Products

FX FX | Complete Reseal Kit for Maverick/Wildcat MK3 $59.99

FX Airguns FX | Dynamic Compact $1,899.99

FX Dynamic Compact *The .177 and .22 caliber options have a 300mm barrel and can be broken down to fit in the smaller FX case. *The .25 caliber option (not pictured) is only available in a 380mm barrel length and comes in a larger, more traditional gun case. The FX Dynamic Compact features a 300mm barrel (note: the .25 caliber version is a 380mm barrel) and is a streamlined version of the acclaimed FX Dynamic, designed for hunters. Like its longer counterparts, this model features a plenum surrounding the barrel for improved harmonics and accuracy. It can be disassembled and stored in its supplied case. Small yet powerful, this airgun includes a 480cc carbon fiber bottle, a compact Arca rail, and a built-in Picatinny rail, offering versatile setup options. This version of the Dynamic excels in hunting, boasting higher air capacity and more field-friendly configurations than its competition-focused counterpart, the FX Panthera. Its one-piece, short-impulse/high-power balanced valve delivers efficient and precise air release, achieving low single-digit standard deviations. The innovative Over-The-Barrel Power Plenum, unique to FX, allows for consistent regulated pressure while enhancing barrel rigidity. The perfect woods walker for the hunter looking for an exceptional balance of power and size, the Dynamic Compact will surely be a favorite.

FX Airguns FX | FULL POWER BLOCK / POWER PLENUM Upgrade Kit $219.99

*This kit is for PRE M3 Impacts (Gen 1, Impact X, Impact MK2) As much as the power plenum stages the power capabilities of the Impact, the rear block handles that transfer of power much like a hot-rodded car’s ported and polished intake manifold. This new valve house allows better air flow, efficiency, and power potential. The Power Block works best for higher power, especially those shooting heavy slugs, allowing higher speeds and power.

Sold out

FX FX | Keller Digital Gauge $179.99

The FX Keller Digital Gauge, also known as Manometer, is a digital pressure gauge replacement for the FX Impact M3 PCP Air Rifle. It features incredible accuracy and consistency in a digital display format, making it essential for fine-tuning the air rifle's accuracy. The lithium battery is easy to swap and will last up to three years. FX Keller Digital Manometer Replaces factory gauges. lithium battery with up to 3 years of use and can be easily replaced. Works with FX Impact M3 models.

fx FX | Pocket Chronograph V2 $249.99

The revolutionary pocket radar chronograph just got upgraded! The original FX Chronograph changed airguns by providing the most important tool a modern shooter must have, in a compact, portable unit. Now FX Airguns is pleased to introduce the even smaller and improved FX Pocket Chronograph v2. The v2 Pocket Chronograph is more pocket sized than ever at just under the size of a 2” cube. It now has an internal battery that is recharged through an included USB-C cord. Multiple mounts are also included that allows the shooter to attach the chronograph to their rifle in multiple ways. The chronograph itself is a wireless radar-based chronograph. It communicates via Bluetooth to either your smart phone or the FX Chrono-graph Display (sold separately). The app (available for both iOS and Android) does more than just show the feet per second of the projectile. It allows users to store multiple rifle profiles, shows shot strings, standard deviations, extreme spreads and much more. The chronograph itself can be used for more than just airguns. Any projectile travelling under 1250 FPS can be accurately measured. This includes subsonic rifles, pistols, CO2 air rifles, paintball and more. Since the FX Pocket Chronograph v2 uses radar technology, it will work in any weather conditions, even complete darkness. Unlike other chronographs, no external light sources are needed. Simply attach the chronograph, open the FX Radar app on your phone, and start shooting! • USB-C Rechargable• Less than 2” x 2”• Picatinny Mount or Bracket mount Specifications Size L 50 x W 39 x H 60mmWeight 78 gram / 0,16 lbsInterface BluetoothSmart App iOS & AndroidMeasurement Tech Doppler RadarVelocity Range up to 1250 fpsPower Source USB-C RechargableMount Picatinny or Bracket Warranty 1 year limited

Sold out

FX Airguns FX | STX Superior Liner (Pellet) $109.99

The groundbreaking Smooth Twist X barrel liner has been further perfected. FX Airguns proudly introduces the new FX Superior Smooth Twist X Barrel Liner (or FX Superior STX). The new Superior STX barrel liners are still created using the patented way of pressing the rifling into the barrel from the outside; but this is now done with a higher degree of precision, lower tolerance, and some other slight modifications that result in a superior liner to the standard STX liners.

DonnyFL FX/DonnyFL Moderator $119.99

This is a custom size that comes with your FX guns if you decide to upgrade the suppressor. Same length as the Tanto but larger in diameter. The outer diameter is comparable to the FX factory suppressor. Features: 1.36 x 5 inches Available in .25 & 30 Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them. We don't recommend using this with the FX Panthera or FX Panthera Hunter.

Sold out

GRS GRS Bipod & Adapter Set $499.99

The new GRS bipod is a natural bi-product of their long-range commitment. This is a heavy-duty, rugged, yet simple to operate Bipod that can withstand whatever you throw at it. Made for when your shooting requires the utmost in stability and adjustability - The perfect match for bench rest and prone shooting. This Bipod was originally developed by GRS for F-Class ELR and similar long-range disciplines. With the recent optional extended Impact top rails offered by multiple manufacturers, this perfectly suited Bipod can enhance the accuracy you get from your FX Impact. The physics of accuracy gained by the GRS Bipod come through how the recoil effects your barrel when firing your rifle. By mounting a bipod over your barrel as opposed to under it, the recoil delivers straight back into the shooter instead of torquing at the bipod and recoiling up. With this wildly improved recoil management system, you remove the upwards recoil movement from effecting your shot, you can see your round better as well as making adjustments to your point of impact even faster! The Bipod mounts to the extended top rail via the GRS Spigot Adapter set (included in the Bipod with Adapter combo offered through airgun retailers). This set allows for the quick and effective mounting of the GRS Bipod to the Picatinny Rail. The spigot allows the bipod to pivot for uneven conditions in a real-world setting. The cant of the bipod can be locked and secured by using the reposition-able lock down lever.

H&N H&N Slug HP II .25 Cal | 120 pcs $11.99

Weight 0.1 lbs Dimensions 2 × 2 × 2 in Diameter/Grain .250/32gr, .250/34gr, .250/36gr, .249/28gr, .249/30gr, .249/32gr, .249/34gr, .249/36gr, .250/28gr, .250/30gr Calibers .25

H&N H&N | Slug HP Heavy | .22 cal $14.99

Product Details: Length Min Muzzle Energy Max Distance B.C. Tin Count Heavy Slug 34 gr- .217 9.6mm 18.5 ft.lbs 200 m 0.108 150 Heavy Slug 36 gr- .217 10.1mm 18.5 ft.lbs 200 m 0.109 150 Heavy Slug 38 gr- .217 10.5mm 18.5 ft.lbs 200 m 0.112 120 Heavy Slug 40 gr- .217 11.2mm 18.5 ft.lbs 200 m 0.116 120 Heavy Slug 34 gr- .218 9.6mm 18.5 ft.lbs 200 m 0.108 150 Heavy Slug 36 gr- .218 10.1mm 18.5 ft.lbs 200 m 0.109 150 Heavy Slug 38 gr- .218 10.5mm 18.5 ft.lbs 200 m 0.112 120 Heavy Slug 40 gr- .218 11.2mm 18.5 ft.lbs 200 m 0.116 120

H&N H&N | Slug HP II .22 Cal | 200pcs $16.99

Arken Optics Halo Scope Rings | PICATINNY Rings $64.99

Product Details ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency. Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher. SPECIFICATION Finish: Matte Black Material: 7075 T6 Aluminum Fit: MIL-STD picatinny rails.

DonnyFL Hatsan Blitz M18 X 1 Adapter A117 $39.99

This adapter allows you to screw on an airgun suppressor with M18x1 threads. ***New Improved For More Air Flow.*** I recommend going with the Ronin with this gun. I have it installed on my personal gun and it works flawlessly. However, results may vary and might need modification to work in semi auto mode. This gun is similar to the Bullmaster and others have been able to fix the issue by replacing the spring. Go to your hardware store and look for a lighter spring. I got mine from Ace hardware and it fixed the magazine indexing issue. Features: Compatible up to .30 caliber Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

DonnyFL Hatsan Bullmaster | Invader | Galatian 1/2 x 20 Moderator Adapter #A35 $39.99

#A35 Adapter 1/2 x 20 UNF adapter for those rapid firing Bullmaster. New and improve design to allow more air flow. Please note that when you add a suppressor to this gun, it does not properly index the magazine. It uses blowback air to advance the magazine however with a suppressor on, it over rotates and causes it to not properly index. If you plan to single load it'll work fine. Some customers have been able to get the gun to work properly by swapping out the spring inside the shroud with a different strength one. Will take trial an error. Similar to the Blitz, this guy may need a lighter spring to work with a suppressor. I got mine from Ace hardware. See picture Features: Compatible up to .30 caliber Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

DonnyFL Hatsan Jet 1 & Jet 2 Adapter | A111 $39.99

Features: Any gun that needs a double-sided male adapter Has through holes in the threads for easy tightening or loosening Matte Black Anodize threads .655 inches / 16.6 mm OD

Find anything you need

Fast Shipping

Quality Control

Mounting & Sighting