Products

DonnyFL Benjamin Marauder (Mrod) | Fortitude | Armada Moderator Adapter #A7 $39.99

Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF Marauders are great entry level PCP guns. Lots of mods you can do to make them more powerful. More power means a louder gun. To make it backyard friendly make sure to grab this 1/2 x 20 UNF Adapter to allow you to screw on an aftermarket LDC. Threaded end that goes into the OEM shroud is 13/16 - 28. *Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

DonnyFL Benjamin Marauder Pistol (Prod) & Daystate Huntsman Regal Moderator Adapter #A17 $39.99

Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF Want to make your Prod quieter? You'll need this 1/2 x 20 adapter that will screw into the OEM shroud. The threads that screws into the shroud is 11/16 - 24. The .25 Sumo 1/2 x 20 is my favorite suppressor for this gun. The .25 works great with the .22 and reduces the chance of pellet clipping. However, in order to fill this gun with the Sumo, you'll have to remove the suppressor. An alternative is to go with either the Tanto or KOI with cone rear cap. *Highly recommend going with a caliber one size up to reduce the chance of pellet clipping. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

DonnyFL Benjamin Marauder Pistol (Prod) Extended Adapter #A78 $44.99

Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF This adapter extends the shroud 1.5 inches or about 38.1mm. Pair it up with a .22-25 Tanto 1/2 x 20 Bolt #S69 and this pistol will be very quiet. No need to remove the suppressor to fill the gun. Features: 6061 Aluminum Black anodized Comes with knurled thread protector

Black Arts Design Black Arts Design | AEA SF Series AR Style Grip Adapter (with hardware kit) $39.00

Description The Black Arts Design AEA SF Series AR Style Grip Adapter allows shooters the flexibility to install an AR Style grip of their preference. After all, grips are like pens, everyone has their favorite. The grip adapter installs with one M5 screw and keys into the HP’s trigger guard for a rock solid attachment point for your selected grip. Requires use of the industry standard 1/4×28 screw for AR style grip attachment. *** Rigid beaver tail grips are not compatible. However, flexible beaver tail grips such as the Ergo Air grips can be used with the grip adapter*** ***Optional: Grip Installation Hardware Kit• ¼-28 x 1” Slotted Pan Head Machine Screw and Star Lock Washer Material• CNC machined 6061-T6 aluminum with a Type II anodized finish. Features• Simple and quick install.• Designed to key into the trigger guard for a solid and secure attachment point. Installation Instructions: https://blackartsdesign.com/aea-hp-sf-series-ar-style-grip-adapter-installation/

Brocock Brocock | BRK Ghost | CARBINE $2,449.99

Specification MODEL HUMA REG CALIBRES SHOTS PER CHARGE 12ftlb (16J) MAX ENERGY ftlb (JOULES) SHOTS PER CHARGE AT MAX POWER LENGTH mm WEIGHT kg CARBINE Yes .177” (4.5mm 290 14-18 (19-25) 120 655 3.1 CARBINE Yes .22" (5.5mm) 300 25-35 (34-47) 130 655 3.1 Extra BRK Magazines

Brocock Brocock | BRK Ghost | HP $2,449.99

Specification MODEL HUMA REG CALIBRES SHOTS PER CHARGE 12ftlb (16J) MAX ENERGY ftlb (JOULES) SHOTS PER CHARGE AT MAX POWER LENGTH mm WEIGHT kg HIGH POWER Yes .177” (4.5mm N/A 26-31 (35-42) 100 855 3.4 HIGH POWER Yes .22" (5.5mm) N/A 49-65 (66-88) 40 855 3.4 HIGH POWER Yes .25" (6.35mm) N/A 56-70 (76-95) 29 855 3.4 HIGH POWER Yes .30" (7.62mm) N/A 70-95 (95-129) 21 855 3.4 Extra BRK Magazines

Brocock Brocock | BRK Ghost | PLUS $2,449.99

Specification MODEL HUMA REG CALIBRES SHOTS PER CHARGE 12ftlb (16J) MAX ENERGY ftlb (JOULES) SHOTS PER CHARGE AT MAX POWER LENGTH mm WEIGHT kg PLUS Yes .177” (4.5mm 430 14-18 (19-25) 150 731 3.2 PLUS Yes .22" (5.5mm) 450 30-45 (45-61) 150 731 3.2 Extra BRK Magazines

Brocock Brocock | BRK HP Barrel Kit $597.45

Specifications -HP Models-23" Length-Includes Barrel & Probe-Does not include magazine BRK Magazines Click Here

Black Arts Design Carbon Fiber 52mm Tri-Rail | Black Arts Design $149.99

The 52mm Carbon Fiber Tri-Rail is an accessory mounting system with unparalleled stability and versatility in an incredibly lightweight package. Weighing in at an amazing 1.95 oz. (56 grams), without sacrificing any strength, it provides the versatility to be adapted to any shooting situation from bench to field thanks to the use of the M-Lok system. From picatinny to swiss- arca, flashlights to sling swivels the choice is yours. The carbon fiber clamping body measures under .7mm in thickness ensuring it will not put upward pressure on your barrel even on the Challenger Pro and Zeus models. Only compatible with airguns utilizing a 52mm air tube Materialo Clamp Body - Aerospace grade carbon fibero Clamping base components - hard anodized 6061-T6 aluminum Featureso Rock Solid attachment to Air Tubeo Low Profile Designo M-Lok slots at 3, 6, and 9 O'clock positions providing limitless options foraccessory attachmentso Lightweight - 1.95 Ounces (56 grams)o Flat surfaces at 3, 6, and 9 O'clock -Provides flat stable faces for use with saddlemounts - 5 Slot Picatinny Rail with QD sling mount. Hard anodized6061-T6 Aluminum

Black Arts Design Challenger Elite .35 Cal | Barrel Band $52.00

The Black Arts Design AEA Challenger Elite Barrel Band (AKA Barrel Support Stabilizer) is designed to increase POI consistency and eliminate barrel droop. The split design allows install without removal of the factory muzzle break. Two large channels are built into the barrel band to accept TPU (a rubberized plastic) bushings. These bushings give way just enough to permit an easy install while still providing a tight fit and provide dampening characteristics. The three M3 screws provide a secure fitment. ***Fits only the .35 caliber Challenger Elite*** For the .45 | .50 | .510 caliber follow this link: https://www.thepelletshop.com/products/challenger-elite-45-510-cal-barrel-band?_pos=3&_psq=elite%20&_ss=e&_v=1.0 Material Carbon Fiber filled PETG – PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fiber increases flexural modulus (stiffness) well above standard PETG and further increases dimensional accuracy. TPU – A rubberized plastic with dampening characteristics. Features Robust design built for strength and stiffness. Two internal TPU (rubberized plastic) bushings are built into the barrel section. These bushings function as dampeners and provide an uncompromised fit. Our split design allows installation without removing the muzzle break. The cap head screws are secured using a captive nut for a clean appearance. Bolstered ridge along circumference of Barrel Band increases flexural modulus (stiffness) and aesthetic appeal. Installation Instructions: https://blackartsdesign.com/aea-challenger-elite-barrel-band-install/

Black Arts Design Challenger Elite .45 / .50 / .510 Cal | Barrel Band $52.00

The Black Arts Design AEA Challenger Elite Barrel Band (AKA Barrel Support Stabilizer) is designed to increase POI consistency and eliminate barrel droop. The split design allows install without removal of the factory muzzle break. Two large channels are built into the barrel band to accept TPU (a rubberized plastic) bushings. These bushings give way just enough to permit an easy install while still providing a tight fit and provide dampening characteristics. The three M3 screws provide a secure fitment. ***Fits only the .45, .50, and .510 caliber Challenger Elite*** For the .35 caliber, please click on the following link: https://www.thepelletshop.com/products/challenger-elite-barrel-band?_pos=2&_psq=elite&_ss=e&_v=1.0 Material Carbon Fiber filled PETG – PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fiber increases flexural modulus (stiffness) well above standard PETG and further increases dimensional accuracy. TPU – A rubberized plastic with dampening characteristics. Features Robust design built for strength and stiffness. Two internal TPU (rubberized plastic) bushings are built into the barrel section. These bushings function as dampeners and provide an uncompromised fit. Our split design allows installation without removing the muzzle break. The cap head screws are secured using a captive nut for a clean appearance. Bolstered ridge along circumference of Barrel Band increases flexural modulus (stiffness) and aesthetic appeal. Installation Instructions: https://blackartsdesign.com/aea-challenger-elite-barrel-band-install/

Black Arts Design Challenger Pro | Barrel Band $49.99

The Black Arts Design Barrel Band, AKA Barrel Support Stabilizer, reduces the likelihood of POI shifts from bumps to the barrel and ends barrel droop induced by moderators. Our Gen2 barrel shroud section houses two TPU bushings. These bushings allow for a very snug fit but still allow a no hassle installation. The lower section clamps to the air tube with two M3 screws providing substantial resistance to movement. Material: - Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, andhigh dimensional accuracy. The addition of carbon fibers increases flexural modulus(stiffness) well above standard PETG.- TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant toabrasion. Features: -The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation.- TPU has rubber like characteristics adding dampening qualities to our barrel band.- No grub screws! The lower section clamps securely with two alloy steel screws and nuts.Nuts are held captive within internal slots providing a secure hold while maintaining aclean appearance.- Bolstered design along the circumference increases flexural modulus (stiffness) andaesthetic appeal.

AEA Precision Airguns Challenger Series | Bullpup 24" Air Rifle from $575.00

**The .35 cal version does NOT have a power wheel adjuster, it is only available on the .22 - .30 cal model ** FOR AEA CHALLENGER SERIES DONNYFL MODERATOR ADAPTERS CLICK HERE

Challenger Series | Bullpup BIG BORE (Side Lever) Air Rifle

AEA Precision Airguns Challenger Series | Bullpup BIG BORE (Side Lever) Air Rifle $725.00

New .510 Cal comes with a update valve that produces up to 650 FPE. Up to 1000 FPS with 300 Gr slugs. Correct weight is 13 Lbs***

Sold out

AEA Precision Airguns Challenger Series | Standard 24" Air Rifle from $395.00

FOR AEA CHALLENGER SERIES DONNYFL MODERATOR ADAPTERS CLICK HERE **The .35 cal version does NOT have a power wheel adjuster, it is only available on the .22 - .30 cal model **

Find anything you need

Fast Shipping

Quality Control

Mounting & Sighting