Products – Page 24 – The Pellet Shop

The FX Keller Digital Gauge, also known as Manometer, is a digital pressure gauge replacement for the FX Impact M3 PCP Air Rifle. It features incredible accuracy and consistency in a digital display format, making it essential for fine-tuning the air rifle's accuracy. The lithium battery is easy to swap and will last up to three years. FX Keller Digital Manometer Replaces factory gauges. lithium battery with up to 3 years of use and can be easily replaced. Works with FX Impact M3 models.

FX Airguns FX | Pocket Chronograph D1 $259.99

The new Pocket Chronograph D1 is a very tiny unit that fits in the palm of your hand. But don't let its size fool you as it is packed with a lot of useful features. Equipped with radar technology the D1 can measure velocities up to 1250FPS no matter the weather conditions and even in the dark. With a built-in screen, the D1 displays real-time velocities and detailed statistics, no separate display or smartphone required. When pairing the FX Pocket Chronograph D1 with the FX Radar app you unlock the full potential and get access to advanced features like shot string analysis, custom rifle library, custom bullet library, drop charts and much more!

Sold out

FX Airguns FX | STX Superior Liner (Pellet) $109.99

The groundbreaking Smooth Twist X barrel liner has been further perfected. FX Airguns proudly introduces the new FX Superior Smooth Twist X Barrel Liner (or FX Superior STX). The new Superior STX barrel liners are still created using the patented way of pressing the rifling into the barrel from the outside; but this is now done with a higher degree of precision, lower tolerance, and some other slight modifications that result in a superior liner to the standard STX liners.

DonnyFL FX/DonnyFL Moderator $119.99

This is a custom size that comes with your FX guns if you decide to upgrade the suppressor. Same length as the Tanto but larger in diameter. The outer diameter is comparable to the FX factory suppressor. Features: 1.36 x 5 inches Available in .25 & 30 Note: We recommend ordering 1 caliber size up to eliminate the chance of pellet clippingDISCLAIMER: The products on DonnyFL are INTENDED for the use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent for which it was intended for. It is your Responsibility to know the laws in your country, state, county and city and to fully comply with them. We don't recommend using this with the FX Panthera or FX Panthera Hunter.

Sold out

H&N H&N Slug HP II .25 Cal | 120 pcs $11.99

Weight 0.1 lbs Dimensions 2 × 2 × 2 in Diameter/Grain .250/32gr, .250/34gr, .250/36gr, .249/28gr, .249/30gr, .249/32gr, .249/34gr, .249/36gr, .250/28gr, .250/30gr Calibers .25

H&N H&N | Slug HP Heavy | .22 cal $14.99

Product Details: Length Min Muzzle Energy Max Distance B.C. Tin Count Heavy Slug 34 gr- .217 9.6mm 18.5 ft.lbs 200 m 0.108 150 Heavy Slug 36 gr- .217 10.1mm 18.5 ft.lbs 200 m 0.109 150 Heavy Slug 38 gr- .217 10.5mm 18.5 ft.lbs 200 m 0.112 120 Heavy Slug 40 gr- .217 11.2mm 18.5 ft.lbs 200 m 0.116 120 Heavy Slug 34 gr- .218 9.6mm 18.5 ft.lbs 200 m 0.108 150 Heavy Slug 36 gr- .218 10.1mm 18.5 ft.lbs 200 m 0.109 150 Heavy Slug 38 gr- .218 10.5mm 18.5 ft.lbs 200 m 0.112 120 Heavy Slug 40 gr- .218 11.2mm 18.5 ft.lbs 200 m 0.116 120

H&N H&N | Slug HP II .22 Cal | 200pcs $16.99

Sold out

Arken Optics Halo Scope Rings | PICATINNY Rings $64.99

Product Details ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency. Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher. SPECIFICATION Finish: Matte Black Material: 7075 T6 Aluminum Fit: MIL-STD picatinny rails.

DonnyFL Hatsan Blitz M18 X 1 Adapter A117 $39.99

This adapter allows you to screw on an airgun suppressor with M18x1 threads. ***New Improved For More Air Flow.*** I recommend going with the Ronin with this gun. I have it installed on my personal gun and it works flawlessly. However, results may vary and might need modification to work in semi auto mode. This gun is similar to the Bullmaster and others have been able to fix the issue by replacing the spring. Go to your hardware store and look for a lighter spring. I got mine from Ace hardware and it fixed the magazine indexing issue. Features: Compatible up to .30 caliber Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip Important information: The only Moderator that is recommended with the Blitz is the RONIN .25/.30 M18, #S20A Click Here

DonnyFL Hatsan Bullmaster | Invader | Galatian 1/2 x 20 Moderator Adapter #A35 $39.99

#A35 Adapter 1/2 x 20 UNF adapter for those rapid firing Bullmaster. New and improve design to allow more air flow. Please note that when you add a suppressor to this gun, it does not properly index the magazine. It uses blowback air to advance the magazine however with a suppressor on, it over rotates and causes it to not properly index. If you plan to single load it'll work fine. Some customers have been able to get the gun to work properly by swapping out the spring inside the shroud with a different strength one. Will take trial an error. Similar to the Blitz, this guy may need a lighter spring to work with a suppressor. I got mine from Ace hardware. See picture Features: Compatible up to .30 caliber Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

Sold out

DonnyFL Hatsan Jet 1 & Jet 2 Adapter | A111 $39.99

Features: Any gun that needs a double-sided male adapter Has through holes in the threads for easy tightening or loosening Matte Black Anodize threads .655 inches / 16.6 mm OD

Sold out

DonnyFL Hatsan QE Moderator Adapter A24 $44.99

Adapters are threaded for attaching a moderator Thread: 1/2 x 20 UNF Please note: I highly suggest getting a suppressor one size up from what your gun is. For example if you have a .25, get a .30. If you have a .30, the .30 cal suppressor is fine. This is to minimize the chance of the gun clipping. Also if you have a Hatsan Bully .25/.30, based on customer's feedback I would go with the Emperor. *We have not had any success with customers using a suppressor on Hatsan's line up of semi auto guns. It causes the gun to not index properly. Features: Matte black Anodized CNC Includes knurled thread protector Compatible up to .30 Compatible with the following guns: Hatsan GladiusHatsan Flash Wood QEHatsan AirMaxHatsan Bullboss QEHatsan BT65 QEHatsan Nova QEHatsan AT44-10 QEHatsan Hercules QEHatsan Flashpup QEHatsan AT P1Hatsan Flash QE

Sold out 3% sale

Hatsan Hatsan | Jet II $299.99 $289.99

HATSAN JET 2 Convertible pistol or rifle Includes removable synthetic stock PCP 2x 40cc air cylinder fills to 3,625 PSI/250 BAR Magazine capacity: 8 rounds (.177) | 7 rounds (.22) | 6 rounds (.25) Integrated manometer Max. velocity (lead-free): 810 FPS (.177) | 700 FPS (.22) | 611 FPS (.25) Max. velocity (lead): 788 FPS (.177) | 700 FPS (.22) | 608 FPS (.25) Max. energy: 9.7 FPE (.177) | 15.6 FPE (.22) | 16.5 FPE (.25) Length-adjustable buttstock Elevation-adjustable cheek rest Ridged rubber buttpad Flip-up fiber optic front sight Flip-up adjustable fiber optic rear sight 11mm Dovetail optics rail Picatinny accessory rail Barrel length: 7.9" Overall length (pistol): 15" Overall length (rifle): 22.8"-24.6" Overall weight (pistol): 2 lbs. Overall weight (rifle): 2.9 lbs. Includes 2 magazines, single shot tray, cylinder adapter, and spare o-rings

-26% sale

Hatsan Hatsan | Jet Magazines $14.99 $19.99

Hatsan Jet Magazine Compatible with Hatsan Jet I and Hatsan Jet II .177 Cal - 8 Round capacity .22 Cal - 7 Round capacity .25 Cal - 6 Round capacity

Sold out

Element Optics HELIX Gen 2 | 4-16x44mm | FFP $539.99

MAGNIFICATION RANGE 4-16x TUBE DIAMETER 30mm OBJECTIVE LENS DIAMETER 44mm EXIT PUPIL 11-2.75mm EYE RELIEF 4” (102mm) FIELD OF VIEW 30.1-7.5 ft @ 100yds (10.1-2.5m @ 100m) CLICK VALUE 1/4 MOA (20 MOA / REV) 1/10 MRAD (8 MRAD / REV) ELEVATION ADJUSTMENT RANGE 90 MOA 26.1 MRAD WINDAGE ADJUSTMENT RANGE 45 MOA 13 MRAD MINIMUM PARALLAX 15 YDS 15 METERS LENGTH 13.8 Inches 350 mm WEIGHT 28.5oz 808g

Find anything you need

Fast Shipping

Quality Control

Mounting & Sighting