Products

Athlon Optics Athlon | Cronus G2 20-60x86 Spotting Scope $999.99 $1,249.99

You’ll catch every detail with Athlon’s latest spotting scope. Featuring a smooth single focus wheel, finely geared to facilitate hitting the sharpest focus. The Cronus G2 offers greater color definition, clarity, and light transmission than its brethren. From scouting game on a shadowed treeline to identifying birds in dimly wooded forests, the Cronus G2’s enhanced contrast helps separate your subject from its background.APOCHROMATIC LENS SYSTEMHelps in converging refracting colors into one focus point, producing greater contrast, sharpness, and color definition.UHD GLASSGives you an advantage with an image that has little or no chromatic fringe for the clearest and sharpest image.ESP DIELECTRIC COATINGReflects over 99% of the light to your eyes bringing you a clear, bright image and accurate color reproduction. Specifications GENERAL Magnification Factor 20-60x Objective Size 86.0 mm Eye Relief 20-18mm Close Focus 26.2' Angular Field of View 2.1-1.1° Linear Field of View 37-20m at 1000m Coating ESP Dielectric Prism Type BaK-4 Tripod Adapted Yes Weather Protection Waterproof Classification Bird / Nature Hiking / camping PHYSICAL CHARACTERISTICS Weight 73.5 oz Dimensions 16.2" x 6.5" Color Black

-21% sale

Athlon | Laser Range Finder | Midas G2 1 Mile

Athlon Optics Athlon | Laser Range Finder | Midas G2 1 Mile $289.99 $362.49

FULLY MULTI-COATED Athlon Optic’s fully multi-coated glass gives you better light transmission with optimum brightness and true color across the entire light spectrum. RAINPROOF Don’t let unexpected showers, slow you down. While not submersible, rainproof optics will shed water in the harshest conditions, so you can push forward. RUBBER ARMOR Rubber Armor is applied to the chassis, giving additional protection and a durable, secure, non-slip soft texture grip for any weather condition All Features: FULLY MULTI-COATED LENSES NITOGREN PURGING OLED ILLUMINATING DISPLAY 5 ILLUMINATION SETTINGS RAINPROOF RUBBER ARMOR DIOPTER ADJUSTMENT ANGLE COMPENSATION MODE LINE OF SIGHT MODE SCAN MODE HUNTING AND GOLF MODE DUAL UNITS OF MEASUREMENT OF DISTANCE (M/Y) Ranging Reflective: 5 - 1760 y FOV ANGULAR: 6 Degrees ACCURACY: +/- .5 y BATTERY: CR2-3V

Athlon Optics Athlon | Precision Rings | 34mm Medium Height $119.99

Athlon Precision Rings are made from High Strength Aluminum Alloy. Designed for precision rifles including magnum calibers.A four screw ring cap design paired with a single nut base and recoil lug cross-bolt. A scalloped profile increases the surface area in the rings flex points while reducing mass, ensuring these rings will hold your scope tight!

Sold out

Atlas Bipod CAL Series | BT65-LW17 (Gen 2) | Picatinny Mount | With QD

Accu-Shot Atlas Bipod CAL Series | BT65-LW17 (Gen 2) | Picatinny Mount | With QD $299.95

With American Defense Quick Disconnect The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature. The BT65-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.” Read how to adjust the Pod-Loc™ lever below. Height Range: 5.1 - 9.4" (6.6” at 90°) Preloaded Cant: 45 degrees Position Button 0.5" diameter 5 leg positions: 0, 45, 90, 135 & 180 degrees Non-Rotating Legs: outer leg does not rotate around inner leg Larger, stronger inner legs Weight: 14.57 ounces Footprint: 9–12.5" Designed, Engineered, Machined and Assembled in America

Sold out

Atlas Bipod PSR Series | BT46-LW17 | Picatinny Mount | With QD

Accu-Shot Atlas Bipod PSR Series | BT46-LW17 | Picatinny Mount | With QD $319.95

With American Defense Quick Disconnect The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only. Selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System. NSN 1005-01-663-0038 Height Range: 5.2 - 9.6" (6.8” at 90°) Preloaded Pan: 30 degrees Preloaded Cant: 30 degrees Position Button 0.5" diameter Fore and Aft pivot limiting Bosses 5 leg positions: 0, 45, 90, 135 & 180 degrees Non-Rotating Legs: outer leg does not rotate around inner leg Larger, stronger inner legs Weight: 13.61 ounces approx. Footprint: 8–11" Designed, Engineered, Machined and Assembled in America

Sold out

Atlas Bipod V8 Series | BT10 | Picatinny Mount | w/o QD

Accu-Shot Atlas Bipod V8 Series | BT10 | Picatinny Mount | w/o QD $219.95

Without Quick Disconnect The BT10 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. Selected for SOCOM MK14 MOD 2. NSN 1005-01-601-000 Height Range: 4.8 - 9.1" (6.3” at 90°) Preloaded Pan: 30 degrees Preloaded Cant: 30 degrees Position Button 0.36" diameter 5 leg positions: 0, 45, 90, 135 & 180 degrees Weight: 11.0 ounces approx. Footprint: 8–11" Designed, Engineered, Machined and Assembled in America

Sold out

Atlas Bipod V8 Series | BT10-LW17 | Picatinny Mount | With QD

Accu-Shot Atlas Bipod V8 Series | BT10-LW17 | Picatinny Mount | With QD $279.95

With American Defense Quick Disconnect The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. NSN 1005-01-623-6257 Height Range: 5.2 - 9.6" (6.8” at 90°) Preloaded Pan: 30 degrees Preloaded Cant: 30 degrees Position Button 0.36" diameter 5 leg positions: 0, 45, 90, 135 & 180 degrees Weight: 12.7 ounces approx. Footprint: 8–11" Designed, Engineered, Machined and Assembled in America

Avenger | Regulated PCP Air Rifle | Bullpup II | Synthetic Stock

Air Venturi Avenger | Regulated PCP Air Rifle | Bullpup II | Synthetic Stock $419.99

Air Venturi Avenger Bullpup II, Regulated PCP Air Rifle Precharged pneumatic Forward mounted Sidelever Synthetic bullpup stock Built-in magazine storage compartments in stock Externally-adjustable regulator (up to 3,000 PSI/210 BAR) Easily-accessible hammer spring adjustment screw Two-stage adjustable trigger 180cc air cylinder Max. fill pressure: 4,351 PSI (300 BAR) Max. velocity: 1000 FPS (.177), 930 FPS (.22), 900 FPS (.25) Max. power: 22 FPE (.177), 34 FPE (.22), 45 FPE (.25) Fully shrouded barrel Three Picatinny rail sections on fore-end of stock Holes in front and rear of stock for mounting sling swivel studs Tool free vertically adjustable rubber buttpad Four position adjustable cheek piece Dual gauges – reg. pressure (RH Side) and fill pressure (LH Side) Male quick-disconnect fill fitting Easy access degassing screw Manual safety Picatinny optics rail Barrel length: 22.75" Overall length: 33" Magazine capacity: 10 rds. (.177 & .22), 8 rds. (.25) Includes two magazines and single-shot tray

Avenger | Regulated PCP Air Rifle | Synthetic Stock

Air Venturi Avenger | Regulated PCP Air Rifle | Synthetic Stock $399.99

FOR AIR VENTURI AVENGER DONNYFL MODERATOR ADAPTERS CLICK HEREAir Venturi Avenger High end features at an entry-level price, the Avenger sets a new standard for similarly priced PCP’s to live up to. Featuring an externally adjustable regulator and externally adjustable hammer spring, the Avenger provides the user a seemingly infinite amount of performance adjustability never seen at this price point. A smooth sidelever action allows for quick follow up shots, and the fully shrouded barrel keeps your shooting quiet. Available in .177 / .22 / .25 Pre-Charged Pneumatic Sidelever Cocking Synthetic Stock Externally Adjustable Regulator (Up to 3,000 PSI / 210 BAR) Easily accessible Hammer Spring Adjustment Screw Two-Stage Adjustable Trigger Max Fill Pressure: 4,351 PSI (300 BAR) Fully Shrouded Barrel Picatinny Rail on Fore-end of stock Holes in front and rear of stock for mounting swivel studs for a sling Dual Gauges - Reg Pressure (RH Side) and Fill Pressure (LH Side) Male Quick Disconnect Fill Fitting Easy Access Degassing Screw Manual Safety 11mm dovetail/weaver combination scope rail Magazine Capacity: 10 rds. (.177 & .22), 8 rds. (.25) Includes two magazines and single shot tray

Avenger | Regulated PCP Air Rifle | Wood Stock

Air Venturi Avenger | Regulated PCP Air Rifle | Wood Stock $449.99

FOR AIR VENTURI AVENGER DONNYFL MODERATOR ADAPTERS CLICK HEREAir Venturi Avenger High end features at an entry-level price, the Avenger sets a new standard for similarly priced PCP’s to live up to. Featuring an externally adjustable regulator and externally adjustable hammer spring, the Avenger provides the user a seemingly infinite amount of performance adjustability never seen at this price point. A smooth sidelever action allows for quick follow up shots, and the fully shrouded barrel keeps your shooting quiet. Available in .177 / .22 / .25 Pre-Charged Pneumatic Sidelever Cocking Wood Stock Externally Adjustable Regulator (Up to 3,000 PSI / 210 BAR) Easily accessible Hammer Spring Adjustment Screw Two-Stage Adjustable Trigger Max Fill Pressure: 4,351 PSI (300 BAR) Fully Shrouded Barrel Picatinny Rail on Fore-end of stock Holes in front and rear of stock for mounting swivel studs for a sling Dual Gauges - Reg Pressure (RH Side) and Fill Pressure (LH Side) Male Quick Disconnect Fill Fitting Easy Access Degassing Screw Manual Safety 11mm dovetail/weaver combination scope rail Magazine Capacity: 10 rds. (.177 & .22), 8 rds. (.25) Includes two magazines and single shot tray

Benjamin Bulldog .357 Cal Moderator Adapter w/ thread protector #A41

DonnyFL Benjamin Bulldog .357 Cal Moderator Adapter w/ thread protector #A41 $44.99

Adapters are threaded for attaching a moderator Thread: M18 x 1 The new adapter have finally arrived. This new design goes back to the barrel and slides over the barrel bushing. This will keep the barrel aligned with the adapter's exit hole. Please note that the barrel bushing is not included. The .357 Benjamin Bulldog is becoming popular for big game hunting. Add this adapter and pair it up with a .357 Ronin or .357 Emperor to make it the ultimate hunting airgun. The factory gun already has the barrel bushing. I took mime off to show how it fits into the adapter in the picture. Made by CNC for accuracy Very easy to install. Remove the top and bottom screw securing the front cap and swap it out for this adapter. Screw the two screws back in and you're done. No need to remove the shroud. Matte Black anodize Knurled thread protector When putting this on, press the adapter into the shroud as you tighten the two screws. This will ensure the adapter is flush with the shroud.

DonnyFL Benjamin Marauder (Mrod) | Fortitude | Armada Moderator Adapter #A7 $39.99

Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF Marauders are great entry level PCP guns. Lots of mods you can do to make them more powerful. More power means a louder gun. To make it backyard friendly make sure to grab this 1/2 x 20 UNF Adapter to allow you to screw on an aftermarket LDC. Threaded end that goes into the OEM shroud is 13/16 - 28. *Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

DonnyFL Benjamin Marauder Pistol (Prod) & Daystate Huntsman Regal Moderator Adapter #A17 $39.99

Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF Want to make your Prod quieter? You'll need this 1/2 x 20 adapter that will screw into the OEM shroud. The threads that screws into the shroud is 11/16 - 24. The .25 Sumo 1/2 x 20 is my favorite suppressor for this gun. The .25 works great with the .22 and reduces the chance of pellet clipping. However, in order to fill this gun with the Sumo, you'll have to remove the suppressor. An alternative is to go with either the Tanto or KOI with cone rear cap. *Highly recommend going with a caliber one size up to reduce the chance of pellet clipping. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

DonnyFL Benjamin Marauder Pistol (Prod) Extended Adapter #A78 $44.99

Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF This adapter extends the shroud 1.5 inches or about 38.1mm. Pair it up with a .22-25 Tanto 1/2 x 20 Bolt #S69 and this pistol will be very quiet. No need to remove the suppressor to fill the gun. Features: 6061 Aluminum Black anodized Comes with knurled thread protector

Black Arts Design Black Arts Design | AEA SF Series AR Style Grip Adapter (with hardware kit) $39.00

Description The Black Arts Design AEA SF Series AR Style Grip Adapter allows shooters the flexibility to install an AR Style grip of their preference. After all, grips are like pens, everyone has their favorite. The grip adapter installs with one M5 screw and keys into the HP’s trigger guard for a rock solid attachment point for your selected grip. Requires use of the industry standard 1/4×28 screw for AR style grip attachment. *** Rigid beaver tail grips are not compatible. However, flexible beaver tail grips such as the Ergo Air grips can be used with the grip adapter*** ***Optional: Grip Installation Hardware Kit• ¼-28 x 1” Slotted Pan Head Machine Screw and Star Lock Washer Material• CNC machined 6061-T6 aluminum with a Type II anodized finish. Features• Simple and quick install.• Designed to key into the trigger guard for a solid and secure attachment point. Installation Instructions: https://blackartsdesign.com/aea-hp-sf-series-ar-style-grip-adapter-installation/

Find anything you need

Fast Shipping

Quality Control

Mounting & Sighting