted from high-quality materials, this airgun moderator is built to withstand the rigors of outdoor use. It's resistant to corrosion, abrasion, and extreme weather conditions. Enhanced Safety: By reducing the noise generated by your airgun, you can enjoy a safer shooting environment and minimize noise pollution in your surroundings. Improved Accuracy: The reduction in muzzle report enhances your shooting accuracy, making it easier to hit your target with precision. Sleek Design: Features a sleek and stylish design that complements the aesthetics of your airgun, making you the envy of fellow shooters. Easy Installation: The 1/2 x 20 threads make attaching and detaching the moderator a breeze. It fits most airgun barrels with these standard threads, allowing for a hassle-free setup. Choosing the right size: If you are connecting directly to a threaded barrel, purchase the same size as your airgun. If you are connecting to a shrouded barrel to using an adapter, go one size up. Specifications: Dimensions: 1.6 inches (40.64mm) x 7.25 inches (184.15mm) Weight: 10.3 oz Why Choose DonnyFL? Expert Craftsmanship: DonnyFL products are precision CNC machined by professional machinists, ensuring the highest quality and performance. Innovative Design: Our moderators are designed with cutting-edge features to enhance your shooting experience. Durability: Built with top-notch materials and finishes, DonnyFL products are made to last. Customer Satisfaction: We prioritize customer satisfaction with reliable products and excellent customer service.

DonnyFL DonnyFL | Yokozuna Spare Baffles $30.00

Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up. *The products on DonnyFL are INTENDED for use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.

DonnyFL DonnyFL | Yokozuna Spare Extender $30.00

Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up. *The products on DonnyFL are INTENDED for use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.

Sold out

Eagle Vision Infinity Adjustable INS Rings | PICATINNY

Eagle Vision Eagle Vision Infinity Adjustable INS Rings | PICATINNY $89.99

PICATINNY RAIL Eagle Visions infinity adjustable scope rings are extremely high quality and beautifully finished. Designed with the goal of adjustability and range, these scope rings have a wide range of movement. You will no longer have to decide between high or low rings. This also eliminates the problem of long-range shooters running out of elevation clicks on their scope turrets. Eagle Vision Infinity adjustable scope rings are a must have for any air gunner! Includes a custom waterproof accessory carrying case. *Recommended for FX Crown Airguns to clear the magazine height. Specifications 30 MM Hight: 60.7mm to 65.7mm (adjustable) Profile Hight: 21mm Adjustable Height: 4.5mm. Weight: 86g each one. Centre of the ring to the bottom of the rail: 36mm (in closed position). Centre of the ring to the bottom of the rail: 40.5mm (in open position). Ring size: 30mm Specifications 34 MM Hight: 65mm to 69.5mm (adjustable|). Profil Hight: 21 mm. Adjustable Height: 4.5mm. Weight: 92 g each. Centre of the ring to the bottom of the rail: 38mm (in closed position). Centre of the ring to the bottom of the rail: 42.5mm (in open position). Ring size: 34mm

Eagle Vision Infinity Adjustable IPS Rings | PICATINNY

Eagle Vision Eagle Vision Infinity Adjustable IPS Rings | PICATINNY $89.99

PICATINNY RAIL Eagle Visions infinity adjustable scope rings are extremely high quality and beautifully finished. Designed with the goal of adjustability and range, these scope rings have a wide range of movement. You will no longer have to decide between high or low rings. This also eliminates the problem of long-range shooters running out of elevation clicks on their scope turrets. Eagle Vision Infinity adjustable scope rings are a must have for any air gunner! Equipped with extra picatinny rails on top for mounting accessories. Includes a custom waterproof accessory carrying case. *Recommended for FX Crown Airguns to clear the magazine height. Specifications 30 MM Height: 68.25 mm to 77.75 mm (adjustable) Profile Height: 23 mm Adjustable Height: 9.5 mm Weight: 81 g each Centre of the ring to the bottom of the rail: 41 mm (in closed position) Centre of the ring to the bottom of the rail: 51.5 mm (in open position) Ring size: 30 mm Rail size: 20 mm picatinny Specifications 34 MM Height: 68.25mm to 77.75 mm (adjustable) Profile Hight: 23 mm Adjustable Height: 9.5mm Weight: 81 g each Centre of the ring to the bottom of the rail: 41mm (in closed position). Centre of the ring to the bottom of the rail: 51.5mm (in open position). Ring size: 34mm Rail size: 20mm picatinny

Sold out

Eagle Vision Eagle Vision | 75% X 25% GOPRO 5,6,7 Black, Firefly S8E | Universal Scope Holder Side-Cam kit $289.00

ou may use the ‘Firefly S8E’ with a 90 degree lens, (without any modification / changing the lens), directly with this kit – Secure the camera to ‘GoPro’ housing with the supplied nylon screws. The only downside you don’t have fully access to power bottom (one third its accessible) you may need to press that with something like pen. This Kit includes: 1x Side-Cam 75% to camera, (reflection), 25% passed to your eye, (transmission) system including a rubber ring and a 0 coil eye rubber cap. Ideal for a professional who aims for better quality of recording. 1x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scope from an outer scope diameter between 40mm-46.5mm. It will find the centre automatically while you are tightening it.1x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5,6 and 7 to your side cam (please note; you are not be able to use your action camera directly without changing the lens to 12mm or 16mm Focal). 1x Case The new waterproof case will allow you to store your camera mounting system tidy and safe. 1x Lens Air Pump Dust Blower For maintenance of the Side-Cam. What’s the difference betweenthe 1/1.8 and the 1/2.3 lenses? Both lenses are 4K The 1/1.8 allows more light in.The downside is that you cannot close the ‘GoPro’ lens cover and it’s more expensive. The 1/2.3 lenses allow less light through.The upside is you can close the lens cover and it’s less expensive. Here are some valuable tips to help you record the best quality video: 1. Use a good scope with a decent lens and larger objective. 2. Use a high quality camera for recording;any action camera with a minimum HD ready at 240FPS is preferable. 3. Obtain a good quality fixed camera lens. 4. Ensure that the scope and camera are set up correctly. 5. Use lower magnification with the scope, you will notice improved quality by using a fixed magnification, eg. 10×44(We do not recommend over x 10 magnification with most common scopes on the market). 6. An optical zoom is preferred over digital zoom, which makes a lower image quality.

22 (5.5mm) – 18 shot (with magnetic lid) ** PELLETS ONLY- NOT FOR SLUGS** We’ve added some improvements such as: Easier to load Holds pellets more securely Smoother rotation Numbered magazine shot count Maximum Pellet length 11.5mm flat head 12mm dome head Magazine height: 49mm Fits the following rifles: Dreamline (all models) Maverick Crown Bobcat MK3 ***ALL SALES ARE FINAL ON THESE MAGS***

Eagle Vision | FX Magazine | Dreamline | Maverick | Crown | wildcat MK3

Fits the following rifles: Dreamline (all models) Maverick Crown Bobcat MK3 Easier to load Holds pellets more securely Smoother rotation Numbered magazine shot count .22 Cal (5.5mm) – 18 shot (with magnetic lid) .25 Cal (6.35mm) – 16 shot (with magnetic lid) Maximum Pellet & slugs length 11.5mm flat head 12mm dome head please note: this magazine are designed to be load one at the time by rotate the round pellet holder in the centre you need to ~ ensure you block the hole from underneath with your finger.some caliber like 177 and 22 can remove the magnetic cover to load like new Fx magazine with short pellets. ***ALL SALES ARE FINAL ON THESE MAGS***

Sold out

Eagle Vision | FX Magazine | FX Impact High Capacity Magazine

Eagle Vision Eagle Vision | FX Magazine | FX Impact High Capacity Magazine $113.99

Please note:this magazine is designed for slugs only. You may fit a pellet on them if the pellet diameter is not less than 5.70mm (we don’t guarantee). The spring’s tension is set to 2 full turns for slugs. If you are using soft lead pellet you may need to reduce attention to 1 to 1.25 of a turn. You may be unable to fit our magazines to your gun If you are using after market non standard or non factorry original part such as Brass Inlet Transfer Port . Before purchase this you need to make sure all your rifle part is original. We do not accept return if magazines get dent or scratched for that reason. This is a high capacity magazine, designed for the FX Impact platform. It is made from aluminium and cut by CNC machine. Improvements include: Magnetic cover Higher capacity Easy load Secure pellet retention Very smooth rotation Numbered shot count 22 (5.5mm) – 27 shots 25 (6.35mm) – 26 shots 30 (7.62mm) – 22 shots This package includes: 1 x 3mm Allen key6x rubber ball holder 1x waterproof storage case Please note: This product will not fit the early model FX Impacts (MK1/2) unless they have been fitted with the adapter plate to accept larger capacity magazines. ***ALL SALES ARE FINAL ON THESE MAGS***

Find anything you need

Fast Shipping

Quality Control

Mounting & Sighting